Installation using kubeadm

This guide describes deploying Cilium on a Kubernetes cluster created with kubeadm.

For installing kubeadm on your system, please refer to the official kubeadm documentation The official documentation also describes additional options of kubeadm which are not mentioned here.

If you are interested in using Cilium’s kube-proxy replacement, please follow the Kubernetes Without kube-proxy guide and skip this one.

Create the cluster

Initialize the control plane via executing on it:

  1. kubeadm init

Note

If you want to use Cilium’s kube-proxy replacement, kubeadm needs to skip the kube-proxy deployment phase, so it has to be executed with the --skip-phases=addon/kube-proxy option:

  1. kubeadm init --skip-phases=addon/kube-proxy

For more information please refer to the Kubernetes Without kube-proxy guide.

Afterwards, join worker nodes by specifying the control-plane node IP address and the token returned by kubeadm init:

  1. kubeadm join <..>

Deploy Cilium

Note

First, make sure you have Helm 3 installed. Helm 2 is no longer supported.

Setup Helm repository:

  1. helm repo add cilium https://helm.cilium.io/

Deploy Cilium release via Helm:

  1. helm install cilium cilium/cilium --version 1.9.8 --namespace kube-system

Validate the Installation

You can monitor as Cilium and all required components are being installed:

  1. kubectl -n kube-system get pods --watch
  2. NAME                                    READY   STATUS              RESTARTS   AGE
  3. cilium-operator-cb4578bc5-q52qk         0/1     Pending             0          8s
  4. cilium-s8w5m                            0/1     PodInitializing     0          7s
  5. coredns-86c58d9df4-4g7dd                0/1     ContainerCreating   0          8m57s
  6. coredns-86c58d9df4-4l6b2                0/1     ContainerCreating   0          8m57s

It may take a couple of minutes for all components to come up:

  1. cilium-operator-cb4578bc5-q52qk         1/1     Running   0          4m13s
  2. cilium-s8w5m                            1/1     Running   0          4m12s
  3. coredns-86c58d9df4-4g7dd                1/1     Running   0          13m
  4. coredns-86c58d9df4-4l6b2                1/1     Running   0          13m

Deploy the connectivity test

You can deploy the “connectivity-check” to test connectivity between pods. It is recommended to create a separate namespace for this.

  1. kubectl create ns cilium-test

Deploy the check with:

  1. kubectl apply -n cilium-test -f https://raw.githubusercontent.com/cilium/cilium/v1.9/examples/kubernetes/connectivity-check/connectivity-check.yaml

It will deploy a series of deployments which will use various connectivity paths to connect to each other. Connectivity paths include with and without service load-balancing and various network policy combinations. The pod name indicates the connectivity variant and the readiness and liveness gate indicates success or failure of the test:

  1. $ kubectl get pods -n cilium-test
  2. NAME                                                     READY   STATUS    RESTARTS   AGE
  3. echo-a-76c5d9bd76-q8d99                                  1/1     Running   0          66s
  4. echo-b-795c4b4f76-9wrrx                                  1/1     Running   0          66s
  5. echo-b-host-6b7fc94b7c-xtsff                             1/1     Running   0          66s
  6. host-to-b-multi-node-clusterip-85476cd779-bpg4b          1/1     Running   0          66s
  7. host-to-b-multi-node-headless-dc6c44cb5-8jdz8            1/1     Running   0          65s
  8. pod-to-a-79546bc469-rl2qq                                1/1     Running   0          66s
  9. pod-to-a-allowed-cnp-58b7f7fb8f-lkq7p                    1/1     Running   0          66s
  10. pod-to-a-denied-cnp-6967cb6f7f-7h9fn                     1/1     Running   0          66s
  11. pod-to-b-intra-node-nodeport-9b487cf89-6ptrt             1/1     Running   0          65s
  12. pod-to-b-multi-node-clusterip-7db5dfdcf7-jkjpw           1/1     Running   0          66s
  13. pod-to-b-multi-node-headless-7d44b85d69-mtscc            1/1     Running   0          66s
  14. pod-to-b-multi-node-nodeport-7ffc76db7c-rrw82            1/1     Running   0          65s
  15. pod-to-external-1111-d56f47579-d79dz                     1/1     Running   0          66s
  16. pod-to-external-fqdn-allow-google-cnp-78986f4bcf-btjn7   1/1     Running   0          66s

Note

If you deploy the connectivity check to a single node cluster, pods that check multi-node functionalities will remain in the Pending state. This is expected since these pods need at least 2 nodes to be scheduled successfully.

Specify Environment Variables

Specify the namespace in which Cilium is installed as CILIUM_NAMESPACE environment variable. Subsequent commands reference this environment variable.

  1. export CILIUM_NAMESPACE=kube-system

Enable Hubble for Cluster-Wide Visibility

Hubble is the component for observability in Cilium. To obtain cluster-wide visibility into your network traffic, deploy Hubble Relay and the UI as follows on your existing installation:

Installation via Helm

Installation via quick-hubble-install.yaml

If you installed Cilium via helm install, you may enable Hubble Relay and UI with the following command:

  1. helm upgrade cilium cilium/cilium --version 1.9.8 \
  2.    --namespace $CILIUM_NAMESPACE \
  3.    --reuse-values \
  4.    --set hubble.listenAddress=":4244" \
  5.    --set hubble.relay.enabled=true \
  6.    --set hubble.ui.enabled=true

On Cilium 1.9.1 and older, the Cilium agent pods will be restarted in the process.

If you installed Cilium 1.9.2 or newer via the provided quick-install.yaml, you may deploy Hubble Relay and UI on top of your existing installation with the following command:

  1. kubectl apply -f https://raw.githubusercontent.com/cilium/cilium/v1.9/install/kubernetes/quick-hubble-install.yaml

Installation via quick-hubble-install.yaml only works if the installed Cilium version is 1.9.2 or newer. Users of Cilium 1.9.0 or 1.9.1 are encouraged to upgrade to a newer version by applying the most recent Cilium quick-install.yaml first.

Alternatively, it is possible to manually generate a YAML manifest for the Cilium DaemonSet and Hubble Relay/UI as follows. The generated YAML can be applied on top of an existing installation:

  1. # Set this to your installed Cilium version
  2. export CILIUM_VERSION=1.9.1
  3. # Please set any custom Helm values you may need for Cilium,
  4. # such as for example `--set operator.replicas=1` on single-cluster nodes.
  5. helm template cilium cilium/cilium --version $CILIUM_VERSION \\
  6.    --namespace $CILIUM_NAMESPACE \\
  7.    --set hubble.tls.auto.method="cronJob" \\
  8.    --set hubble.listenAddress=":4244" \\
  9.    --set hubble.relay.enabled=true \\
  10.    --set hubble.ui.enabled=true > cilium-with-hubble.yaml
  11. # This will modify your existing Cilium DaemonSet and ConfigMap
  12. kubectl apply -f cilium-with-hubble.yaml

The Cilium agent pods will be restarted in the process.

Once the Hubble UI pod is started, use port forwarding for the hubble-ui service. This allows opening the UI locally on a browser:

  1. kubectl port-forward -n $CILIUM_NAMESPACE svc/hubble-ui --address 0.0.0.0 --address :: 12000:80

And then open http://localhost:12000/ to access the UI.

Hubble UI is not the only way to get access to Hubble data. A command line tool, the Hubble CLI, is also available. It can be installed by following the instructions below:

Linux

MacOS

Windows

Download the latest hubble release:

  1. export HUBBLE_VERSION=$(curl -s https://raw.githubusercontent.com/cilium/hubble/master/stable.txt)
  2. curl -LO "https://github.com/cilium/hubble/releases/download/$HUBBLE_VERSION/hubble-linux-amd64.tar.gz"
  3. curl -LO "https://github.com/cilium/hubble/releases/download/$HUBBLE_VERSION/hubble-linux-amd64.tar.gz.sha256sum"
  4. sha256sum --check hubble-linux-amd64.tar.gz.sha256sum
  5. tar zxf hubble-linux-amd64.tar.gz

and move the hubble CLI to a directory listed in the $PATH environment variable. For example:

  1. sudo mv hubble /usr/local/bin

Download the latest hubble release:

  1. export HUBBLE_VERSION=$(curl -s https://raw.githubusercontent.com/cilium/hubble/master/stable.txt)
  2. curl -LO "https://github.com/cilium/hubble/releases/download/$HUBBLE_VERSION/hubble-darwin-amd64.tar.gz"
  3. curl -LO "https://github.com/cilium/hubble/releases/download/$HUBBLE_VERSION/hubble-darwin-amd64.tar.gz.sha256sum"
  4. shasum -a 256 -c hubble-darwin-amd64.tar.gz.sha256sum
  5. tar zxf hubble-darwin-amd64.tar.gz

and move the hubble CLI to a directory listed in the $PATH environment variable. For example:

  1. sudo mv hubble /usr/local/bin

Download the latest hubble release:

  1. curl -LO "https://raw.githubusercontent.com/cilium/hubble/master/stable.txt"
  2. set /p HUBBLE_VERSION=<stable.txt
  3. curl -LO "https://github.com/cilium/hubble/releases/download/%HUBBLE_VERSION%/hubble-windows-amd64.tar.gz"
  4. curl -LO "https://github.com/cilium/hubble/releases/download/%HUBBLE_VERSION%/hubble-windows-amd64.tar.gz.sha256sum"
  5. certutil -hashfile hubble-windows-amd64.tar.gz SHA256
  6. type hubble-windows-amd64.tar.gz.sha256sum
  7. :: verify that the checksum from the two commands above match
  8. tar zxf hubble-windows-amd64.tar.gz

and move the hubble.exe CLI to a directory listed in the %PATH% environment variable after extracting it from the tarball.

Similarly to the UI, use port forwarding for the hubble-relay service to make it available locally:

  1. kubectl port-forward -n $CILIUM_NAMESPACE svc/hubble-relay --address 0.0.0.0 --address :: 4245:80

In a separate terminal window, run the hubble status command specifying the Hubble Relay address:

  1. $ hubble --server localhost:4245 status
  2. Healthcheck (via localhost:4245): Ok
  3. Current/Max Flows: 5455/16384 (33.29%)
  4. Flows/s: 11.30
  5. Connected Nodes: 4/4

If Hubble Relay reports that all nodes are connected, as in the example output above, you can now use the CLI to observe flows of the entire cluster:

  1. hubble --server localhost:4245 observe

If you encounter any problem at this point, you may seek help on Slack.

Tip

Hubble CLI configuration can be persisted using a configuration file or environment variables. This avoids having to specify options specific to a particular environment every time a command is run. Run hubble help config for more information.

For more information about Hubble and its components, see the Observability section.