Cross Site Request Forgery protection

The CSRF middleware and template tag provides easy-to-use protection against Cross Site Request Forgeries. This type of attack occurs when a malicious website contains a link, a form button or some JavaScript that is intended to perform some action on your website, using the credentials of a logged-in user who visits the malicious site in their browser. A related type of attack, ‘login CSRF’, where an attacking site tricks a user’s browser into logging into a site with someone else’s credentials, is also covered.

The first defense against CSRF attacks is to ensure that GET requests (and other ‘safe’ methods, as defined by RFC 7231#section-4.2.1) are side effect free. Requests via ‘unsafe’ methods, such as POST, PUT, and DELETE, can then be protected by following the steps below.

How to use it

To take advantage of CSRF protection in your views, follow these steps:

1. The CSRF middleware is activated by default in the MIDDLEWARE setting. If you override that setting, remember that 'django.middleware.csrf.CsrfViewMiddleware' should come before any view middleware that assume that CSRF attacks have been dealt with.

   If you disabled it, which is not recommended, you can use csrf_protect() on particular views you want to protect (see below).

2. In any template that uses a POST form, use the csrf_token tag inside the <form> element if the form is for an internal URL, e.g.:

   <form method="post">{% csrf_token %}

   This should not be done for POST forms that target external URLs, since that would cause the CSRF token to be leaked, leading to a vulnerability.

3. In the corresponding view functions, ensure that RequestContext is used to render the response so that {% csrf_token %} will work properly. If you’re using the render() function, generic views, or contrib apps, you are covered already since these all use RequestContext.

AJAX

While the above method can be used for AJAX POST requests, it has some inconveniences: you have to remember to pass the CSRF token in as POST data with every POST request. For this reason, there is an alternative method: on each XMLHttpRequest, set a custom X-CSRFToken header (as specified by the CSRF_HEADER_NAME setting) to the value of the CSRF token. This is often easier because many JavaScript frameworks provide hooks that allow headers to be set on every request.

First, you must get the CSRF token. How to do that depends on whether or not the CSRF_USE_SESSIONS and CSRF_COOKIE_HTTPONLY settings are enabled.

Acquiring the token if CSRF_USE_SESSIONS and CSRF_COOKIE_HTTPONLY are False

The recommended source for the token is the csrftoken cookie, which will be set if you’ve enabled CSRF protection for your views as outlined above.

The CSRF token cookie is named csrftoken by default, but you can control the cookie name via the CSRF_COOKIE_NAME setting.

You can acquire the token like this:

function getCookie(name) {
    let cookieValue = null;
    if (document.cookie && document.cookie !== '') {
        const cookies = document.cookie.split(';');
        for (let i = 0; i < cookies.length; i++) {
            const cookie = cookies[i].trim();
            // Does this cookie string begin with the name we want?
            if (cookie.substring(0, name.length + 1) === (name + '=')) {
                cookieValue = decodeURIComponent(cookie.substring(name.length + 1));
                break;
            }
        }
    }
    return cookieValue;
}
const csrftoken = getCookie('csrftoken');

The above code could be simplified by using the JavaScript Cookie library to replace getCookie:

const csrftoken = Cookies.get('csrftoken');

注解

The CSRF token is also present in the DOM, but only if explicitly included using csrf_token in a template. The cookie contains the canonical token; the CsrfViewMiddleware will prefer the cookie to the token in the DOM. Regardless, you’re guaranteed to have the cookie if the token is present in the DOM, so you should use the cookie!

警告

If your view is not rendering a template containing the csrf_token template tag, Django might not set the CSRF token cookie. This is common in cases where forms are dynamically added to the page. To address this case, Django provides a view decorator which forces setting of the cookie: ensure_csrf_cookie().

Acquiring the token if CSRF_USE_SESSIONS or CSRF_COOKIE_HTTPONLY is True

If you activate CSRF_USE_SESSIONS or CSRF_COOKIE_HTTPONLY, you must include the CSRF token in your HTML and read the token from the DOM with JavaScript:

{% csrf_token %}
<script type="text/javascript">
// using jQuery
const csrftoken = jQuery("[name=csrfmiddlewaretoken]").val();
</script>

Setting the token on the AJAX request

Finally, you’ll have to actually set the header on your AJAX request, while protecting the CSRF token from being sent to other domains using settings.crossDomain in jQuery 1.5.1 and newer:

function csrfSafeMethod(method) {
    // these HTTP methods do not require CSRF protection
    return (/^(GET|HEAD|OPTIONS|TRACE)$/.test(method));
}
$.ajaxSetup({
    beforeSend: function(xhr, settings) {
        if (!csrfSafeMethod(settings.type) && !this.crossDomain) {
            xhr.setRequestHeader("X-CSRFToken", csrftoken);
        }
    }
});

If you’re using AngularJS 1.1.3 and newer, it’s sufficient to configure the $http provider with the cookie and header names:

$httpProvider.defaults.xsrfCookieName = 'csrftoken';
$httpProvider.defaults.xsrfHeaderName = 'X-CSRFToken';

Using CSRF in Jinja2 templates

Django’s Jinja2 template backend adds {{ csrf_input }} to the context of all templates which is equivalent to {% csrf_token %} in the Django template language. For example:

<form method="post">{{ csrf_input }}

The decorator method

Rather than adding CsrfViewMiddleware as a blanket protection, you can use the csrf_protect decorator, which has exactly the same functionality, on particular views that need the protection. It must be used both on views that insert the CSRF token in the output, and on those that accept the POST form data. (These are often the same view function, but not always).

Use of the decorator by itself is not recommended, since if you forget to use it, you will have a security hole. The ‘belt and braces’ strategy of using both is fine, and will incur minimal overhead.

csrf_protect(view)

Decorator that provides the protection of CsrfViewMiddleware to a view.

Usage:

from django.shortcuts import render
from django.views.decorators.csrf import csrf_protect
@csrf_protect
def my_view(request):
    c = {}
    # ...
    return render(request, "a_template.html", c)

If you are using class-based views, you can refer to Decorating class-based views.

Rejected requests

By default, a ‘403 Forbidden’ response is sent to the user if an incoming request fails the checks performed by CsrfViewMiddleware. This should usually only be seen when there is a genuine Cross Site Request Forgery, or when, due to a programming error, the CSRF token has not been included with a POST form.

The error page, however, is not very friendly, so you may want to provide your own view for handling this condition. To do this, set the CSRF_FAILURE_VIEW setting.

CSRF failures are logged as warnings to the django.security.csrf logger.

How it works

The CSRF protection is based on the following things:

1. A CSRF cookie that is based on a random secret value, which other sites will not have access to.

   This cookie is set by CsrfViewMiddleware. It is sent with every response that has called django.middleware.csrf.get_token() (the function used internally to retrieve the CSRF token), if it wasn’t already set on the request.

   In order to protect against BREACH attacks, the token is not simply the secret; a random salt is prepended to the secret and used to scramble it.

   For security reasons, the value of the secret is changed each time a user logs in.

2. A hidden form field with the name ‘csrfmiddlewaretoken’ present in all outgoing POST forms. The value of this field is, again, the value of the secret, with a salt which is both added to it and used to scramble it. The salt is regenerated on every call to get_token() so that the form field value is changed in every such response.

   This part is done by the template tag.

3. For all incoming requests that are not using HTTP GET, HEAD, OPTIONS or TRACE, a CSRF cookie must be present, and the ‘csrfmiddlewaretoken’ field must be present and correct. If it isn’t, the user will get a 403 error.

   When validating the ‘csrfmiddlewaretoken’ field value, only the secret, not the full token, is compared with the secret in the cookie value. This allows the use of ever-changing tokens. While each request may use its own token, the secret remains common to all.

   This check is done by CsrfViewMiddleware.

4. In addition, for HTTPS requests, strict referer checking is done by CsrfViewMiddleware. This means that even if a subdomain can set or modify cookies on your domain, it can’t force a user to post to your application since that request won’t come from your own exact domain.

   This also addresses a man-in-the-middle attack that’s possible under HTTPS when using a session independent secret, due to the fact that HTTP Set-Cookie headers are (unfortunately) accepted by clients even when they are talking to a site under HTTPS. (Referer checking is not done for HTTP requests because the presence of the Referer header isn’t reliable enough under HTTP.)

   If the CSRF_COOKIE_DOMAIN setting is set, the referer is compared against it. This setting supports subdomains. For example, CSRF_COOKIE_DOMAIN = '.example.com' will allow POST requests from www.example.com and api.example.com. If the setting is not set, then the referer must match the HTTP Host header.

   Expanding the accepted referers beyond the current host or cookie domain can be done with the CSRF_TRUSTED_ORIGINS setting.

This ensures that only forms that have originated from trusted domains can be used to POST data back.

It deliberately ignores GET requests (and other requests that are defined as ‘safe’ by RFC 7231#section-4.2.1). These requests ought never to have any potentially dangerous side effects, and so a CSRF attack with a GET request ought to be harmless. RFC 7231#section-4.2.1 defines POST, PUT, and DELETE as ‘unsafe’, and all other methods are also assumed to be unsafe, for maximum protection.

The CSRF protection cannot protect against man-in-the-middle attacks, so use HTTPS with HTTP Strict Transport Security. It also assumes validation of the HOST header and that there aren’t any cross-site scripting vulnerabilities on your site (because XSS vulnerabilities already let an attacker do anything a CSRF vulnerability allows and much worse).

Removing the Referer header

To avoid disclosing the referrer URL to third-party sites, you might want to disable the referer on your site’s <a> tags. For example, you might use the <meta name="referrer" content="no-referrer"> tag or include the Referrer-Policy: no-referrer header. Due to the CSRF protection’s strict referer checking on HTTPS requests, those techniques cause a CSRF failure on requests with ‘unsafe’ methods. Instead, use alternatives like <a rel="noreferrer" ...>" for links to third-party sites.

缓存

If the csrf_token template tag is used by a template (or the get_token function is called some other way), CsrfViewMiddleware will add a cookie and a Vary: Cookie header to the response. This means that the middleware will play well with the cache middleware if it is used as instructed (UpdateCacheMiddleware goes before all other middleware).

However, if you use cache decorators on individual views, the CSRF middleware will not yet have been able to set the Vary header or the CSRF cookie, and the response will be cached without either one. In this case, on any views that will require a CSRF token to be inserted you should use the django.views.decorators.csrf.csrf_protect() decorator first:

from django.views.decorators.cache import cache_page
from django.views.decorators.csrf import csrf_protect
@cache_page(60 * 15)
@csrf_protect
def my_view(request):
    ...

If you are using class-based views, you can refer to Decorating class-based views.

测试中

The CsrfViewMiddleware will usually be a big hindrance to testing view functions, due to the need for the CSRF token which must be sent with every POST request. For this reason, Django’s HTTP client for tests has been modified to set a flag on requests which relaxes the middleware and the csrf_protect decorator so that they no longer rejects requests. In every other respect (e.g. sending cookies etc.), they behave the same.

If, for some reason, you want the test client to perform CSRF checks, you can create an instance of the test client that enforces CSRF checks:

>>> from django.test import Client
>>> csrf_client = Client(enforce_csrf_checks=True)

Limitations

Subdomains within a site will be able to set cookies on the client for the whole domain. By setting the cookie and using a corresponding token, subdomains will be able to circumvent the CSRF protection. The only way to avoid this is to ensure that subdomains are controlled by trusted users (or, are at least unable to set cookies). Note that even without CSRF, there are other vulnerabilities, such as session fixation, that make giving subdomains to untrusted parties a bad idea, and these vulnerabilities cannot easily be fixed with current browsers.

Edge cases

Certain views can have unusual requirements that mean they don’t fit the normal pattern envisaged here. A number of utilities can be useful in these situations. The scenarios they might be needed in are described in the following section.

Utilities

The examples below assume you are using function-based views. If you are working with class-based views, you can refer to Decorating class-based views.

csrf_exempt(view)

This decorator marks a view as being exempt from the protection ensured by the middleware. Example:

from django.http import HttpResponse
from django.views.decorators.csrf import csrf_exempt
@csrf_exempt
def my_view(request):
    return HttpResponse('Hello world')

requires_csrf_token(view)

Normally the csrf_token template tag will not work if CsrfViewMiddleware.process_view or an equivalent like csrf_protect has not run. The view decorator requires_csrf_token can be used to ensure the template tag does work. This decorator works similarly to csrf_protect, but never rejects an incoming request.

举例:

from django.shortcuts import render
from django.views.decorators.csrf import requires_csrf_token
@requires_csrf_token
def my_view(request):
    c = {}
    # ...
    return render(request, "a_template.html", c)

ensure_csrf_cookie(view)

This decorator forces a view to send the CSRF cookie.

Scenarios

CSRF protection should be disabled for just a few views

Most views requires CSRF protection, but a few do not.

Solution: rather than disabling the middleware and applying csrf_protect to all the views that need it, enable the middleware and use csrf_exempt().

CsrfViewMiddleware.process_view not used

There are cases when CsrfViewMiddleware.process_view may not have run before your view is run - 404 and 500 handlers, for example - but you still need the CSRF token in a form.

Solution: use requires_csrf_token()

Unprotected view needs the CSRF token

There may be some views that are unprotected and have been exempted by csrf_exempt, but still need to include the CSRF token.

Solution: use csrf_exempt() followed by requires_csrf_token(). (i.e. requires_csrf_token should be the innermost decorator).

View needs protection for one path

A view needs CSRF protection under one set of conditions only, and mustn’t have it for the rest of the time.

Solution: use csrf_exempt() for the whole view function, and csrf_protect() for the path within it that needs protection. Example:

from django.views.decorators.csrf import csrf_exempt, csrf_protect
@csrf_exempt
def my_view(request):
    @csrf_protect
    def protected_path(request):
        do_something()
    if some_condition():
       return protected_path(request)
    else:
       do_something_else()

Page uses AJAX without any HTML form

A page makes a POST request via AJAX, and the page does not have an HTML form with a csrf_token that would cause the required CSRF cookie to be sent.

Solution: use ensure_csrf_cookie() on the view that sends the page.

Contrib and reusable apps

Because it is possible for the developer to turn off the CsrfViewMiddleware, all relevant views in contrib apps use the csrf_protect decorator to ensure the security of these applications against CSRF. It is recommended that the developers of other reusable apps that want the same guarantees also use the csrf_protect decorator on their views.

配置

A number of settings can be used to control Django’s CSRF behavior:

• CSRF_COOKIE_AGE
• CSRF_COOKIE_DOMAIN
• CSRF_COOKIE_HTTPONLY
• CSRF_COOKIE_NAME
• CSRF_COOKIE_PATH
• CSRF_COOKIE_SAMESITE
• CSRF_COOKIE_SECURE
• CSRF_FAILURE_VIEW
• CSRF_HEADER_NAME
• CSRF_TRUSTED_ORIGINS
• CSRF_USE_SESSIONS

Frequently Asked Questions

Is posting an arbitrary CSRF token pair (cookie and POST data) a vulnerability?

No, this is by design. Without a man-in-the-middle attack, there is no way for an attacker to send a CSRF token cookie to a victim’s browser, so a successful attack would need to obtain the victim’s browser’s cookie via XSS or similar, in which case an attacker usually doesn’t need CSRF attacks.

Some security audit tools flag this as a problem but as mentioned before, an attacker cannot steal a user’s browser’s CSRF cookie. “Stealing” or modifying your own token using Firebug, Chrome dev tools, etc. isn’t a vulnerability.

Is it a problem that Django’s CSRF protection isn’t linked to a session by default?

No, this is by design. Not linking CSRF protection to a session allows using the protection on sites such as a pastebin that allow submissions from anonymous users which don’t have a session.

If you wish to store the CSRF token in the user’s session, use the CSRF_USE_SESSIONS setting.

Why might a user encounter a CSRF validation failure after logging in?

For security reasons, CSRF tokens are rotated each time a user logs in. Any page with a form generated before a login will have an old, invalid CSRF token and need to be reloaded. This might happen if a user uses the back button after a login or if they log in a different browser tab.