AWS SNS/SQS

Detailed documentation on the AWS SNS/SQS pubsub component

Component format

To set up AWS SNS/SQS pub/sub, create a component of type pubsub.aws.snssqs.

By default, the AWS SNS/SQS component:

• Generates the SNS topics
• Provisions the SQS queues
• Configures a subscription of the queues to the topics

Note

If you only have a publisher and no subscriber, only the SNS topics are created.

However, if you have a subscriber, SNS, SQS, and the dynamic or static subscription thereof are generated.

apiVersion: dapr.io/v1alpha1
kind: Component
metadata:
  name: snssqs-pubsub
spec:
  type: pubsub.aws.snssqs
  version: v1
  metadata:
    - name: accessKey
      value: "AKIAIOSFODNN7EXAMPLE"
    - name: secretKey
      value: "wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY"
    - name: region
      value: "us-east-1"
    # - name: consumerID # Optional. If not supplied, runtime will create one.
    #   value: "channel1"
    # - name: endpoint # Optional. 
    #   value: "http://localhost:4566"
    # - name: sessionToken  # Optional (mandatory if using AssignedRole; for example, temporary accessKey and secretKey)
    #   value: "TOKEN"
    # - name: messageVisibilityTimeout # Optional
    #   value: 10
    # - name: messageRetryLimit # Optional
    #   value: 10
    # - name: messageReceiveLimit # Optional
    #   value: 10
    # - name: sqsDeadLettersQueueName # Optional
    # - value: "myapp-dlq"
    # - name: messageWaitTimeSeconds # Optional
    #   value: 1
    # - name: messageMaxNumber # Optional
    #   value: 10
    # - name: fifo # Optional
    #   value: "true"
    # - name: fifoMessageGroupID # Optional
    #   value: "app1-mgi"
    # - name: disableEntityManagement # Optional
    #   value: "false"
    # - name: disableDeleteOnRetryLimit # Optional
    #   value: "false"
    # - name: assetsManagementTimeoutSeconds # Optional
    #   value: 5
    # - name: concurrencyMode # Optional
    #   value: "single"

Warning

The above example uses secrets as plain strings. It is recommended to use a secret store for the secrets.

Spec metadata fields

Additional info

Conforming with AWS specifications

Dapr created SNS topic and SQS queue names conform with AWS specifications. By default, Dapr creates an SQS queue name based on the consumer app-id, therefore Dapr might perform name standardization to meet with AWS specifications.

SNS/SQS component behavior

When the pub/sub SNS/SQS component provisions SNS topics, the SQS queues and the subscription behave differently in situations where the component is operating on behalf of a message producer (with no subscriber app deployed), than in situations where a subscriber app is present (with no publisher deployed).

Due to how SNS works without SQS subscription in publisher only setup, the SQS queues and the subscription behave as a “classic” pub/sub system that relies on subscribers listening to topic messages. Without those subscribers, messages:

• Cannot be passed onwards and are effectively dropped
• Are not available for future subscribers (no replay of message when the subscriber finally subscribes)

SQS FIFO

Using SQS FIFO (fifo metadata field set to "true") per AWS specifications provides message ordering and deduplication, but incurs a lower SQS processing throughput, among other caveats.

Specifying fifoMessageGroupID limits the number of concurrent consumers of the FIFO queue used to only one but guarantees global ordering of messages published by the app’s Dapr sidecars. See this AWS blog post to better understand the topic of Message Group IDs and FIFO queues.

To avoid losing the order of messages delivered to consumers, the FIFO configuration for the SQS Component requires the concurrencyMode metadata field set to "single".

Default parallel concurrencyMode

Since v1.8.0, the component supports the "parallel" concurrencyMode as its default mode. In prior versions, the component default behavior was calling the subscriber a single message at a time and waiting for its response.

SQS dead-letter Queues

When configuring the PubSub component with SQS dead-letter queues, the metadata fields messageReceiveLimit and sqsDeadLettersQueueName must both be set to a value. For messageReceiveLimit, the value must be greater than 0 and the sqsDeadLettersQueueName must not be empty string.

Important

When running the Dapr sidecar (daprd) with your application on EKS (AWS Kubernetes) node/pod already attached to an IAM policy defining access to AWS resources, you must not provide AWS access-key, secret-key, and tokens in the definition of the component spec.

Create an SNS/SQS instance

• Self-Hosted
• Kubernetes
• AWS

For local development, the localstack project is used to integrate AWS SNS/SQS. Follow these instructions to run localstack.

To run localstack locally from the command line using Docker, apply the following cmd:

docker run --rm -it -p 4566:4566 -p 4571:4571 -e SERVICES="sts,sns,sqs" -e AWS_DEFAULT_REGION="us-east-1" localstack/localstack

In order to use localstack with your pub/sub binding, you need to provide the endpoint configuration in the component metadata. The endpoint is unnecessary when running against production AWS.

See Authenticating to AWS for information about authentication-related attributes.

apiVersion: dapr.io/v1alpha1
kind: Component
metadata:
  name: snssqs-pubsub
spec:
  type: pubsub.aws.snssqs
  version: v1
  metadata:
    - name: accessKey
      value: "anyString"
    - name: secretKey
      value: "anyString"
    - name: endpoint
      value: http://localhost:4566
    # Use us-east-1 or any other region if provided to localstack as defined by "AWS_DEFAULT_REGION" envvar
    - name: region
      value: us-east-1

To run localstack on Kubernetes, you can apply the configuration below. Localstack is then reachable at the DNS name http://localstack.default.svc.cluster.local:4566 (assuming this was applied to the default namespace), which should be used as the endpoint.

apiVersion: apps/v1
kind: Deployment
metadata:
  name: localstack
spec:
  # using the selector, we will expose the running deployments
  # this is how Kubernetes knows, that a given service belongs to a deployment
  selector:
    matchLabels:
      app: localstack
  replicas: 1
  template:
    metadata:
      labels:
        app: localstack
    spec:
      containers:
      - name: localstack
        image: localstack/localstack:latest
        ports:
          # Expose the edge endpoint
          - containerPort: 4566
---
kind: Service
apiVersion: v1
metadata:
  name: localstack
  labels:
    app: localstack
spec:
  selector:
    app: localstack
  ports:
  - protocol: TCP
    port: 4566
    targetPort: 4566
  type: LoadBalancer

In order to run in AWS, create or assign an IAM user with permissions to the SNS and SQS services, with a policy like:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Sid": "YOUR_POLICY_NAME",
      "Effect": "Allow",
      "Action": [
        "sns:CreateTopic",
        "sns:GetTopicAttributes",
        "sns:ListSubscriptionsByTopic",
        "sns:Publish",
        "sns:Subscribe",
        "sns:TagResource",
        "sqs:ChangeMessageVisibility",
        "sqs:CreateQueue",
        "sqs:DeleteMessage",
        "sqs:GetQueueAttributes",
        "sqs:GetQueueUrl",
        "sqs:ReceiveMessage",
        "sqs:SetQueueAttributes",
        "sqs:TagQueue"
      ],
      "Resource": [
        "arn:aws:sns:AWS_REGION:AWS_ACCOUNT_ID:*",
        "arn:aws:sqs:AWS_REGION:AWS_ACCOUNT_ID:*"
      ]
    }
  ]
}

Plug the AWS account ID and AWS account secret into the accessKey and secretKey in the component metadata, using Kubernetes secrets and secretKeyRef.

Alternatively, let’s say you want to provision the SNS and SQS assets using your own tool of choice (for example, Terraform) while preventing Dapr from doing so dynamically. You need to enable disableEntityManagement and assign your Dapr-using application with an IAM Role, with a policy like:

{
  "Version": "2012-10-17",
  "Statement": [
    {
      "Sid": "YOUR_POLICY_NAME",
      "Effect": "Allow",
      "Action": [
        "sqs:DeleteMessage",
        "sqs:ReceiveMessage",
        "sqs:ChangeMessageVisibility",
        "sqs:GetQueueUrl",
        "sqs:GetQueueAttributes",
        "sns:Publish",
        "sns:ListSubscriptionsByTopic",
        "sns:GetTopicAttributes"
      ],
      "Resource": [
        "arn:aws:sns:AWS_REGION:AWS_ACCOUNT_ID:APP_TOPIC_NAME",
        "arn:aws:sqs:AWS_REGION:AWS_ACCOUNT_ID:APP_ID"
      ]
    }
  ]
}

In the above example, you are running your applications on an EKS cluster with dynamic assets creation (the default Dapr behavior).

Related links

• Basic schema for a Dapr component
• Pub/Sub building block overview and how-to guides
• Authenticating to AWS
• AWS docs:
  • AWS SQS as subscriber to SNS
  • AWS SNS API reference
  • AWS SQS API reference

Last modified October 12, 2023: Update config.toml (#3826) (0ffc2e7)