Configure Introduction
- 1 TubeMQ configuration item description
- 2 Configuration item details:

Configure Introduction

1 TubeMQ configuration item description

The TubeMQ server includes two modules for the Master and the Broker. The Master also includes a Web front-end module for external page access (this part is stored in the resources). Considering the actual deployment, two modules are often deployed in the same machine, TubeMQ. The contents of the three parts of the two modules are packaged and delivered to the operation and maintenance; the client does not include the lib package of the server part and is delivered to the user separately.

Master and Broker use the ini configuration file format, and the relevant configuration files are placed in the master.ini and broker.ini files in the tubemq-server-3.9.0/conf/ directory:

Their configuration is defined by a set of configuration units. The Master configuration consists of four mandatory units: [master], [zookeeper], [bdbStore], and optional [tlsSetting]. The Broker configuration is mandatory. Broker], [zookeeper] and optional [tlsSetting] consist of a total of 3 configuration units; in actual use, you can also combine the contents of the two configuration files into one ini file.

In addition to the back-end system configuration file, the Master also stores the Web front-end page module in the resources. The root directory velocity.properties file of the resources is the Web front-end page configuration file of the Master.

2 Configuration item details:

2.1 master.ini file:

[master]

Master system runs the main configuration unit, required unit, the value is fixed to “[master]“

Name	Required	Type	Description
hostName	yes	string	The host address of the master external service, required, must be configured on the NIC, is enabled, non-loopback and cannot be IP of 127.0.0.1
port	no	int	Master listening port, optional, default is 8715
webPort	no	int	Master web console access port, the default value is 8080
webResourcePath	yes	string	Master Web Resource deploys an absolute path, which is required. If the value is set incorrectly, the web page will not display properly.
confModAuthToken	no	string	The authorization Token provided by the operator when the change operation (including adding, deleting, changing configuration, and changing the master and managed Broker status) is performed by the Master’s Web or API. The value is optional. The default is “ASDFGHJKL”.
firstBalanceDelayAfterStartMs	no	long	Master starts to the interval of the first time to start Rebalance, optional, default 30000 milliseconds
consumerBalancePeriodMs	no	long	The master balances the rebalance period of the consumer group. The default is 60000 milliseconds. When the cluster size is large, increase the value.
consumerHeartbeatTimeoutMs	no	long	Consumer heartbeat timeout period, optional, default 30000 milliseconds, when the cluster size is large, please increase the value
producerHeartbeatTimeoutMs	no	long	Producer heartbeat timeout period, optional, default 30000 milliseconds, when the cluster size is large, please increase the value
brokerHeartbeatTimeoutMs	no	long	Broker heartbeat timeout period, optional, default 30000 milliseconds, when the cluster size is large, please increase the value
rebalanceParallel	no	int	Master rebalance parallelism, optional, default 4, the value range of this field is [1, 20], when the cluster size is large, please increase the value
socketRecvBuffer	no	long	Socket receives the size of the Buffer buffer SO_RCVBUF, the unit byte, the negative number is set as the default value
socketSendBuffer	no	long	Socket sends Buffer buffer SO_SNDBUF size, unit byte, negative number is set as the default value
maxAutoForbiddenCnt	no	int	When the broker has an IO failure, the maximum number of masters allowed to automatically go offline is the number of options. The default value is 5. It is recommended that the value does not exceed 10% of the total number of brokers in the cluster.
startOffsetResetCheck	no	boolean	Whether to enable the check function of the client Offset reset function, optional, the default is false
needBrokerVisitAuth	no	boolean	Whether to enable Broker access authentication, the default is false. If true, the message reported by the broker must carry the correct username and signature information.
visitName	no	string	The username of the Broker access authentication. The default is an empty string. This value must exist when needBrokerVisitAuth is true. This value must be the same as the value of the visitName field in broker.ini.
visitPassword	no	string	The password for the Broker access authentication. The default is an empty string. This value must exist when needBrokerVisitAuth is true. This value must be the same as the value of the visitPassword field in broker.ini.
startVisitTokenCheck	no	boolean	Whether to enable client visitToken check, the default is false
startProduceAuthenticate	no	boolean	Whether to enable production end user authentication, the default is false
startProduceAuthorize	no	boolean	Whether to enable production-side production authorization authentication, the default is false
startConsumeAuthenticate	no	boolean	Whether to enable consumer user authentication, the default is false
startConsumeAuthorize	no	boolean	Whether to enable consumer consumption authorization authentication, the default is false
maxGroupBrokerConsumeRate	no	int	The maximum ratio of the number of clustered brokers to the number of members in the consumer group. The default is 50. In a 50-kerrow cluster, one consumer group is allowed to start at least one client.
metaDataPath	no	string	Metadata storage path. Absolute, or relative to TubeMQ base directory (`$BASE_DIR`). Optional field, default is “var/meta_data”. Should be the same as “[bdbStore].bdbEnvHome” if upgrade from version prior `0.5.0`.

[zookeeper]

The corresponding Tom MQ cluster of the Master stores the information about the ZooKeeper cluster of the Offset. The required unit has a fixed value of “[zookeeper]“.

Name	Required	Type	Description
zkServerAddr	no	string	Zk server address, optional configuration, defaults to “localhost:2181”
zkNodeRoot	no	string	The root path of the node on zk, optional configuration. The default is “/tube”.
zkSessionTimeoutMs	no	long	Zk heartbeat timeout, in milliseconds, default 30 seconds
zkConnectionTimeoutMs	no	long	Zk connection timeout, in milliseconds, default 30 seconds
zkSyncTimeMs	no	long	Zk data synchronization time, in milliseconds, default 5 seconds
zkCommitPeriodMs	no	long	The interval at which the Master cache data is flushed to zk, in milliseconds, default 5 seconds.

[replication]

Replication configuration for metadata storage replication and multi-node hot standby between Masters. The required unit has a fixed value of “[replication]“.

Name	Required	Type	Description
repGroupName	no	string	Cluster name, the primary and backup master node values must be the same. Optional field, default is “tubemqMasterGroup”.
repNodeName	yes	string	The name of the master node in the cluster. The value of each node MUST BE DIFFERENT. Required field.
repNodePort	no	int	Node communication port, optional field, default is 9001.
repHelperHost	no	string	Primary node when the master cluster starts, optional field, default is “127.0.0.1:9001”.
metaLocalSyncPolicy	no	int	Replication data node local storage mode, the value range of this field is [1, 2, 3]. The default is 1: 1 is data saved to disk, 2 is data only saved to memory, and 3 is only data is written to file system buffer without flush.
metaReplicaSyncPolicy	no	int	Replication data node synchronization save mode, the value range of this field is [1, 2, 3]. The default is 1: 1 is data saved to disk, 2 is data only saved to memory, and 3 is only data is written to file system buffer without flush.
repReplicaAckPolicy	no	int	The response policy of the replication node data synchronization, the value range of this field is [1, 2, 3], the default is 1: 1 is more than 1/2 majority is valid, 2 is valid for all nodes, 3 is not Need node response.
repStatusCheckTimeoutMs	no	long	Replication status check interval, optional field, in milliseconds, defaults to 10 seconds.

[bdbStore]

Deprecated, config in “[replication]“ instead.

Master configuration of the BDB cluster to which the master belongs. The master uses BDB for metadata storage and multi-node hot standby. The required unit has a fixed value of “[bdbStore]“.

Name	Required	Type	Description
bdbRepGroupName	yes	string	BDB cluster name, the primary and backup master node values must be the same, required field
bdbNodeName	yes	string	The name of the node of the master in the BDB cluster. The value of each BDB node must not be repeated. Required field.
bdbNodePort	no	int	BDB node communication port, optional field, default is 9001
bdbEnvHome	yes	string	BDB data storage path, required field
bdbHelperHost	yes	string	Primary node when the BDB cluster starts, required field
bdbLocalSync	no	int	BDB data node local storage mode, the value range of this field is [1, 2, 3]. The default is 1: 1 is data saved to disk, 2 is data only saved to memory, and 3 is only data is written to file system buffer. But not brush
bdbReplicaSync	no	int	BDB data node synchronization save mode, the value range of this field is [1, 2, 3]. The default is 1: 1 is data saved to disk, 2 is data only saved to memory, and 3 is only data is written to file system buffer. But not brush
bdbReplicaAck	no	int	The response policy of the BDB node data synchronization, the value range of this field is [1, 2, 3], the default is 1: 1 is more than 1/2 majority is valid, 2 is valid for all nodes, 3 is not Need node response
bdbStatusCheckTimeoutMs	no	long	BDB status check interval, optional field, in milliseconds, defaults to 10 seconds

[tlsSetting]

The Master uses TLS to encrypt the transport layer data. When TLS is enabled, the configuration unit provides related settings. The optional unit has a fixed value of “[tlsSetting]“.

Name	Required	Type	Description
tlsEnable	no	boolean	Whether to enable TLS function, optional configuration, default is false
tlsPort	no	int	Master TLS port number, optional configuration, default is 8716
tlsKeyStorePath	no	string	The absolute storage path of the TLS keyStore file + the name of the keyStore file. This field is required and cannot be empty when the TLS function is enabled.
tlsKeyStorePassword	no	string	The absolute storage path of the TLS keyStorePassword file + the name of the keyStorePassword file. This field is required and cannot be empty when the TLS function is enabled.
tlsTwoWayAuthEnable	no	boolean	Whether to enable TLS mutual authentication, optional configuration, the default is false
tlsTrustStorePath	no	string	The absolute storage path of the TLS TrustStore file + the TrustStore file name. This field is required and cannot be empty when the TLS function is enabled and mutual authentication is enabled.
tlsTrustStorePassword	no	string	The absolute storage path of the TLS TrustStorePassword file + the TrustStorePassword file name. This field is required and cannot be empty when the TLS function is enabled and mutual authentication is enabled.

2.2 velocity.properties file:

Name	Required	Type	Description
file.resource.loader.path	yes	string	The absolute path of the master web template. This part is the absolute path plus /resources/templates of the project when the master is deployed. The configuration is consistent with the actual deployment. If the configuration fails, the master front page access fails.

2.3 broker.ini file:

[broker]

The broker system runs the main configuration unit, required unit, and the value is fixed to “[broker]“

Name	Required	Type	Description
brokerId	yes	int	Server unique flag, required field, can be set to 0; when set to 0, the system will default to take the local IP to int value
hostName	yes	string	The host address of the broker external service, required, must be configured in the NIC, is enabled, non-loopback and cannot be IP of 127.0.0.1
port	no	int	Broker listening port, optional, default is 8123
webPort	no	int	Broker’s http management access port, optional, default is 8081
masterAddressList	yes	string	Master address list of the cluster to which the broker belongs. Required fields. The format must be ip1:port1, ip2:port2, ip3:port3.
primaryPath	yes	string	Broker stores the absolute path of the message, mandatory field
maxSegmentSize	no	int	Broker stores the file size of the message data content, optional field, default 512M, maximum 1G
maxIndexSegmentSize	no	int	Broker stores the file size of the message Index content, optional field, default 18M, about 70W messages per file
transferSize	no	int	Broker allows the maximum message content size to be transmitted to the client each time, optional field, default is 512K
consumerRegTimeoutMs	no	long	Consumer heartbeat timeout, optional, in milliseconds, default 30 seconds
socketRecvBuffer	no	long	Socket receives the size of the Buffer buffer SO_RCVBUF, the unit byte, the negative number is not set, the default value is
socketSendBuffer	no	long	Socket sends Buffer buffer SO_SNDBUF size, unit byte, negative number is not set, the default value is
tcpWriteServiceThread	no	int	Broker supports the number of socket worker threads for TCP production services, optional fields, and defaults to 2 times the number of CPUs of the machine.
tcpReadServiceThread	no	int	Broker supports the number of socket worker threads for TCP consumer services, optional fields, defaults to 2 times the number of CPUs of the machine
logClearupDurationMs	no	long	The aging cleanup period of the message file, in milliseconds. The default is 3 minutes for a log cleanup operation. The minimum is 1 minutes.
logFlushDiskDurMs	no	long	Batch check message persistence to file check cycle, in milliseconds, default is 20 seconds for a full check and brush
visitTokenCheckInValidTimeMs	no	long	The length of the delay check for the visitToken check since the Broker is registered, in ms, the default is 120000, the value range [60000, 300000].
visitMasterAuth	no	boolean	Whether the authentication of the master is enabled, the default is false. If true, the user name and signature information are added to the signaling reported to the master.
visitName	no	string	User name of the access master. The default is an empty string. This value must exist when visitMasterAuth is true. The value must be the same as the value of the visitName field in master.ini.
visitPassword	no	string	The password for accessing the master. The default is an empty string. This value must exist when visitMasterAuth is true. The value must be the same as the value of the visitPassword field in master.ini.
logFlushMemDurMs	no	long	Batch check message memory persistence to file check cycle, in milliseconds, default is 10 seconds for a full check and brush

[zookeeper]

The Tube MQ cluster corresponding to the Broker stores the information about the ZooKeeper cluster of the Offset. The required unit has a fixed value of “[zookeeper]“.

Name	Required	Type	Description
zkServerAddr	no	string	Zk server address, optional configuration, defaults to “localhost:2181”
zkNodeRoot	no	string	The root path of the node on zk, optional configuration. The default is “/tube”.
zkSessionTimeoutMs	no	long	Zk heartbeat timeout, in milliseconds, default 30 seconds
zkConnectionTimeoutMs	no	long	Zk connection timeout, in milliseconds, default 30 seconds
zkSyncTimeMs	no	long	Zk data synchronization time, in milliseconds, default 5 seconds
zkCommitPeriodMs	no	long	The interval at which the broker cache data is flushed to zk, in milliseconds, default 5 seconds
zkCommitFailRetries	no	int	The maximum number of re-brushings after Broker fails to flush cached data to Zk

[tlsSetting]

The Master uses TLS to encrypt the transport layer data. When TLS is enabled, the configuration unit provides related settings. The optional unit has a fixed value of “[tlsSetting]“.

Name	Required	Type	Description
tlsEnable	no	boolean	Whether to enable TLS function, optional configuration, default is false
tlsPort	no	int	Broker TLS port number, optional configuration, default is 8124
tlsKeyStorePath	no	string	The absolute storage path of the TLS keyStore file + the name of the keyStore file. This field is required and cannot be empty when the TLS function is enabled.
tlsKeyStorePassword	no	string	The absolute storage path of the TLS keyStorePassword file + the name of the keyStorePassword file. This field is required and cannot be empty when the TLS function is enabled.
tlsTwoWayAuthEnable	no	boolean	Whether to enable TLS mutual authentication, optional configuration, the default is false
tlsTrustStorePath	no	string	The absolute storage path of the TLS TrustStore file + the TrustStore file name. This field is required and cannot be empty when the TLS function is enabled and mutual authentication is enabled.
tlsTrustStorePassword	no	string	The absolute storage path of the TLS TrustStorePassword file + the TrustStorePassword file name. This field is required and cannot be empty when the TLS function is enabled and mutual authentication is enabled.