Allocating Node Resources

You are viewing documentation for a release that is no longer supported. The latest supported version of version 3 is [3.11]. For the most recent version 4, see [4]

You are viewing documentation for a release that is no longer supported. The latest supported version of version 3 is [3.11]. For the most recent version 4, see [4]

Overview

To provide more reliable scheduling and minimize node resource overcommitment, each node can reserve a portion of its resources for use by all underlying node components (e.g., kubelet, kube-proxy, Docker) and the remaining system components (e.g., sshd, NetworkManager) on the host. Once specified, the scheduler has more information about the resources (e.g., memory, CPU) a node has allocated for pods.

Configuring Nodes for Allocated Resources

Resources reserved for node components are based on two node settings:

You can set these in the **kubeletArguments** section of the node configuration map by using a set of <resource_type>=<resource_quantity> pairs (e.g., cpu=200m,memory=512Mi). Add the section if it does not already exist:

Example 1. Node Allocatable Resources Settings

kubeletArguments:
  kube-reserved:
    - "cpu=200m,memory=512Mi"
  system-reserved:
    - "cpu=200m,memory=512Mi"

OKD currently supports the **cpu** and **memory** resource types. If your administrator enabled the ephemeral storage technology preview, the **ephemeral-resource** resource type is supported as well. For **cpu**, the resource quantity is specified in units of cores, such as 200m, 0.5, or 1. For **memory** and **ephemeral-storage**, it is specified in units of bytes, such as 200Ki, 50Mi, or 5Gi.

The ephemeral storage management feature is disabled by default. To enable this feature, see configuring for ephemeral storage.

See Compute Resources for more details.

If a flag is not set, it defaults to 0. If none of the flags are set, the allocated resource is set to the node’s capacity as it was before the introduction of allocatable resources.

Computing Allocated Resources

An allocated amount of a resource is computed based on the following formula:

[Allocatable] = [Node Capacity] - [kube-reserved] - [system-reserved] - [Hard-Eviction-Thresholds]

If [Allocatable] is negative, it is set to 0.

Viewing Node Allocatable Resources and Capacity

To see a node’s current capacity and allocatable resources, you can run:

$ oc get node/<node_name> -o yaml
...
status:
...
  allocatable:
    cpu: "4"
    memory: 8010948Ki
    pods: "110"
  capacity:
    cpu: "4"
    memory: 8010948Ki
    pods: "110"
...

System Resources Reported by Node

Starting with OKD 1.3, each node reports system resources utilized by the container runtime and kubelet. To better aid your ability to configure **--system-reserved** and **--kube-reserved**, you can introspect corresponding node’s resource usage using the node summary API, which is accessible at <master>/api/v1/nodes/<node>/proxy/stats/summary.

For instance, to access the resources from cluster.node22 node, you can run:

$ curl <certificate details> https://<master>/api/v1/nodes/cluster.node22/proxy/stats/summary
{
    "node": {
        "nodeName": "cluster.node22",
        "systemContainers": [
            {
                "cpu": {
                    "usageCoreNanoSeconds": 929684480915,
                    "usageNanoCores": 190998084
                },
                "memory": {
                    "rssBytes": 176726016,
                    "usageBytes": 1397895168,
                    "workingSetBytes": 1050509312
                },
                "name": "kubelet"
            },
            {
                "cpu": {
                    "usageCoreNanoSeconds": 128521955903,
                    "usageNanoCores": 5928600
                },
                "memory": {
                    "rssBytes": 35958784,
                    "usageBytes": 129671168,
                    "workingSetBytes": 102416384
                },
                "name": "runtime"
            }
        ]
    }
}

See REST API Overview for more details about certificate details.

Node enforcement

The node is able to limit the total amount of resources that pods may consume based on the configured allocatable value. This feature significantly improves the reliability of the node by preventing pods from starving system services (for example: container runtime, node agent, etc.) for resources. It is strongly encouraged that administrators reserve resources based on the desired node utilization target in order to improve node reliability.

The node enforces resource constraints using a new cgroup hierarchy that enforces quality of service. All pods are launched in a dedicated cgroup hierarchy separate from system daemons.

To configure this ability, the following kubelet arguments are provided.

Example 2. Node Cgroup Settings

kubeletArguments:
  cgroups-per-qos:
    - "true" (1)
  cgroup-driver:
    - "systemd" (2)
  enforce-node-allocatable:
    - "pods" (3)

Optionally, the node can be made to enforce kube-reserved and system-reserved by specifying those tokens in the enforce-node-allocatable flag. If specified, the corresponding --kube-reserved-cgroup or --system-reserved-cgroup needs to be provided. In future releases, the node and container runtime will be packaged in a common cgroup separate from system.slice. Until that time, we do not recommend users change the default value of enforce-node-allocatable flag.

Administrators should treat system daemons similar to Guaranteed pods. System daemons can burst within their bounding control groups and this behavior needs to be managed as part of cluster deployments. Enforcing system-reserved limits can lead to critical system services being CPU starved or OOM killed on the node. The recommendation is to enforce system-reserved only if operators have profiled their nodes exhaustively to determine precise estimates and are confident in their ability to recover if any process in that group is OOM killed.

As a result, we strongly recommended that users only enforce node allocatable for pods by default, and set aside appropriate reservations for system daemons to maintain overall node reliability.

Eviction Thresholds

If a node is under memory pressure, it can impact the entire node and all pods running on it. If a system daemon is using more than its reserved amount of memory, an OOM event may occur that can impact the entire node and all pods running on it. To avoid (or reduce the probability of) system OOMs the node provides Out Of Resource Handling.

By reserving some memory via the --eviction-hard flag, the node attempts to evict pods whenever memory availability on the node drops below the absolute value or percentage. If system daemons did not exist on a node, pods are limited to the memory capacity - eviction-hard. For this reason, resources set aside as a buffer for eviction before reaching out of memory conditions are not available for pods.

Here is an example to illustrate the impact of node allocatable for memory:

• Node capacity is 32Gi

• --kube-reserved is 2Gi

• --system-reserved is 1Gi

• --eviction-hard is set to <100Mi.

For this node, the effective node allocatable value is 28.9Gi. If the node and system components use up all their reservation, the memory available for pods is 28.9Gi, and kubelet will evict pods when it exceeds this usage.

If we enforce node allocatable (28.9Gi) via top level cgroups, then pods can never exceed 28.9Gi. Evictions would not be performed unless system daemons are consuming more than 3.1Gi of memory.

If system daemons do not use up all their reservation, with the above example, pods would face memcg OOM kills from their bounding cgroup before node evictions kick in. To better enforce QoS under this situation, the node applies the hard eviction thresholds to the top-level cgroup for all pods to be Node Allocatable + Eviction Hard Thresholds.

If system daemons do not use up all their reservation, the node will evict pods whenever they collectively consume more than 28.9Gi of memory. If eviction does not occur in time, a pod will be OOM killed if pods collectively consume 29Gi of memory.

Scheduler

The scheduler now uses the value of **node.Status.Allocatable** instead of **node.Status.Capacity** to decide if a node will become a candidate for pod scheduling.

By default, the node will report its machine capacity as fully schedulable by the cluster.