7、动态保活Worker工作池设计

一、我们如何知道一个Goroutine已经死亡？

实际上，Go语言并没有给我们暴露如何知道一个Goroutine是否存在的接口，如果要证明一个Go是否存在，可以在子Goroutine的业务中，定期写向一个keep live的Channel，然后主Goroutine来发现当前子Go的状态。Go语言在对于Go和Go之间没有像进程和线程一样有强烈的父子、兄弟等关系，每个Go实际上对于调度器都是一个独立的，平等的执行流程。

PS: 如果你是监控子线程、子进程的死亡状态，就没有这么简单了，这里也要感谢go的调度器给我们提供的方便，我们既然用Go，就要基于Go的调度器来实现该模式。

那么，我们如何做到一个Goroutine已经死亡了呢？

子Goroutine

可以通过给一个被监控的Goroutine添加一个defer ，然后recover() 捕获到当前Goroutine的异常状态，最后给主Goroutine发送一个死亡信号，通过Channel。

主Goroutine

在主Goroutine上，从这个Channel读取内容，当读到内容时，就重启这个子Goroutine，当然主Goroutine需要记录子Goroutine的ID，这样也就可以针对性的启动了。

二、代码实现

我们这里以一个工作池的场景来对上述方式进行实现。

WorkerManager作为主Goroutine, worker作为子Goroutine

WorkerManager

type WorkerManager struct {
   //用来监控Worker是否已经死亡的缓冲Channel
   workerChan chan *worker
   // 一共要监控的worker数量
   nWorkers int
}
//创建一个WorkerManager对象
func NewWorkerManager(nworkers int) *WorkerManager {
   return &WorkerManager{
      nWorkers:nworkers,
      workerChan: make(chan *worker, nworkers),
   }
}
//启动worker池，并为每个Worker分配一个ID，让每个Worker进行工作
func (wm *WorkerManager)StartWorkerPool() {
   //开启一定数量的Worker
   for i := 0; i < wm.nWorkers; i++ {
      i := i
      wk := &worker{id: i}
      go wk.work(wm.workerChan)
   }
  //启动保活监控
   wm.KeepLiveWorkers()
}
//保活监控workers
func (wm *WorkerManager) KeepLiveWorkers() {
   //如果有worker已经死亡 workChan会得到具体死亡的worker然后 打出异常，然后重启
   for wk := range wm.workerChan {
      // log the error
      fmt.Printf("Worker %d stopped with err: [%v] \n", wk.id, wk.err)
      // reset err
      wk.err = nil
      // 当前这个wk已经死亡了，需要重新启动他的业务
      go wk.work(wm.workerChan)
   }
}

worker ```go type worker struct { id int err error }

func (wk worker) work(workerChan chan<- worker) (err error) { // 任何Goroutine只要异常退出或者正常退出 都会调用defer 函数，所以在defer中想WorkerManager的WorkChan发送通知 defer func() { //捕获异常信息，防止panic直接退出 if r := recover(); r != nil { if err, ok := r.(error); ok { wk.err = err } else { wk.err = fmt.Errorf(“Panic happened with [%v]”, r) } } else { wk.err = err }

 //通知 主 Goroutine，当前子Goroutine已经死亡
  workerChan <- wk

}()

// do something fmt.Println(“Start Worker…ID = “, wk.id)

// 每个worker睡眠一定时间之后，panic退出或者 Goexit()退出 for i := 0; i < 5; i++ { time.Sleep(time.Second*1) }

panic(“worker panic..”) //runtime.Goexit()

return err }

### 三、测试
>main
```go
func main() {
   wm := NewWorkerManager(10)
   wm.StartWorkerPool()
}

结果：

$ go run workmanager.go 
Start Worker...ID =  2
Start Worker...ID =  1
Start Worker...ID =  3
Start Worker...ID =  4
Start Worker...ID =  7
Start Worker...ID =  6
Start Worker...ID =  8
Start Worker...ID =  9
Start Worker...ID =  5
Start Worker...ID =  0
Worker 9 stopped with err: [Panic happened with [worker panic..]] 
Worker 1 stopped with err: [Panic happened with [worker panic..]] 
Worker 0 stopped with err: [Panic happened with [worker panic..]] 
Start Worker...ID =  9
Start Worker...ID =  1
Worker 2 stopped with err: [Panic happened with [worker panic..]] 
Worker 5 stopped with err: [Panic happened with [worker panic..]] 
Worker 4 stopped with err: [Panic happened with [worker panic..]] 
Start Worker...ID =  0
Start Worker...ID =  2
Start Worker...ID =  4
Start Worker...ID =  5
Worker 7 stopped with err: [Panic happened with [worker panic..]] 
Worker 8 stopped with err: [Panic happened with [worker panic..]] 
Worker 6 stopped with err: [Panic happened with [worker panic..]] 
Worker 3 stopped with err: [Panic happened with [worker panic..]] 
Start Worker...ID =  3
Start Worker...ID =  6
Start Worker...ID =  8
Start Worker...ID =  7
...
...

我们会发现，无论子Goroutine是因为 panic()异常退出，还是Goexit()退出，都会被主Goroutine监听到并且重启。主要我们就能够起到保活的功能了. 当然如果线程死亡？进程死亡？我们如何保证？ 大家不用担心，我们用Go开发实际上是基于Go的调度器来开发的，进程、线程级别的死亡，会导致调度器死亡，那么我们的全部基础框架都将会塌陷。那么就要看线程、进程如何保活啦，不在我们Go开发的范畴之内了。