Using volumes to persist container data

• Understanding volumes
• Working with volumes using the OKD CLI
• Listing volumes and volume mounts in a pod
• Adding volumes to a pod
• Updating volumes and volume mounts in a pod
• Removing volumes and volume mounts from a pod
• Configuring volumes for multiple uses in a pod

Files in a container are ephemeral. As such, when a container crashes or stops, the data is lost. You can use volumes to persist the data used by the containers in a pod. A volume is directory, accessible to the Containers in a pod, where data is stored for the life of the pod.

Understanding volumes

Volumes are mounted file systems available to pods and their containers which may be backed by a number of host-local or network attached storage endpoints. Containers are not persistent by default; on restart, their contents are cleared.

To ensure that the file system on the volume contains no errors and, if errors are present, to repair them when possible, OKD invokes the fsck utility prior to the mount utility. This occurs when either adding a volume or updating an existing volume.

The simplest volume type is emptyDir, which is a temporary directory on a single machine. Administrators may also allow you to request a persistent volume that is automatically attached to your pods.

Working with volumes using the OKD CLI

You can use the CLI command oc set volume to add and remove volumes and volume mounts for any object that has a pod template like replication controllers or deployment configs. You can also list volumes in pods or any object that has a pod template.

The oc set volume command uses the following general syntax:

$ oc set volume <object_selection> <operation> <mandatory_parameters> <options>

Object selection

Specify one of the following for the object_selection parameter in the oc set volume command:

Operation

Specify --add or --remove for the operation parameter in the oc set volume command.

Mandatory parameters

Any mandatory parameters are specific to the selected operation and are discussed in later sections.

Options

Any options are specific to the selected operation and are discussed in later sections.

Listing volumes and volume mounts in a pod

You can list volumes and volume mounts in pods or pod templates:

Procedure

To list volumes:

$ oc set volume <object_type>/<name> [options]

List volume supported options:

For example:

• To list all volumes for pod p1:

  $ oc set volume pod/p1

• To list volume v1 defined on all deployment configs:

  $ oc set volume dc --all --name=v1

Adding volumes to a pod

You can add volumes and volume mounts to a pod.

Procedure

To add a volume, a volume mount, or both to pod templates:

$ oc set volume <object_type>/<name> --add [options]

For example:

• To add a new volume source emptyDir to the registry DeploymentConfig object:

  $ oc set volume dc/registry --add

• To add volume v1 with secret secret1 for replication controller r1 and mount inside the containers at /data:

  $ oc set volume rc/r1 --add --name=v1 --type=secret --secret-name='secret1' --mount-path=/data

• To add existing persistent volume v1 with claim name pvc1 to deployment configuration dc.json on disk, mount the volume on container c1 at /data, and update the DeploymentConfig object on the server:

  $ oc set volume -f dc.json --add --name=v1 --type=persistentVolumeClaim \
    --claim-name=pvc1 --mount-path=/data --containers=c1

• To add a volume v1 based on Git repository https://github.com/namespace1/project1 with revision 5125c45f9f563 for all replication controllers:

  $ oc set volume rc --all --add --name=v1 \
    --source='{"gitRepo": {
                  "repository": "https://github.com/namespace1/project1",
                  "revision": "5125c45f9f563"
              }}'

Updating volumes and volume mounts in a pod

You can modify the volumes and volume mounts in a pod.

Procedure

Updating existing volumes using the --overwrite option:

$ oc set volume <object_type>/<name> --add --overwrite [options]

For example:

• To replace existing volume v1 for replication controller r1 with existing persistent volume claim pvc1:

  $ oc set volume rc/r1 --add --overwrite --name=v1 --type=persistentVolumeClaim --claim-name=pvc1

• To change the DeploymentConfig object d1 mount point to /opt for volume v1:

  $ oc set volume dc/d1 --add --overwrite --name=v1 --mount-path=/opt

Removing volumes and volume mounts from a pod

You can remove a volume or volume mount from a pod.

Procedure

To remove a volume from pod templates:

$ oc set volume <object_type>/<name> --remove [options]

For example:

• To remove a volume v1 from the DeploymentConfig object d1:

  $ oc set volume dc/d1 --remove --name=v1

• To unmount volume v1 from container c1 for the DeploymentConfig object d1 and remove the volume v1 if it is not referenced by any containers on d1:

  $ oc set volume dc/d1 --remove --name=v1 --containers=c1

• To remove all volumes for replication controller r1:

  $ oc set volume rc/r1 --remove --confirm

Configuring volumes for multiple uses in a pod

You can configure a volume to allows you to share one volume for multiple uses in a single pod using the volumeMounts.subPath property to specify a subPath value inside a volume instead of the volume’s root.

Procedure

1. View the list of files in the volume, run the oc rsh command:

   $ oc rsh <pod>

   Example output

   sh-4.2$ ls /path/to/volume/subpath/mount
   example_file1 example_file2 example_file3

2. Specify the subPath:

   Example Pod spec with subPath parameter

   apiVersion: v1
   kind: Pod
   metadata:
     name: my-site
   spec:
       containers:
       - name: mysql
         image: mysql
         volumeMounts:
         - mountPath: /var/lib/mysql
           name: site-data
           subPath: mysql (1)
       - name: php
         image: php
         volumeMounts:
         - mountPath: /var/www/html
           name: site-data
           subPath: html (2)
       volumes:
       - name: site-data
         persistentVolumeClaim:
           claimName: my-site-data

   1	Databases are stored in the mysql folder.
   2	HTML content is stored in the html folder.