How to use Django’s CSRF protection

To take advantage of CSRF protection in your views, follow these steps:

1. The CSRF middleware is activated by default in the MIDDLEWARE setting. If you override that setting, remember that 'django.middleware.csrf.CsrfViewMiddleware' should come before any view middleware that assume that CSRF attacks have been dealt with.

   If you disabled it, which is not recommended, you can use csrf_protect() on particular views you want to protect (see below).

2. In any template that uses a POST form, use the csrf_token tag inside the <form> element if the form is for an internal URL, e.g.:

   <form method="post">{% csrf_token %}

   This should not be done for POST forms that target external URLs, since that would cause the CSRF token to be leaked, leading to a vulnerability.

3. In the corresponding view functions, ensure that RequestContext is used to render the response so that {% csrf_token %} will work properly. If you’re using the render() function, generic views, or contrib apps, you are covered already since these all use RequestContext.

Using CSRF protection with AJAX

While the above method can be used for AJAX POST requests, it has some inconveniences: you have to remember to pass the CSRF token in as POST data with every POST request. For this reason, there is an alternative method: on each XMLHttpRequest, set a custom X-CSRFToken header (as specified by the CSRF_HEADER_NAME setting) to the value of the CSRF token. This is often easier because many JavaScript frameworks provide hooks that allow headers to be set on every request.

First, you must get the CSRF token. How to do that depends on whether or not the CSRF_USE_SESSIONS and CSRF_COOKIE_HTTPONLY settings are enabled.

Acquiring the token if CSRF_USE_SESSIONS and CSRF_COOKIE_HTTPONLY are False

The recommended source for the token is the csrftoken cookie, which will be set if you’ve enabled CSRF protection for your views as outlined above.

The CSRF token cookie is named csrftoken by default, but you can control the cookie name via the CSRF_COOKIE_NAME setting.

You can acquire the token like this:

function getCookie(name) {
    let cookieValue = null;
    if (document.cookie && document.cookie !== '') {
        const cookies = document.cookie.split(';');
        for (let i = 0; i < cookies.length; i++) {
            const cookie = cookies[i].trim();
            // Does this cookie string begin with the name we want?
            if (cookie.substring(0, name.length + 1) === (name + '=')) {
                cookieValue = decodeURIComponent(cookie.substring(name.length + 1));
                break;
            }
        }
    }
    return cookieValue;
}
const csrftoken = getCookie('csrftoken');

The above code could be simplified by using the JavaScript Cookie library to replace getCookie:

const csrftoken = Cookies.get('csrftoken');

备注

The CSRF token is also present in the DOM in a masked form, but only if explicitly included using csrf_token in a template. The cookie contains the canonical, unmasked token. The CsrfViewMiddleware will accept either. However, in order to protect against BREACH attacks, it’s recommended to use a masked token.

警告

If your view is not rendering a template containing the csrf_token template tag, Django might not set the CSRF token cookie. This is common in cases where forms are dynamically added to the page. To address this case, Django provides a view decorator which forces setting of the cookie: ensure_csrf_cookie().

Acquiring the token if CSRF_USE_SESSIONS or CSRF_COOKIE_HTTPONLY is True

If you activate CSRF_USE_SESSIONS or CSRF_COOKIE_HTTPONLY, you must include the CSRF token in your HTML and read the token from the DOM with JavaScript:

{% csrf_token %}
<script>
const csrftoken = document.querySelector('[name=csrfmiddlewaretoken]').value;
</script>

Setting the token on the AJAX request

Finally, you’ll need to set the header on your AJAX request. Using the fetch() API:

const request = new Request(
    /* URL */,
    {
        method: 'POST',
        headers: {'X-CSRFToken': csrftoken},
        mode: 'same-origin' // Do not send CSRF token to another domain.
    }
);
fetch(request).then(function(response) {
    // ...
});

Using CSRF protection in Jinja2 templates

Django’s Jinja2 template backend adds {{ csrf_input }} to the context of all templates which is equivalent to {% csrf_token %} in the Django template language. For example:

<form method="post">{{ csrf_input }}

Using the decorator method

Rather than adding CsrfViewMiddleware as a blanket protection, you can use the csrf_protect() decorator, which has exactly the same functionality, on particular views that need the protection. It must be used both on views that insert the CSRF token in the output, and on those that accept the POST form data. (These are often the same view function, but not always).

Use of the decorator by itself is not recommended, since if you forget to use it, you will have a security hole. The ‘belt and braces’ strategy of using both is fine, and will incur minimal overhead.

Handling rejected requests

By default, a ‘403 Forbidden’ response is sent to the user if an incoming request fails the checks performed by CsrfViewMiddleware. This should usually only be seen when there is a genuine Cross Site Request Forgery, or when, due to a programming error, the CSRF token has not been included with a POST form.

The error page, however, is not very friendly, so you may want to provide your own view for handling this condition. To do this, set the CSRF_FAILURE_VIEW setting.

CSRF failures are logged as warnings to the django.security.csrf logger.

Using CSRF protection with caching

If the csrf_token template tag is used by a template (or the get_token function is called some other way), CsrfViewMiddleware will add a cookie and a Vary: Cookie header to the response. This means that the middleware will play well with the cache middleware if it is used as instructed (UpdateCacheMiddleware goes before all other middleware).

However, if you use cache decorators on individual views, the CSRF middleware will not yet have been able to set the Vary header or the CSRF cookie, and the response will be cached without either one. In this case, on any views that will require a CSRF token to be inserted you should use the django.views.decorators.csrf.csrf_protect() decorator first:

from django.views.decorators.cache import cache_page
from django.views.decorators.csrf import csrf_protect
@cache_page(60 * 15)
@csrf_protect
def my_view(request):
    ...

If you are using class-based views, you can refer to Decorating class-based views.

Testing and CSRF protection

The CsrfViewMiddleware will usually be a big hindrance to testing view functions, due to the need for the CSRF token which must be sent with every POST request. For this reason, Django’s HTTP client for tests has been modified to set a flag on requests which relaxes the middleware and the csrf_protect decorator so that they no longer rejects requests. In every other respect (e.g. sending cookies etc.), they behave the same.

If, for some reason, you want the test client to perform CSRF checks, you can create an instance of the test client that enforces CSRF checks:

>>> from django.test import Client
>>> csrf_client = Client(enforce_csrf_checks=True)

Edge cases

Certain views can have unusual requirements that mean they don’t fit the normal pattern envisaged here. A number of utilities can be useful in these situations. The scenarios they might be needed in are described in the following section.

Disabling CSRF protection for just a few views

Most views requires CSRF protection, but a few do not.

Solution: rather than disabling the middleware and applying csrf_protect to all the views that need it, enable the middleware and use csrf_exempt().

Setting the token when CsrfViewMiddleware.process_view() is not used

There are cases when CsrfViewMiddleware.process_view may not have run before your view is run - 404 and 500 handlers, for example - but you still need the CSRF token in a form.

Solution: use requires_csrf_token()

Including the CSRF token in an unprotected view

There may be some views that are unprotected and have been exempted by csrf_exempt, but still need to include the CSRF token.

Solution: use csrf_exempt() followed by requires_csrf_token(). (i.e. requires_csrf_token should be the innermost decorator).

Protecting a view for only one path

A view needs CSRF protection under one set of conditions only, and mustn’t have it for the rest of the time.

Solution: use csrf_exempt() for the whole view function, and csrf_protect() for the path within it that needs protection. Example:

from django.views.decorators.csrf import csrf_exempt, csrf_protect
@csrf_exempt
def my_view(request):
    @csrf_protect
    def protected_path(request):
        do_something()
    if some_condition():
       return protected_path(request)
    else:
       do_something_else()

Protecting a page that uses AJAX without an HTML form

A page makes a POST request via AJAX, and the page does not have an HTML form with a csrf_token that would cause the required CSRF cookie to be sent.

Solution: use ensure_csrf_cookie() on the view that sends the page.

CSRF protection in reusable applications

Because it is possible for the developer to turn off the CsrfViewMiddleware, all relevant views in contrib apps use the csrf_protect decorator to ensure the security of these applications against CSRF. It is recommended that the developers of other reusable apps that want the same guarantees also use the csrf_protect decorator on their views.