我的书签
添加书签
移除书签Up to date
This page is up to date for Godot 4.1. If you still find outdated information, please open an issue.
Generic6DOFJoint3D
Inherits: Joint3D < Node3D < Node < Object
A physics joint that allows for complex movement and rotation between two 3D physics bodies.
Description
The Generic6DOFJoint3D (6 Degrees Of Freedom) joint allows for implementing custom types of joints by locking the rotation and translation of certain axes.
The first 3 DOF represent the linear motion of the physics bodies and the last 3 DOF represent the angular motion of the physics bodies. Each axis can be either locked, or limited.
Properties
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
|
Methods
get_flag_x ( Flag flag ) const | |
get_flag_y ( Flag flag ) const | |
get_flag_z ( Flag flag ) const | |
get_param_x ( Param param ) const | |
get_param_y ( Param param ) const | |
get_param_z ( Param param ) const | |
void | set_flag_x ( Flag flag, bool value ) |
void | set_flag_y ( Flag flag, bool value ) |
void | set_flag_z ( Flag flag, bool value ) |
void | set_param_x ( Param param, float value ) |
void | set_param_y ( Param param, float value ) |
void | set_param_z ( Param param, float value ) |
Enumerations
enum Param:
Param PARAM_LINEAR_LOWER_LIMIT = 0
The minimum difference between the pivot points’ axes.
Param PARAM_LINEAR_UPPER_LIMIT = 1
The maximum difference between the pivot points’ axes.
Param PARAM_LINEAR_LIMIT_SOFTNESS = 2
A factor applied to the movement across the axes. The lower, the slower the movement.
Param PARAM_LINEAR_RESTITUTION = 3
The amount of restitution on the axes’ movement. The lower, the more momentum gets lost.
Param PARAM_LINEAR_DAMPING = 4
The amount of damping that happens at the linear motion across the axes.
Param PARAM_LINEAR_MOTOR_TARGET_VELOCITY = 5
The velocity the linear motor will try to reach.
Param PARAM_LINEAR_MOTOR_FORCE_LIMIT = 6
The maximum force the linear motor will apply while trying to reach the velocity target.
Param PARAM_LINEAR_SPRING_STIFFNESS = 7
Param PARAM_LINEAR_SPRING_DAMPING = 8
Param PARAM_LINEAR_SPRING_EQUILIBRIUM_POINT = 9
Param PARAM_ANGULAR_LOWER_LIMIT = 10
The minimum rotation in negative direction to break loose and rotate around the axes.
Param PARAM_ANGULAR_UPPER_LIMIT = 11
The minimum rotation in positive direction to break loose and rotate around the axes.
Param PARAM_ANGULAR_LIMIT_SOFTNESS = 12
The speed of all rotations across the axes.
Param PARAM_ANGULAR_DAMPING = 13
The amount of rotational damping across the axes. The lower, the more damping occurs.
Param PARAM_ANGULAR_RESTITUTION = 14
The amount of rotational restitution across the axes. The lower, the more restitution occurs.
Param PARAM_ANGULAR_FORCE_LIMIT = 15
The maximum amount of force that can occur, when rotating around the axes.
Param PARAM_ANGULAR_ERP = 16
When rotating across the axes, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
Param PARAM_ANGULAR_MOTOR_TARGET_VELOCITY = 17
Target speed for the motor at the axes.
Param PARAM_ANGULAR_MOTOR_FORCE_LIMIT = 18
Maximum acceleration for the motor at the axes.
Param PARAM_ANGULAR_SPRING_STIFFNESS = 19
Param PARAM_ANGULAR_SPRING_DAMPING = 20
Param PARAM_ANGULAR_SPRING_EQUILIBRIUM_POINT = 21
Param PARAM_MAX = 22
Represents the size of the Param enum.
enum Flag:
Flag FLAG_ENABLE_LINEAR_LIMIT = 0
If enabled, linear motion is possible within the given limits.
Flag FLAG_ENABLE_ANGULAR_LIMIT = 1
If enabled, rotational motion is possible within the given limits.
Flag FLAG_ENABLE_LINEAR_SPRING = 3
Flag FLAG_ENABLE_ANGULAR_SPRING = 2
Flag FLAG_ENABLE_MOTOR = 4
If enabled, there is a rotational motor across these axes.
Flag FLAG_ENABLE_LINEAR_MOTOR = 5
If enabled, there is a linear motor across these axes.
Flag FLAG_MAX = 6
Represents the size of the Flag enum.
Property Descriptions
float angular_limit_x/damping = 1.0
The amount of rotational damping across the X axis.
The lower, the longer an impulse from one side takes to travel to the other side.
bool angular_limit_x/enabled = true
If true, rotation across the X axis is limited.
float angular_limit_x/erp = 0.5
When rotating across the X axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
float angular_limit_x/force_limit = 0.0
The maximum amount of force that can occur, when rotating around the X axis.
float angular_limit_x/lower_angle = 0.0
The minimum rotation in negative direction to break loose and rotate around the X axis.
float angular_limit_x/restitution = 0.0
The amount of rotational restitution across the X axis. The lower, the more restitution occurs.
float angular_limit_x/softness = 0.5
The speed of all rotations across the X axis.
float angular_limit_x/upper_angle = 0.0
The minimum rotation in positive direction to break loose and rotate around the X axis.
float angular_limit_y/damping = 1.0
The amount of rotational damping across the Y axis. The lower, the more damping occurs.
bool angular_limit_y/enabled = true
If true, rotation across the Y axis is limited.
float angular_limit_y/erp = 0.5
When rotating across the Y axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
float angular_limit_y/force_limit = 0.0
The maximum amount of force that can occur, when rotating around the Y axis.
float angular_limit_y/lower_angle = 0.0
The minimum rotation in negative direction to break loose and rotate around the Y axis.
float angular_limit_y/restitution = 0.0
The amount of rotational restitution across the Y axis. The lower, the more restitution occurs.
float angular_limit_y/softness = 0.5
The speed of all rotations across the Y axis.
float angular_limit_y/upper_angle = 0.0
The minimum rotation in positive direction to break loose and rotate around the Y axis.
float angular_limit_z/damping = 1.0
The amount of rotational damping across the Z axis. The lower, the more damping occurs.
bool angular_limit_z/enabled = true
If true, rotation across the Z axis is limited.
float angular_limit_z/erp = 0.5
When rotating across the Z axis, this error tolerance factor defines how much the correction gets slowed down. The lower, the slower.
float angular_limit_z/force_limit = 0.0
The maximum amount of force that can occur, when rotating around the Z axis.
float angular_limit_z/lower_angle = 0.0
The minimum rotation in negative direction to break loose and rotate around the Z axis.
float angular_limit_z/restitution = 0.0
The amount of rotational restitution across the Z axis. The lower, the more restitution occurs.
float angular_limit_z/softness = 0.5
The speed of all rotations across the Z axis.
float angular_limit_z/upper_angle = 0.0
The minimum rotation in positive direction to break loose and rotate around the Z axis.
bool angular_motor_x/enabled = false
If true, a rotating motor at the X axis is enabled.
float angular_motor_x/force_limit = 300.0
Maximum acceleration for the motor at the X axis.
float angular_motor_x/target_velocity = 0.0
Target speed for the motor at the X axis.
bool angular_motor_y/enabled = false
If true, a rotating motor at the Y axis is enabled.
float angular_motor_y/force_limit = 300.0
Maximum acceleration for the motor at the Y axis.
float angular_motor_y/target_velocity = 0.0
Target speed for the motor at the Y axis.
bool angular_motor_z/enabled = false
If true, a rotating motor at the Z axis is enabled.
float angular_motor_z/force_limit = 300.0
Maximum acceleration for the motor at the Z axis.
float angular_motor_z/target_velocity = 0.0
Target speed for the motor at the Z axis.
float angular_spring_x/damping = 0.0
There is currently no description for this property. Please help us by contributing one!
bool angular_spring_x/enabled = false
There is currently no description for this property. Please help us by contributing one!
float angular_spring_x/equilibrium_point = 0.0
There is currently no description for this property. Please help us by contributing one!
float angular_spring_x/stiffness = 0.0
There is currently no description for this property. Please help us by contributing one!
float angular_spring_y/damping = 0.0
There is currently no description for this property. Please help us by contributing one!
bool angular_spring_y/enabled = false
There is currently no description for this property. Please help us by contributing one!
float angular_spring_y/equilibrium_point = 0.0
There is currently no description for this property. Please help us by contributing one!
float angular_spring_y/stiffness = 0.0
There is currently no description for this property. Please help us by contributing one!
float angular_spring_z/damping = 0.0
There is currently no description for this property. Please help us by contributing one!
bool angular_spring_z/enabled = false
There is currently no description for this property. Please help us by contributing one!
float angular_spring_z/equilibrium_point = 0.0
There is currently no description for this property. Please help us by contributing one!
float angular_spring_z/stiffness = 0.0
There is currently no description for this property. Please help us by contributing one!
float linear_limit_x/damping = 1.0
The amount of damping that happens at the X motion.
bool linear_limit_x/enabled = true
If true, the linear motion across the X axis is limited.
float linear_limit_x/lower_distance = 0.0
The minimum difference between the pivot points’ X axis.
float linear_limit_x/restitution = 0.5
The amount of restitution on the X axis movement. The lower, the more momentum gets lost.
float linear_limit_x/softness = 0.7
A factor applied to the movement across the X axis. The lower, the slower the movement.
float linear_limit_x/upper_distance = 0.0
The maximum difference between the pivot points’ X axis.
float linear_limit_y/damping = 1.0
The amount of damping that happens at the Y motion.
bool linear_limit_y/enabled = true
If true, the linear motion across the Y axis is limited.
float linear_limit_y/lower_distance = 0.0
The minimum difference between the pivot points’ Y axis.
float linear_limit_y/restitution = 0.5
The amount of restitution on the Y axis movement. The lower, the more momentum gets lost.
float linear_limit_y/softness = 0.7
A factor applied to the movement across the Y axis. The lower, the slower the movement.
float linear_limit_y/upper_distance = 0.0
The maximum difference between the pivot points’ Y axis.
float linear_limit_z/damping = 1.0
The amount of damping that happens at the Z motion.
bool linear_limit_z/enabled = true
If true, the linear motion across the Z axis is limited.
float linear_limit_z/lower_distance = 0.0
The minimum difference between the pivot points’ Z axis.
float linear_limit_z/restitution = 0.5
The amount of restitution on the Z axis movement. The lower, the more momentum gets lost.
float linear_limit_z/softness = 0.7
A factor applied to the movement across the Z axis. The lower, the slower the movement.
float linear_limit_z/upper_distance = 0.0
The maximum difference between the pivot points’ Z axis.
bool linear_motor_x/enabled = false
If true, then there is a linear motor on the X axis. It will attempt to reach the target velocity while staying within the force limits.
float linear_motor_x/force_limit = 0.0
The maximum force the linear motor can apply on the X axis while trying to reach the target velocity.
float linear_motor_x/target_velocity = 0.0
The speed that the linear motor will attempt to reach on the X axis.
bool linear_motor_y/enabled = false
If true, then there is a linear motor on the Y axis. It will attempt to reach the target velocity while staying within the force limits.
float linear_motor_y/force_limit = 0.0
The maximum force the linear motor can apply on the Y axis while trying to reach the target velocity.
float linear_motor_y/target_velocity = 0.0
The speed that the linear motor will attempt to reach on the Y axis.
bool linear_motor_z/enabled = false
If true, then there is a linear motor on the Z axis. It will attempt to reach the target velocity while staying within the force limits.
float linear_motor_z/force_limit = 0.0
The maximum force the linear motor can apply on the Z axis while trying to reach the target velocity.
float linear_motor_z/target_velocity = 0.0
The speed that the linear motor will attempt to reach on the Z axis.
float linear_spring_x/damping = 0.01
There is currently no description for this property. Please help us by contributing one!
bool linear_spring_x/enabled = false
There is currently no description for this property. Please help us by contributing one!
float linear_spring_x/equilibrium_point = 0.0
There is currently no description for this property. Please help us by contributing one!
float linear_spring_x/stiffness = 0.01
There is currently no description for this property. Please help us by contributing one!
float linear_spring_y/damping = 0.01
There is currently no description for this property. Please help us by contributing one!
bool linear_spring_y/enabled = false
There is currently no description for this property. Please help us by contributing one!
float linear_spring_y/equilibrium_point = 0.0
There is currently no description for this property. Please help us by contributing one!
float linear_spring_y/stiffness = 0.01
There is currently no description for this property. Please help us by contributing one!
float linear_spring_z/damping = 0.01
There is currently no description for this property. Please help us by contributing one!
bool linear_spring_z/enabled = false
There is currently no description for this property. Please help us by contributing one!
float linear_spring_z/equilibrium_point = 0.0
There is currently no description for this property. Please help us by contributing one!
float linear_spring_z/stiffness = 0.01
There is currently no description for this property. Please help us by contributing one!
Method Descriptions
bool get_flag_x ( Flag flag ) const
There is currently no description for this method. Please help us by contributing one!
bool get_flag_y ( Flag flag ) const
There is currently no description for this method. Please help us by contributing one!
bool get_flag_z ( Flag flag ) const
There is currently no description for this method. Please help us by contributing one!
float get_param_x ( Param param ) const
There is currently no description for this method. Please help us by contributing one!
float get_param_y ( Param param ) const
There is currently no description for this method. Please help us by contributing one!
float get_param_z ( Param param ) const
There is currently no description for this method. Please help us by contributing one!
void set_flag_x ( Flag flag, bool value )
There is currently no description for this method. Please help us by contributing one!
void set_flag_y ( Flag flag, bool value )
There is currently no description for this method. Please help us by contributing one!
void set_flag_z ( Flag flag, bool value )
There is currently no description for this method. Please help us by contributing one!
void set_param_x ( Param param, float value )
There is currently no description for this method. Please help us by contributing one!
void set_param_y ( Param param, float value )
There is currently no description for this method. Please help us by contributing one!
void set_param_z ( Param param, float value )
There is currently no description for this method. Please help us by contributing one!
