Register Downstream Clusters

Overview

There are two specific styles to registering clusters. These styles will be referred to as agent-initiated and manager-initiated registration. Typically one would go with the agent-initiated registration but there are specific use cases in which manager-initiated is a better workflow.

Agent-Initiated Registration

Agent-initiated refers to a pattern in which the downstream cluster installs an agent with a cluster registration token and optionally a client ID. The cluster agent will then make a API request to the Fleet manager and initiate the registration process. Using this process the Manager will never make an outbound API request to the downstream clusters and will thus never need to have direct network access. The downstream cluster only needs to make outbound HTTPS calls to the manager.

Manager-Initiated Registration

Manager-initiated registration is a process in which you register an existing Kubernetes cluster with the Fleet manager and the Fleet manager will make an API call to the downstream cluster to deploy the agent. This style can place additional network access requirements because the Fleet manager must be able to communicate with the downstream cluster API server for the registration process. After the cluster is registered there is no further need for the manager to contact the downstream cluster API. This style is more compatible if you wish to manage the creation of all your Kubernetes clusters through GitOps using something like cluster-api or Rancher.

Agent Initiated

A downstream cluster is registered by installing an agent via helm and using the cluster registration token and optionally a client ID or cluster labels.

Register Downstream Clusters - 图1info

It’s not necessary to configure the fleet manager for multi cluster, as the downstream agent we install via Helm will connect to the Kubernetes API of the upstream cluster directly.

Agent-initiated registration is normally not used with Rancher.

Cluster Registration Token and Client ID

The cluster registration token is a credential that will authorize the downstream cluster agent to be able to initiate the registration process. This is required. The cluster registration token is manifested as a values.yaml file that will be passed to the helm install process. Alternatively one can pass the token directly to the helm install command via --set token="$token".

There are two styles of registering an agent. You can have the cluster for this agent dynamically created, in which case you will probably want to specify cluster labels upon registration. Or you can have the agent register to a predefined cluster in the Fleet manager, in which case you will need a client ID. The former approach is typically the easiest.

Install Agent For a New Cluster

The Fleet agent is installed as a Helm chart. Following are explanations how to determine and set its parameters.

First, follow the cluster registration token instructions to obtain the values.yaml which contains the registration token to authenticate against the Fleet cluster.

Second, optionally you can define labels that will assigned to the newly created cluster upon registration. After registration is completed an agent cannot change the labels of the cluster. To add cluster labels add --set-string labels.KEY=VALUE to the below Helm command. To add the labels foo=bar and bar=baz then you would add --set-string labels.foo=bar --set-string labels.bar=baz to the command line.

  1. # Leave blank if you do not want any labels
  2. CLUSTER_LABELS="--set-string labels.example=true --set-string labels.env=dev"

Third, set variables with the Fleet cluster’s API Server URL and CA, for the downstream cluster to use for connecting.

  1. API_SERVER_URL=https://...
  2. API_SERVER_CA_DATA=...

Value in API_SERVER_CA_DATA can be obtained from a .kube/config file with valid data to connect to the upstream cluster (under the certificate-authority-data key). Alternatively it can be obtained from within the upstream cluster itself, by looking up the default ServiceAccount secret name (typically prefixed with default-token-, in the default namespace), under the ca.crt key.

Register Downstream Clusters - 图2caution

Use proper namespace and release name: For the agent chart the namespace must be cattle-fleet-system and the release name fleet-agent

Register Downstream Clusters - 图3Kubectl Context

Ensure you are installing to the right cluster: Helm will use the default context in ${HOME}/.kube/config to deploy the agent. Use --kubeconfig and --kube-context to change which cluster Helm is installing to.

Register Downstream Clusters - 图4Fleet in Rancher

Rancher has separate helm charts for Fleet and uses a different repository.

Add Fleet’s Helm repo.

  1. helm repo add fleet https://rancher.github.io/fleet-helm-charts/

Finally, install the agent using Helm.

  • Install
  • Validate
  1. helm -n cattle-fleet-system install --create-namespace --wait \
  2.     $CLUSTER_LABELS \
  3.     --values values.yaml \
  4.     --set apiServerCA="$API_SERVER_CA_DATA" \
  5.     --set apiServerURL="$API_SERVER_URL" \
  6.     fleet-agent fleet/fleet-agent

You can check that status of the fleet pods by running the below commands.

  1. # Ensure kubectl is pointing to the right cluster
  2. kubectl -n cattle-fleet-system logs -l app=fleet-agent
  3. kubectl -n cattle-fleet-system get pods -l app=fleet-agent

The agent should now be deployed.

Additionally you should see a new cluster registered in the Fleet manager. Below is an example of checking that a new cluster was registered in the clusters namespace. Please ensure your ${HOME}/.kube/config is pointed to the Fleet manager to run this command.

  1. kubectl -n clusters get clusters.fleet.cattle.io
  1. NAME                   BUNDLES-READY   NODES-READY   SAMPLE-NODE             LAST-SEEN              STATUS
  2. cluster-ab13e54400f1   1/1             1/1           k3d-cluster2-server-0   2020-08-31T19:23:10Z

Install Agent For a Predefined Cluster

Client IDs are for the purpose of predefining clusters in the Fleet manager with existing labels and repos targeted to them. A client ID is not required and is just one approach to managing clusters. The client ID is a unique string that will identify the cluster. This string is user generated and opaque to the Fleet manager and agent. It is assumed to be sufficiently unique. For security reasons one should not be able to easily guess this value as then one cluster could impersonate another. The client ID is optional and if not specified the UID field of the kube-system namespace resource will be used as the client ID. Upon registration if the client ID is found on a Cluster resource in the Fleet manager it will associate the agent with that Cluster. If no Cluster resource is found with that client ID a new Cluster resource will be created with the specific client ID.

The Fleet agent is installed as a Helm chart. The only parameters to the helm chart installation should be the cluster registration token, which is represented by the values.yaml file and the client ID. The client ID is optional.

First, create a Cluster in the Fleet Manager with the random client ID you have chosen.

  1. kind: Cluster
  2. apiVersion: fleet.cattle.io/v1alpha1
  3. metadata:
  4.   name: my-cluster
  5.   namespace: clusters
  6. spec:
  7.   clientID: "really-random"

Second, follow the [cluster registration token instructions]((#create-cluster-registration-tokens) to obtain the values.yaml file to be used.

Third, setup your environment to use the client ID.

  1. CLUSTER_CLIENT_ID="really-random"

Register Downstream Clusters - 图5note

Use proper namespace and release name: For the agent chart the namespace must be cattle-fleet-system and the release name fleet-agent

Register Downstream Clusters - 图6note

Ensure you are installing to the right cluster: Helm will use the default context in ${HOME}/.kube/config to deploy the agent. Use --kubeconfig and --kube-context to change which cluster Helm is installing to.

Add Fleet’s Helm repo.

  1. helm repo add fleet https://rancher.github.io/fleet-helm-charts/

Finally, install the agent using Helm.

  • Install
  • Validate
  1. helm -n cattle-fleet-system install --create-namespace --wait \
  2.     --set clientID="$CLUSTER_CLIENT_ID" \
  3.     --values values.yaml \
  4.     fleet-agent fleet/fleet-agent

You can check that status of the fleet pods by running the below commands.

  1. # Ensure kubectl is pointing to the right cluster
  2. kubectl -n cattle-fleet-system logs -l app=fleet-agent
  3. kubectl -n cattle-fleet-system get pods -l app=fleet-agent

The agent should now be deployed.

Additionally you should see a new cluster registered in the Fleet manager. Below is an example of checking that a new cluster was registered in the clusters namespace. Please ensure your ${HOME}/.kube/config is pointed to the Fleet manager to run this command.

  1. kubectl -n clusters get clusters.fleet.cattle.io
  1. NAME                   BUNDLES-READY   NODES-READY   SAMPLE-NODE             LAST-SEEN              STATUS
  2. my-cluster             1/1             1/1           k3d-cluster2-server-0   2020-08-31T19:23:10Z

Create Cluster Registration Tokens

Register Downstream Clusters - 图7info

Not needed for Manager-initiated registration: For manager-initiated registrations the token is managed by the Fleet manager and does not need to be manually created and obtained.

For an agent-initiated registration the downstream cluster must have a cluster registration token. Cluster registration tokens are used to establish a new identity for a cluster. Internally cluster registration tokens are managed by creating Kubernetes service accounts that have the permissions to create ClusterRegistrationRequests within a specific namespace. Once the cluster is registered a new ServiceAccount is created for that cluster that is used as the unique identity of the cluster. The agent is designed to forget the cluster registration token after registration. While the agent will not maintain a reference to the cluster registration token after a successful registration please note that usually other system bootstrap scripts do.

Since the cluster registration token is forgotten, if you need to re-register a cluster you must give the cluster a new registration token.

Token TTL

Cluster registration tokens can be reused by any cluster in a namespace. The tokens can be given a TTL such that it will expire after a specific time.

Create a new Token

The ClusterRegistationToken is a namespaced type and should be created in the same namespace in which you will create GitRepo and ClusterGroup resources. For in depth details on how namespaces are used in Fleet refer to the documentation on namespaces. Create a new token with the below YAML.

  1. kind: ClusterRegistrationToken
  2. apiVersion: "fleet.cattle.io/v1alpha1"
  3. metadata:
  4.     name: new-token
  5.     namespace: clusters
  6. spec:
  7.     # A duration string for how long this token is valid for. A value <= 0 or null means infinite time.
  8.     ttl: 240h

After the ClusterRegistrationToken is created, Fleet will create a corresponding Secret with the same name. As the Secret creation is performed asynchronously, you will need to wait until it’s available before using it.

One way to do so is via the following one-liner:

  1. while ! kubectl --namespace=clusters  get secret new-token; do sleep 5; done

Obtaining Token Value (Agent values.yaml)

The token value contains YAML content for a values.yaml file that is expected to be passed to helm install to install the Fleet agent on a downstream cluster.

Such value is contained in the values field of the Secret mentioned above. To obtain the YAML content for the above example one can run the following one-liner:

  1. kubectl --namespace clusters get secret new-token -o 'jsonpath={.data.values}' | base64 --decode > values.yaml

Once the values.yaml is ready it can be used repeatedly by clusters to register until the TTL expires.

Manager Initiated

The manager-initiated registration flow is accomplished by creating a Cluster resource in the Fleet Manager that refers to a Kubernetes Secret containing a valid kubeconfig file in the data field called value.

Register Downstream Clusters - 图8info

If you are using Fleet standalone without Rancher, it must be installed as described in installation details.

The manager-initiated registration is used when you add a cluster from the Rancher dashboard.

Create Kubeconfig Secret

The format of this secret is intended to match the format of the kubeconfig secret used in cluster-api. This means you can use cluster-api to create a cluster that is dynamically registered with Fleet.

Kubeconfig Secret Example

  1. kind: Secret
  2. apiVersion: v1
  3. metadata:
  4.   name: my-cluster-kubeconfig
  5.   namespace: clusters
  6. data:
  7.   value: YXBpVmVyc2lvbjogdjEKY2x1c3RlcnM6Ci0gY2x1c3RlcjoKICAgIHNlcnZlcjogaHR0cHM6Ly9leGFtcGxlLmNvbTo2NDQzCiAgbmFtZTogY2x1c3Rlcgpjb250ZXh0czoKLSBjb250ZXh0OgogICAgY2x1c3RlcjogY2x1c3RlcgogICAgdXNlcjogdXNlcgogIG5hbWU6IGRlZmF1bHQKY3VycmVudC1jb250ZXh0OiBkZWZhdWx0CmtpbmQ6IENvbmZpZwpwcmVmZXJlbmNlczoge30KdXNlcnM6Ci0gbmFtZTogdXNlcgogIHVzZXI6CiAgICB0b2tlbjogc29tZXRoaW5nCg==

Create Cluster Resource

The cluster resource needs to reference the kubeconfig secret.

Cluster Resource Example

  1. apiVersion: fleet.cattle.io/v1alpha1
  2. kind: Cluster
  3. metadata:
  4.   name: my-cluster
  5.   namespace: clusters
  6.   labels:
  7.     demo: "true"
  8.     env: dev
  9. spec:
  10.   kubeConfigSecret: my-cluster-kubeconfig