Linkis-Cli usage documentation

Linkis-Cli usage documentation

Introduction

Linkis-Cli is a shell command line program used to submit tasks to Linkis.

Basic case

You can simply submit a task to Linkis by referring to the example below

The first step is to check whether the default configuration file linkis-cli.properties exists in the conf/ directory, and it contains the following configuration:

   wds.linkis.client.common.gatewayUrl=http://127.0.0.1:9001
   wds.linkis.client.common.authStrategy=token
   wds.linkis.client.common.tokenKey=Validation-Code
   wds.linkis.client.common.tokenValue=BML-AUTH

The second step is to enter the linkis installation directory and enter the command:

   sh ./bin/linkis-cli -engineType spark-2.4.3 -codeType sql -code "select count(*) from testdb.test;"  -submitUser hadoop -proxyUser hadoop

In the third step, you will see the information on the console that the task has been submitted to linkis and started to execute.

Linkis-cli currently only supports synchronous submission, that is, after submitting a task to linkis, it will continue to inquire about the task status and pull task logs until the task ends. If the status is successful at the end of the task, linkis-cli will also actively pull the result set and output it.

How to use

   sh ./bin/linkis-cli [parameter] [cli parameter]

Supported parameter list

cli parameters

Parameter	Description	Data Type	Is Required
—gwUrl	Manually specify the linkis gateway address	String	No
—authStg	Specify authentication policy	String	No
—authKey	Specify authentication key	String	No
—authVal	Specify authentication value	String	No
—userConf	Specify the configuration file location	String	No

Parameters

Parameter	Description	Data Type	Is Required
-engType	Engine Type	String	Yes
-runType	Execution Type	String	Yes
-code	Execution code	String	No
-codePath	Local execution code file path	String	No
-smtUsr	Specify the submitting user	String	No
-pxyUsr	Specify the execution user	String	No
-creator	Specify creator	String	No
-scriptPath	scriptPath	String	No
-outPath	Path of output result set to file	String	No
-confMap	configuration map	Map	No
-varMap	variable map for variable substitution	Map	No
-labelMap	linkis labelMap	Map	No
-sourceMap	Specify linkis sourceMap	Map	No

Detailed example

One, add cli parameters

Cli parameters can be passed in manually specified, this way will overwrite the conflicting configuration items in the default configuration file

    sh ./bin/linkis-cli -engineType spark-2.4.3 -codeType sql -code "select count(*) from testdb.test;" -submitUser hadoop -proxyUser hadoop --gwUrl http://127.0.0.1:9001- -authStg token --authKey [tokenKey] --authVal [tokenValue]

Two, add engine initial parameters

The initial parameters of the engine can be added through the -confMap parameter. Note that the data type of the parameter is Map. The input format of the command line is as follows:

    -confMap key1=val1,key2=val2,...

For example: the following example sets startup parameters such as the yarn queue for engine startup and the number of spark executors:

  sh ./bin/linkis-cli -engineType spark-2.4.3 -codeType sql -confMap wds.linkis.yarnqueue=q02,spark.executor.instances=3 -code "select count(*) from testdb.test;"  -submitUser hadoop -proxyUser hadoop

Of course, these parameters can also be read in a configuration file, we will talk about it later

Three, add tags

Labels can be added through the -labelMap parameter. Like the -confMap, the type of the -labelMap parameter is also Map:

  sh ./bin/linkis-cli -engineType spark-2.4.3 -codeType sql -labelMap labelKey=labelVal -code "select count(*) from testdb.test;"  -submitUser hadoop -proxyUser hadoop

Fourth, variable replacement

Linkis-cli variable substitution is realized by ${} symbol and -varMap

   sh ./bin/linkis-cli -engineType spark-2.4.3 -codeType sql -code "select count(*) from \${key};" -varMap key=testdb.test  -submitUser hadoop -proxyUser hadoop

During execution, the sql statement will be replaced with:

   select count(*) from testdb.test

Note that the escape character in '\$' is to prevent the parameter from being parsed in advance by linux. If -codePath specifies the local script mode, the escape character is not required

Five, use user configuration

linkis-cli supports loading user-defined configuration files, the configuration file path is specified by the --userConf parameter, and the configuration file needs to be in the file format of .properties

  sh ./bin/linkis-cli -engineType spark-2.4.3 -codeType sql -code "select count(*) from testdb.test;"  -submitUser hadoop -proxyUser hadoop  --userConf [configuration file path]

Which parameters can be configured?

All parameters can be configured, for example:

cli parameters:

   wds.linkis.client.common.gatewayUrl=http://127.0.0.1:9001
   wds.linkis.client.common.authStrategy=static
   wds.linkis.client.common.tokenKey=[tokenKey]
   wds.linkis.client.common.tokenValue=[tokenValue]

parameter:

   wds.linkis.client.label.engineType=spark-2.4.3
   wds.linkis.client.label.codeType=sql

When the Map class parameters are configured, the format of the key is

    [Map prefix] + [key]

The Map prefix includes:

ExecutionMap prefix: wds.linkis.client.exec
sourceMap prefix: wds.linkis.client.source
ConfigurationMap prefix: wds.linkis.client.param.conf
runtimeMap prefix: wds.linkis.client.param.runtime
labelMap prefix: wds.linkis.client.label

Note:

variableMap does not support configuration
When there is a conflict between the configured key and the key entered in the command parameter, the priority is as follows:
```
Instruction Parameters> Key in Instruction Map Type Parameters> User Configuration> Default Configuration
```

Example:

Configure engine startup parameters:

   wds.linkis.client.param.conf.spark.executor.instances=3
   wds.linkis.client.param.conf.wds.linkis.yarnqueue=q02

Configure labelMap parameters:

   wds.linkis.client.label.myLabel=label123

Six, output result set to file

Use the -outPath parameter to specify an output directory, linkis-cli will output the result set to a file, and each result set will automatically create a file. The output format is as follows:

    task-[taskId]-result-[idx].txt

E.g:

    task-906-result-1.txt
    task-906-result-2.txt
    task-906-result-3.txt

Linkis-Cli Manual