Apache Kafka Source

Tutorial on how to build and deploy a KafkaSource event source.

Background

The KafkaSource reads all the messages, from all partitions, and sends those messages as CloudEvents through HTTP to its configured sink. The KafkaSource supports an ordered consumer delivery guaranty, which is a per-partition blocking consumer that waits for a successful response from the CloudEvent subscriber before it delivers the next message of the partition.

Installing Kafka source

  1. Install the Kafka controller by entering the following command:

    1. kubectl apply --filename https://github.com/knative-sandbox/eventing-kafka-broker/releases/download/knative-v1.3.2/eventing-kafka-controller.yaml

  2. Install the Kafka Source data plane by entering the following command:

    1. kubectl apply --filename https://github.com/knative-sandbox/eventing-kafka-broker/releases/download/knative-v1.3.2/eventing-kafka-source.yaml

  3. Verify that kafka-controller and kafka-source-dispatcher are running, by entering the following command:

    1. kubectl get deployments.apps -n knative-eventing

    Example output:

    1. NAME                           READY   UP-TO-DATE   AVAILABLE   AGE
    2. kafka-controller               1/1     1            1           3s
    3. kafka-source-dispatcher        1/1     1            1           4s

Create a Kafka topic

Note

The create a Kafka topic section assumes you’re using Strimzi to operate Apache Kafka, however equivalent operations can be replicated using the Apache Kafka CLI or any other tool.

If you are using Strimzi:

  1. Create a KafkaTopic YAML file:

    1. apiVersion: kafka.strimzi.io/v1beta2
    2. kind: KafkaTopic
    3. metadata:
    4.   name: knative-demo-topic
    5.   namespace: kafka
    6.   labels:
    7.     strimzi.io/cluster: my-cluster
    8. spec:
    9.   partitions: 3
    10.   replicas: 1
    11.   config:
    12.     retention.ms: 7200000
    13.     segment.bytes: 1073741824

  2. Deploy the KafkaTopic YAML file by running the command:

    1. kubectl apply -f <filename>.yaml

    Where <filename> is the name of your KafkaTopic YAML file.

    Example output:

    1. kafkatopic.kafka.strimzi.io/knative-demo-topic created

  3. Ensure that the KafkaTopic is running by running the command:

    1. kubectl -n kafka get kafkatopics.kafka.strimzi.io

    Example output:

    1. NAME                 AGE
    2. knative-demo-topic   16s

Create a Service

  1. Clone the sample code GitHub repository, and navigate to the local directory of the repository:

    1. git clone -b "release-1.3" https://github.com/knative/docs knative-docs
    1. cd knative-docs/code-samples/eventing/kafka/source

    2. Create the event-display Service as a YAML file:

    1. apiVersion: serving.knative.dev/v1
    2. kind: Service
    3. metadata:
    4.   name: event-display
    5.   namespace: default
    6. spec:
    7.   template:
    8.     spec:
    9.       containers:
    10.         - # This corresponds to
    11.           # https://github.com/knative/eventing/tree/main/cmd/event_display/main.go
    12.           image: gcr.io/knative-releases/knative.dev/eventing/cmd/event_display

  2. Apply the YAML file by running the command:

    1. kubectl apply -f <filename>.yaml

    Where <filename> is the name of the file you created in the previous step.

    Example output:

    1. service.serving.knative.dev/event-display created

  3. Ensure that the Service Pod is running, by running the command:

    1. kubectl get pods

    The Pod name is prefixed with event-display:

    1. NAME                                            READY     STATUS    RESTARTS   AGE
    2. event-display-00001-deployment-5d5df6c7-gv2j4   2/2       Running   0          72s

Kafka event source

  1. Modify source/event-source.yaml accordingly with bootstrap servers, topics, and so on:

    1. apiVersion: sources.knative.dev/v1beta1
    2. kind: KafkaSource
    3. metadata:
    4.   name: kafka-source
    5. spec:
    6.   consumerGroup: knative-group
    7.   bootstrapServers:
    8.   - my-cluster-kafka-bootstrap.kafka:9092 # note the kafka namespace
    9.   topics:
    10.   - knative-demo-topic
    11.   sink:
    12.     ref:
    13.       apiVersion: serving.knative.dev/v1
    14.       kind: Service
    15.       name: event-display

  2. Deploy the event source:

    1. kubectl apply -f event-source.yaml

    Example output:

    1. kafkasource.sources.knative.dev/kafka-source created

  3. Verify that the KafkaSource is ready:

    1. kubectl get kafkasource kafka-source

    Example output:

    1. NAME           TOPICS                   BOOTSTRAPSERVERS                            READY   REASON   AGE
    2. kafka-source   ["knative-demo-topic"]   ["my-cluster-kafka-bootstrap.kafka:9092"]   True             26h

Verify

  1. Produce a message ({"msg": "This is a test!"}) to the Apache Kafka topic as in the following example:

    1. kubectl -n kafka run kafka-producer -ti --image=strimzi/kafka:0.14.0-kafka-2.3.0 --rm=true --restart=Never -- bin/kafka-console-producer.sh --broker-list my-cluster-kafka-bootstrap:9092 --topic knative-demo-topic

    Tip

    If you don’t see a command prompt, try pressing Enter.

  2. Verify that the Service received the message from the event source:

    1. kubectl logs --selector='serving.knative.dev/service=event-display' -c user-container

    Example output:

    1. ☁️ cloudevents.Event
    2. Validation: valid
    3. Context Attributes,
    4.   specversion: 1.0
    5.   type: dev.knative.kafka.event
    6.   source: /apis/v1/namespaces/default/kafkasources/kafka-source#my-topic
    7.   subject: partition:0#564
    8.   id: partition:0/offset:564
    9.   time: 2020-02-10T18:10:23.861866615Z
    10.   datacontenttype: application/json
    11. Extensions,
    12.   key:
    13. Data,
    14.     {
    15.       "msg": "This is a test!"
    16.     }

Clean up steps

  1. Delete the Kafka event source:

    1. kubectl delete -f source/source.yaml kafkasource.sources.knative.dev

    Example output:

    1. "kafka-source" deleted

  2. Delete the event-display Service:

    1. kubectl delete -f source/event-display.yaml service.serving.knative.dev

    Example output:

    1. "event-display" deleted

  3. Optional: Remove the Apache Kafka Topic

    1. kubectl delete -f kafka-topic.yaml

    Example output:

    1. kafkatopic.kafka.strimzi.io "knative-demo-topic" deleted

Optional: Specify the key deserializer

When KafkaSource receives a message from Kafka, it dumps the key in the Event extension called Key and dumps Kafka message headers in the extensions starting with kafkaheader.

You can specify the key deserializer among four types:

  • string (default) for UTF-8 encoded strings
  • int for 32-bit & 64-bit signed integers
  • float for 32-bit & 64-bit floating points
  • byte-array for a Base64 encoded byte array

To specify the key deserializer, add the label kafkasources.sources.knative.dev/key-type to the KafkaSource definition, as shown in the following example:

  1. apiVersion: sources.knative.dev/v1beta1
  2. kind: KafkaSource
  3. metadata:
  4. name: kafka-source
  5. labels:
  6.   kafkasources.sources.knative.dev/key-type: int
  7. spec:
  8. consumerGroup: knative-group
  9. bootstrapServers:
  10. - my-cluster-kafka-bootstrap.kafka:9092 # note the kafka namespace
  11. topics:
  12. - knative-demo-topic
  13. sink:
  14.   ref:
  15.     apiVersion: serving.knative.dev/v1
  16.     kind: Service
  17.     name: event-display

Optional: Specify the initial offset

By default the KafkaSource starts consuming from the latest offset in each partition. If you want to consume from the earliest offset, set the initialOffset field to earliest, for example:

  1. apiVersion: sources.knative.dev/v1beta1
  2. kind: KafkaSource
  3. metadata:
  4.   name: kafka-source
  5. spec:
  6. consumerGroup: knative-group
  7. initialOffset: earliest
  8. bootstrapServers:
  9. - my-cluster-kafka-bootstrap.kafka:9092 # note the kafka namespace
  10. topics:
  11. - knative-demo-topic
  12. sink:
  13.   ref:
  14.     apiVersion: serving.knative.dev/v1
  15.     kind: Service
  16.     name: event-display

Note

The valid values for initialOffset are earliest and latest. Any other value results in a validation error. This field is honored only if there are no committed offsets for that consumer group.

Connecting to a TLS-enabled Kafka Broker

The KafkaSource supports TLS and SASL authentication methods. To enable TLS authentication, you must have the following files:

  • CA Certificate
  • Client Certificate and Key

KafkaSource expects these files to be in PEM format. If they are in another format, such as JKS, convert them to PEM.

  1. Create the certificate files as secrets in the namespace where KafkaSource is going to be set up, by running the commands:

    1. kubectl create secret generic cacert --from-file=caroot.pem
    1. kubectl create secret tls kafka-secret --cert=certificate.pem --key=key.pem

  2. Apply the KafkaSource. Modify the bootstrapServers and topics fields accordingly.

    1. apiVersion: sources.knative.dev/v1beta1
    2. kind: KafkaSource
    3. metadata:
    4.  name: kafka-source-with-tls
    5. spec:
    6.  net:
    7.    tls:
    8.      enable: true
    9.      cert:
    10.        secretKeyRef:
    11.          key: tls.crt
    12.          name: kafka-secret
    13.      key:
    14.        secretKeyRef:
    15.          key: tls.key
    16.          name: kafka-secret
    17.      caCert:
    18.        secretKeyRef:
    19.          key: caroot.pem
    20.          name: cacert
    21.  consumerGroup: knative-group
    22.  bootstrapServers:
    23.  - my-secure-kafka-bootstrap.kafka:443
    24.  topics:
    25.  - knative-demo-topic
    26.  sink:
    27.    ref:
    28.      apiVersion: serving.knative.dev/v1
    29.      kind: Service
    30.      name: event-display