Types

C/C++ compilers implement a data model that affects what width the standard types are. The general rule is that:

1 == sizeof(char) <= sizeof(short) <= sizeof(int) <= sizeof(long) <= sizeof(long long)

As you can see, potentially everything all the way to long long could be a single byte, or there could be some other crazy definition. In practice however, data models come in four common types which will be covered in the next section.

For this section, we’ll cover the most likely analogous types between Rust and C/C++.

[^1] Rust’s char type, is 4 bytes wide, enough to hold any Unicode character. This is equivalent to the belated char32_t that appears in C++11 to rectify the abused C++98 wchar_t type which on operating systems such as Windows is only 2 bytes wide. When you iterate strings in Rust you may do so either by character or u8, i.e. a byte.

[^2] See the next section to for a discussion on data models.

[^3] Rust has a specific numeric type for indexing on arrays and collections called usize. A usize is designed to be able to reference as many elements in an array as there is addressable memory. i.e. if memory is 64-bit addressable then usize is 64-bits in length. There is also a signed isize which is less used but also available.

Data model

The four common data models in C++ are:

• LP32 - int is 16-bit, long and pointers are 32-bit. This is an uncommon model, a throw-back to DOS / Windows 3.1
• ILP32 - int, long and pointers are 32-bit. Used by Win32, Linux, OS X
• LLP64 - int and long are 32-bit, long long and pointers are 64-bit. Used by Win64
• LP64 - int is 32-bit, long / long long and pointers are 64-bit. Used by Linux, OS X

C/C++ types compared to Rust

C/C++ and Rust will share the same machine types for each corresponding language type and the same compiler / backend technology, i.e.:

1. Signed types are two’s complement
2. IEE 754-2008 binary32 and binary64 floating points for float and double precision types.

stdint.h / cstdint

C provides a <stdint.h> header that provides unambigious typedefs with length and signedess, e.g. uint32_t. The equivalent in C++ is <cstdlib>.

If you use the types defined in this header file the types become directly analogous and unambiguous between C/C++ and Rust.

Integer types

C++

C/C++ has primitive types for numeric values, floating point values and booleans. Strings will be dealt in a separate section.

Integer types (char, short, int, long) come in signed and unsigned versions.

A char is always 8-bits, but for historical reasons, the standards only guarantee the other types are “at least” a certain number of bits. So an int is ordinarily 32-bits but the standard only say it should be at least as large as a short, so potentially it could be 16-bits!

More recent versions of C and C++ provide a <cstdint> (or <stdint.h> for C) with typedefs that are unambiguous about their precision.

Even though <stdint.h> can clear up the ambiguities, code frequently sacrifices correctness for terseness. It is not unusual to see an int used as a temporary incremental value in a loop:

string s = read_file();
for (int i = 0; i < s.size(); ++i) {
  //...
}

While int is unlikely to fail for most loops in a modern compiler supporting ILP32 or greater, it is still technically wrong. In a LP32 data model incrementing 32767 by one would become -32768 so this loop would never terminate if s.size() was a value greater than that.

But look again at this snippet. What if the file read by read_file() is outside of our control. What if someone deliberately or accidentally feeds us a file so large that our loop will fail trying to iterate over it? In doing so our code is hopelessly broken.

This loop should be using the same type returned from string::size() which is an opaque unsigned integer type called size_type. This is usually a typedef for std::size_t but not necessarily. Thus we have a type mismatch. A string has an iterator which could be used instead but perhaps you need the index for some reason, but it can messy:

string s = read_file();
for (string::iterator i = s.begin(); i != s.end(); ++i) {
  string::difference_type idx = std::distance(s.begin(), i);
  //...
}

Now we’ve swapped from one opaque type size_type to another called difference_type. Ugh.

C/C++ types can also be needlessly wordy such as unsigned long long int. Again, this sort of puffery encourages code to make bad assumptions, use a less wordy type, or bloat the code with typedefs.

Rust

Rust benefits from integer types that unambiguously denote their signedness and width in their name - i16, u8 etc.

They are also extremely terse making it easy to declare and use them. For example a u32 is an unsigned 32-bit integer. An i64 is a signed 64-bit integer.

Types may be inferred or explicitly prefixed to the value:

let v1 = 1000;
let v2 : u32 = 25;
let v3 = 126i8;

Rust also has two types called usize and isize respectively. These are equivalent to size_t in that they are as large enough to hold as many elements as there is addressable memory. So in a 32-bit operating system they will be 32-bits in size, in a 64-bit operating system they will be 64-bits in size.

Rust will not implicitly coerce an integer from one size to another without explicit use of the as keyword.

let v1 = 1000u32;
let v2: u16 = v1 as u16;

Real types

C++

C/C++ has float, double and long double precision floating point types and they suffer the same vagueness as integer types.

• float
• double - “at least as much precision as a float“
• long double - “at least as much precision as a double“

In most compilers and architectures however a float is a 32-bit single precision value, and a double is an 64-bit double precision value. The most common machine representation is the IEEE 754-2008 format.

Long double

The long double has proven quite problematic for compilers. Despite expectations that it is a quadruple precision value it usually isn’t. Some compilers such as gcc may offer 80-bit extended precision on x86 processors with a floating point unit but it is implementation defined behaviour.

The Microsoft Visual C++ compiler treats it with the same precision as a double. Other architectures may treat it as quadruple precision. The fundamental problem with long double is that most desktop processors do not have the ability in hardware to perform 128-bit floating point operations so a compiler must either implement it in software or not bother.

Math functions

The <math.h> C header provides math functions for working with different precision types.

#include <math.h>
const double PI = 3.1415927;
double result = cos(45.0 * PI / 180.0);
//..
double result2 = abs(-124.77);
//..
float result3 = sqrtf(9.0f);
//
long double result4 = powl(9,10);

Note how different calls are required according to the precision, e.g. sinf, sin or sinl. C99 supplies a “type-generic” set of macros in <tgmath.h> which allows sin to be used regardless of type.

C++11 provides a <cmath> that uses specialised inline functions for the same purpose:

#include <cmath>
float result = std::sqrt(9.0f);

Rust

Rust implements two floating point types - f32 and f64. These would be analogous to a 32-bit float and 64-bit double in C/C++.

let v1 = 10.0;
let v2 = 99.99f32;
let v3 = -10e4f64;

Unlike in C/C++, the math functions are directly bound to the type itself providing you properly qualify the type.

let result = 10.0f32.sqrt();
//
let degrees = 45.0f64;
let result2 = angle.to_radians().cos();

Rust does not have a 128-bit double. A f128 did exist for a period of time but was removed to portability, complexity and maintenance issues. Note how long double is treated (or not) according to the compiler and target platform.

At some point Rust might get a f128 or f80 but at this time does not have such a type.

Booleans

A bool (boolean) type in C/C++ can have the value true or false, however it can be promoted to an integer type (0 == false, 1 == true) and a bool even has a ++ operator for turning false to true although it has no — operator!?

But inverting true with a ! becomes false and vice versa.

!false == true
!true == false

Rust also has a bool type that can have the value true or false. Unlike C/C++ it is a true type with no promotion to integer type

void / Unit type

C/C++ uses void to specify a type of nothing or an indeterminate pointer to something.

// A function that doesn't return anything
void delete_directory(const std::string &path);
// Indeterminate pointer use
struct file_stat {
  uint32_t creation_date;
  uint32_t last_modified;
  char file_name[MAX_PATH + 1];
};
// malloc returns a void * which must be cast to the type need
file_stat *s = (file_stat *) malloc(sizeof(file_stat));
// But casting is not required when going back to void *
free(s);

The nearest thing to void in Rust is the Unit type. It’s called a Unit type because it’s type is () and it has one value of ().

Technically void is absolutely nothing and () is a single value of type () so they’re not analogous but they serve a similar purpose.

When a block evaluates to nothing it returns (). We can also use it in places where we don’t care about one parameter. e.g. say we have a function do_action() that succeeds or fails for various reasons. We don’t need any payload with the Ok response so specify () as the payload of success:

fn do_action() -> Result<(), String> {
 //...
 Result::Ok(())
}
let result = do_action();
if result.is_ok() {
 println!("Success!");
}

Empty enums

Rust does have something closer (but not the same as) void - empty enumerations.

enum Void {}

Essentially this enum has no values at all so anything that assigns or matches this nothing-ness is unreachable and the compiler can issue warnings or errors. If the code had used () the compiler might not be able to determine this.

Tuples

A tuple is a collection of values of the same or different type passed to a function or returned by one as if it were a single value.

C/C++ has no concept of a tuple primitive type, however C++11 can construct a tuple using a template:

std::tuple<std::string, int> v1 = std::make_tuple("Sally", 25);
//
std::cout << "Name = " << std::get<0>(v1)
          << ", age = " << std::get<1>(v1) << std::endl;

Rust supports tuples as part of its language:

let v1 = ("Sally", 25);
println!("Name = {}, age = {}", v1.0, v1.1);

As you can see this is more terse and more useful. Note that the way a tuple is indexed is different from an array though, values are indexed via .0, .1 etc.

Tuples can also be returned by functions and assignment operators can ignore tuple members we’re not interested in.

let (x, y, _) = calculate_coords();
println!("x = {}, y = {}", x, y);
//...
pub fn calculate_coords() -> (i16, i16, i16) {
  (11, 200, -33)
}

In this example, the calculate_coords() function returns a tuple containing three i16 values. We assign the first two values to x and y respectively and ignore the third by passing an underscore. The underscore tells the compiler we’re aware of the 3rd value but we just don’t care about it.

Tuples can be particularly useful with code blocks. For example, let’s say we want to get some values from a piece of code that uses a guard lock on a reference counted service. We can lock the service in the block and return all the values as a tuple to the recipients outside of the block:

let protected_service: Arc<Mutex<ProtectedService>> = Arc::new(Mutex::new(ProtectedService::new()));
//...
let (host, port, url) = {
  // Lock and acquire access to ProtectedService
  let protected_service = protected_service.lock().unwrap();
  let host = protected_service.host();
  let port = protected_service.port();
  let url = protected_service.url();
  (host, port, url)
}

This code is really neat - the lock allows us to obtain the values, the lock goes out of scope and the values are returned in one go.

Arrays

An array is a fixed size list of elements allocated either on the stack or the heap.

E.g to create a 100 element array of double values in C++:

// Stack
double values[100];
// Heap
double *values = new double[100];
delete []values;
// C99 style brace enclosed lists
double values[100] = {0}; // Set all to 0
double values[100] = {1, 2, 3}; // 1,2,3,0,0,0,0...
// C99 with designator
double values[100] = {1, 2, 3, [99] 99}; // 1,2,3,0,0,0,...,0,99

And in Rust:

// Stack
let mut values = [0f64; 100]; // 100 elements 
let mut values = [1f64, 2f64, 3f64]; // 3 elements 1,2,3
// Heap
let mut values = Box::new([0f64; 100]);

Note how Rust provides a shorthand to initialise the array with the same value or assigns the array with every value. Initialisation in C and C++ is optional however it is more expressive in that portions of the array can be set or not set using enclosed list syntax.

Rust actually forces you to initialise an array to something. Attempting to declare an array without assigning it a value is a compiler error.

Slices

A slice is a runtime view of a part of an array or string. A slice is not a copy of the array / string rather that it is a reference to a portion of it. The reference holds a pointer to the starting element and the number of elements in the slice.

let array = ["Mary", "Sue", "Bob", "Michael"];
println!("{:?}", array);
let slice = &array[2..];
println!("{:?}", slice);

This slice represents the portion of array starting from index 2.

["Mary", "Sue", "Bob", "Michael"]
["Bob", "Michael"]

Size of the array

C and C++ basically give no easy way to know the length of the array unless you encapsulate the array with a std::array or happen to remember it from the code that declares it.

// C++11
std::array<Element, 100> elements;
std::cout << "Size of array = " << elements.size() << std::endl;

The std::array wrapper is of limited use because you cannot pass arrays of an unknown size to a function. Therefore even with this template you may pass the array into a function as one argument and its size as another.

Alternatively you might see code like this:

const size_t num_elements = 1024;
char buffer[num_elements];
//...
// fill_buffer needs to be told how many elements there are
fill_buffer(buffer, num_elements);

Or like this

Element elements[100];
//...
int num_elements = sizeof(elements) / sizeof(Element);

In Rust, the array has a function bound to it called len(). This always provides the length of the array. In addition if we take a slice of the array, that also has a len().

let buffer: [u8; 1024]
println!("Buffer length = {}", buffer.len());
fill_buffer(&buffer[0..10]);
//...
fn fill_buffer(elements: &[Element]) {
  println!("Number of elements = {}", elements.len());
}