Node Device Manager User Guide

Node Device Manager User Guide

This section provides the operations need to performed by the Admin for configuring NDM.

Admin operations

Create blockdevice CRs for partitioned disks

Admin Operations

Include filters

Users can include only selected block device for the creation of blockdevice CR and then use only the created blockdevice CR for cStor pool creation or using for provisioning Local PV based on device. For including the selected blockdevices, update the operator YAML file with the required blockdevices under NDM configuration section so that only these blockdevice will be taken for the creation of blockdevice CR. Add the blockdevice path in the following configuration for specifying particular disks. This configuration must be added in openebs-ndm-config under Configmap in openebs-operator.yaml.

This change must be done in the openebs-operator.yaml file that you have downloaded before OpenEBS installation. If the change is performed after the OpenEBS installation, then user must restart corresponding NDM DaemonSet pods to update the NDM configuration.

filterconfigs:
- key: path-filter
  name: path filter
  state: true
  include: "/dev/sda"
  exclude: ""

When the above configuration is used, only the block device /dev/sda will be used for creating the block device custom resource. All other disks will be excluded.

Note:

Regex support is not available on the filterconfigs in NDM Configmap and the Configmap is applicable to cluster level. This means, if user provide /dev/sdb in filterconfigs as an include filter, then all /dev/sdb blockdevices from all nodes in the cluster will be used for the creation of blockdevice CR by NDM.

Exclude filters

NDM do some filtering on the disks to exclude, for example boot disk. By default, NDM excludes the following device path while creating block device CR. This configuration is added in openebs-ndm-config under Configmap in openebs-operator.yaml.

/dev/loop - loop devices.
/dev/fd - file descriptors.
/dev/sr - CD-ROM devices.
/dev/ram - ramdisks.
/dev/dm -lvm.
/dev/md -multiple device ( software RAID devices).

The following is the snippet of NDM configuration file from openebs operator YAML which excludes the provided disks/paths.

filterconfigs:
  - key: os-disk-exclude-filter
    name: os disk exclude filter
    state: true
    exclude: "/,/etc/hosts,/boot"
  - key: vendor-filter
    name: vendor filter
    state: true
    include: ""
    exclude: "CLOUDBYT,OpenEBS"
  - key: path-filter
    name: path filter
    state: true
    include: ""
    exclude: "loop,/dev/fd0,/dev/sr0,/dev/ram,/dev/dm-,/dev/md"

It is also possible to customize by adding more disk types associated with your nodes. For example, used disks, unwanted disks and so on.

filterconfigs:
  - key: path-filter
    name: path filter
    state: true
    include: ""
    exclude: "loop,/dev/fd0,/dev/sr0,/dev/ram,/dev/dm-,/dev/md,/dev/sdb"

Note:

Regex support is not available on the filterconfigs in NDM Configmap and the Configmap is applicable to cluster level. This means, if user provide /dev/sdb in configmap as an exlcuded filter, then all /dev/sdb blockdevices from all nodes in the cluster will be excluded by NDM.

It is recommended to use OpenEBS provisioner alone in the cluster. If you are using other storage provider provisioner like gce-pd along with OpenEBS, use exclude filters to avoid those disks from being consumed by OpenEBS. For example, if you are using the standard storage class in GKE with storage provisioner as kubernetes.io/gce-pd, and when it creates a PVC, a GPD is attached to the node. This GPD will be detected by NDM and it may be used by OpenEBS for provisioning volume. To avoid this scenario, it is recommended to put the associated device path created on the node in the exclude field under path-filter. If GPD is attached as /dev/sdc , then add /dev/sdc in the above mentioned field.

Example snippet:

In the downloaded openebs-operator.yaml, find openebs-ndm-config configmap and update the values for path-filter and any other filters if required.

---
# This is the node-disk-manager related config.
# It can be used to customize the disks probes and filters
apiVersion: v1
kind: ConfigMap
metadata:
 name: openebs-ndm-config
 namespace: openebs
data:
 # udev-probe is default or primary probe which should be enabled to run ndm
 # filterconfigs contails configs of filters - in their form fo include
 # and exclude comma separated strings
 node-disk-manager.config: |
   probeconfigs:
     - key: udev-probe
       name: udev probe
       state: true
     - key: seachest-probe
       name: seachest probe
       state: false
     - key: smart-probe
       name: smart probe
       state: true
   filterconfigs:
     - key: os-disk-exclude-filter
       name: os disk exclude filter
       state: true
       exclude: "/,/etc/hosts,/boot"
     - key: vendor-filter
       name: vendor filter
       state: true
       include: ""
       exclude: "CLOUDBYT,OpenEBS"
     - key: path-filter
       name: path filter
       state: true
       include: ""
       exclude: "loop,/dev/fd0,/dev/sr0,/dev/ram,/dev/dm-,/dev/md,/dev/sdc"
---

Create blockdevice CRs for partitioned disks

Currently, NDM is not selecting partitioned disks for creating device resource. But, you can create block device resource for the partitioned disks manually. The following are the steps for the creation of block device resource.

Create the sample block device CR YAML using the following spec. Following is the sample block device CR YAML.

 apiVersion: openebs.io/v1alpha1
 kind: BlockDevice
 metadata:
   name: example-blockdevice-1
   labels:
     kubernetes.io/hostname: <host name in which disk/blockdevice is attached> # like gke-openebs-user-default-pool-044afcb8-bmc0
     ndm.io/managed: "false" # for manual blockdevice creation put false
     ndm.io/blockdevice-type: blockdevice
 status:
   claimState: Unclaimed
   state: Active
 spec:
   capacity:
     logicalSectorSize: 512
     storage: <total capacity in bytes> #like 53687091200
   details:
     firmwareRevision: <firmware revision>
     model: <model name of blockdevice> # like PersistentDisk
     serial: <serial no of disk> # like google-disk-2
     compliance: <compliance of disk> #like "SPC-4"
     vendor: <vendor of disk> #like Google
   devlinks:
   - kind: by-id
     links:
     - <link1> # like /dev/disk/by-id/scsi-0Google_PersistentDisk_disk-2
     - <link2> # like /dev/disk/by-id/google-disk-2
   - kind: by-path
     links:
     - <link1> # like /dev/disk/by-path/virtio-pci-0000:00:03.0-scsi-0:0:2:0
   nodeAttributes:
     nodeName: <node name> # output of `kubectl get nodes` can be used
   path: <devpath> # like /dev/sdb1

Modify the created block device CR sample YAML with the partition disk information. In the above block device CR sample spec, following fields must be filled before applying the YAML.
- name
  - Provide unique name for the blockdevice CR. In the above YAML spec, given name for the blockdevice CR is example-blockdevice-1
- kubernetes.io/hostname
  - Hostname of the node where the blockdevice is attached.
- storage
  - Provide the storage capacity in bytes like 53687091200.
- logicalSectorSize
  - logical sector size of blockdevice. For example, 512, 4096 etc. Provided 512 in the above example snippet. This value can be changed as per the logical sector size of the device.
- links
  - This field should be filled for by-id and by-path. These details can be obtained from worker node by running the following command udevadm info -q property -n <device_path>
- nodeName
  - Name of the Node where the blockdevice is attached. The output of kubectl get nodes can be used to obtain this value.
- path
  - The value should be like /dev/sdb1.
Apply the modified YAML file to create the blockdevice CR for the provided partitioned device path.
```
kubectl apply -f <blockdevice-cr.yaml> -n <openebs_namespace>
```
Note: The blockdevice CR should be created on the same namespace where openebs is installed.
Repeat the same steps for each partitioned device and create blockdevice CR for each device.
Verify if the blockdevice is created by running the following kubectl get blockdevice -n openebs command.

Note: If you are creating a block device CR for a partitioned device path, then you must add the corresponding disk under exclude filter so that NDM will not select the particular disk for BD creation. For example, /dev/sdb have 2 partitions, say /dev/sdb1 and /dev/sdb2. If block device CR is created for /dev/sdb1 manually, then you must add /dev/sdb under exclude filter of NDM configuration. See here for customizing the exclude filter in NDM configuration.

Feedback

Was this page helpful?

YesNo

Thanks for the feedback. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement. Engage and get additional help on https://kubernetes.slack.com/messages/openebs/.

NDM

Node Device Manager User Guide

Admin operations

Admin Operations

Include filters

Exclude filters

Create blockdevice CRs for partitioned disks

See Also:

Understanding Node Disk Manager

Feedback