COPY

Copies data between a file and a table.

Synopsis

  1. COPY <table> [(<column> [, ...])] FROM {'<file>' | PROGRAM '<command>' | STDIN}
  2.      [ [WITH]  
  3.        [ON SEGMENT]
  4.        [BINARY]
  5.        [OIDS]
  6.        [HEADER]
  7.        [DELIMITER [ AS ] '<delimiter>']
  8.        [NULL [ AS ] '<null string>']
  9.        [ESCAPE [ AS ] '<escape>' | 'OFF']
  10.        [NEWLINE [ AS ] 'LF' | 'CR' | 'CRLF']
  11.        [CSV [QUOTE [ AS ] '<quote>'] 
  12.             [FORCE NOT NULL <column> [, ...]]
  13.        [FILL MISSING FIELDS]
  14.        [[LOG ERRORS]  
  15.        SEGMENT REJECT LIMIT <count> [ROWS | PERCENT] ]
  17. COPY {table [(<column> [, ...])] | (<query>)} TO {'<file>' | PROGRAM '<command>' | STDOUT}
  18.       [ [WITH] 
  19.         [ON SEGMENT]
  20.         [BINARY]
  21.         [OIDS]
  22.         [HEADER]
  23.         [DELIMITER [ AS ] 'delimiter']
  24.         [NULL [ AS ] 'null string']
  25.         [ESCAPE [ AS ] '<escape>' | 'OFF']
  26.         [CSV [QUOTE [ AS ] 'quote'] 
  27.              [FORCE QUOTE column [, ...]] ]
  28.       [IGNORE EXTERNAL PARTITIONS ]

Description

COPY moves data between Greenplum Database tables and standard file-system files. COPY TO copies the contents of a table to a file (or multiple files based on the segment ID if copying ON SEGMENT), while COPY FROM copies data from a file to a table (appending the data to whatever is in the table already). COPY TO can also copy the results of a SELECT query.

If a list of columns is specified, COPY will only copy the data in the specified columns to or from the file. If there are any columns in the table that are not in the column list, COPY FROM will insert the default values for those columns.

COPY with a file name instructs the Greenplum Database master host to directly read from or write to a file. The file must be accessible to the master host and the name must be specified from the viewpoint of the master host.

When COPY is used with the ON SEGMENT clause, the COPY TO causes segments to create individual segment-oriented files, which remain on the segment hosts. The file argument for ON SEGMENT takes the string literal <SEGID> (required) and uses either the absolute path or the <SEG_DATA_DIR> string literal. When the COPY operation is run, the segment IDs and the paths of the segment data directories are substituted for the string literal values.

The ON SEGMENT clause allows you to copy table data to files on segment hosts for use in operations such as migrating data between clusters or performing a backup. Segment data created by the ON SEGMENT clause can be restored by tools such as gpfdist, which is useful for high speed data loading.

Warning: Use of the ON SEGMENT clause is recommended for expert users only.

When STDIN or STDOUT is specified, data is transmitted via the connection between the client and the master. STDIN and STDOUT cannot be used with the ON SEGMENT clause.

If SEGMENT REJECT LIMIT is used, then a COPY FROM operation will operate in single row error isolation mode. In this release, single row error isolation mode only applies to rows in the input file with format errors — for example, extra or missing attributes, attributes of a wrong data type, or invalid client encoding sequences. Constraint errors such as violation of a NOT NULL, CHECK, or UNIQUE constraint will still be handled in ‘all-or-nothing’ input mode. The user can specify the number of error rows acceptable (on a per-segment basis), after which the entire COPY FROM operation will be aborted and no rows will be loaded. The count of error rows is per-segment, not per entire load operation. If the per-segment reject limit is not reached, then all rows not containing an error will be loaded and any error rows discarded. To keep error rows for further examination, specify the LOG ERRORS clause to capture error log information. The error information and the row is stored internally in Greenplum Database.

Outputs

On successful completion, a COPY command returns a command tag of the form, where count is the number of rows copied:

  1. COPY <count>

If running a COPY FROM command in single row error isolation mode, the following notice message will be returned if any rows were not loaded due to format errors, where count is the number of rows rejected:

  1. NOTICE: Rejected <count> badly formatted rows.

Parameters

table

The name (optionally schema-qualified) of an existing table.

column

An optional list of columns to be copied. If no column list is specified, all columns of the table will be copied.

When copying in text format, the default, a row of data in a column of type bytea can be up to 256MB.

query

A SELECT or VALUES command whose results are to be copied. Note that parentheses are required around the query.

file

The absolute path name of the input or output file.

PROGRAM ‘command’

Specify a command to execute. The command must be specified from the viewpoint of the Greenplum Database master host system, and must be executable by the Greenplum Database administrator user (gpadmin). The COPY FROM command reads the input from the standard output of the command, and for the COPY TO command, the output is written to the standard input of the command.

The command is invoked by a shell. When passing arguments to the shell, strip or escape any special characters that have a special meaning for the shell. For security reasons, it is best to use a fixed command string, or at least avoid passing any user input in the string.

When ON SEGMENT is specified, the command must be executable on all Greenplum Database primary segment hosts by the Greenplum Database administrator user (gpadmin). The command is executed by each Greenplum segment instance. The <SEGID> is required in the command.

See the ON SEGMENT clause for information about command syntax requirements and the data that is copied when the clause is specified.

STDIN

Specifies that input comes from the client application. The ON SEGMENT clause is not supported with STDIN.

STDOUT

Specifies that output goes to the client application. The ON SEGMENT clause is not supported with STDOUT.

ON SEGMENT

Specify individual, segment data files on the segment hosts. Each file contains the table data that is managed by the primary segment instance. For example, when copying data to files from a table with a COPY TO...ON SEGMENT command, the command creates a file on the segment host for each segment instance on the host. Each file contains the table data that is managed by the segment instance.

The COPY command does not copy data from or to mirror segment instances and segment data files.

The keywords STDIN and STDOUT are not supported with ON SEGMENT.

The <SEG_DATA_DIR> and <SEGID> string literals are used to specify an absolute path and file name with the following syntax:

  1. COPY <table> [TO|FROM] '<SEG_DATA_DIR>/<gpdumpname><SEGID>_<suffix>' ON SEGMENT;

  • <SEG_DATA_DIR>

    The string literal representing the absolute path of the segment instance data directory for ON SEGMENT copying. The angle brackets ( < and >) are part of the string literal used to specify the path. COPY replaces the string literal with the segment path(s) when COPY is run. An absolute path can be used in place of the <SEG_DATA_DIR> string literal.

    <SEGID>

    The string literal representing the content ID number of the segment instance to be copied when copying ON SEGMENT. <SEGID> is a required part of the file name when ON SEGMENT is specified. The angle brackets are part of the string literal used to specify the file name.

: With COPY TO, the string literal is replaced by the content ID of the segment instance when the COPY command is run.

: With COPY FROM, specify the segment instance content ID in the name of the file and place that file on the segment instance host. There must be a file for each primary segment instance on each host. When the COPY FROM command is run, the data is copied from the file to the segment instance.

When the PROGRAM command clause is specified, the <SEGID> string literal is required in the command, the <SEG_DATA_DIR> string literal is optional. See Examples.

For a COPY FROM...ON SEGMENT command, the table distribution policy is checked when data is copied into the table. By default, an error is returned if a data row violates the table distribution policy. You can deactivate the distribution policy check with the server configuration parameter gp_enable_segment_copy_checking. See Notes.

BINARY

Causes all data to be stored or read in binary format rather than as text. You cannot specify the DELIMITER, NULL, or CSV options in binary mode. See Binary Format.

When copying in binary format, a row of data can be up to 1GB.

OIDS

Specifies copying the OID for each row. (An error is raised if OIDS is specified for a table that does not have OIDs, or in the case of copying a query.)

delimiter

The single ASCII character that separates columns within each row (line) of the file. The default is a tab character in text mode, a comma in CSV mode.

null string

The string that represents a null value. The default is \N (backslash-N) in text mode, and a empty value with no quotes in CSV mode. You might prefer an empty string even in text mode for cases where you don’t want to distinguish nulls from empty strings. When using COPY FROM, any data item that matches this string will be stored as a null value, so you should make sure that you use the same string as you used with COPY TO.

escape

Specifies the single character that is used for C escape sequences (such as \n, \t, \100, and so on) and for quoting data characters that might otherwise be taken as row or column delimiters. Make sure to choose an escape character that is not used anywhere in your actual column data. The default escape character is \ (backslash) for text files or " (double quote) for CSV files, however it is possible to specify any other character to represent an escape. It is also possible to deactivate escaping on text-formatted files by specifying the value ‘ OFF' as the escape value. This is very useful for data such as web log data that has many embedded backslashes that are not intended to be escapes.

NEWLINE

Specifies the newline used in your data files — LF (Line feed, 0x0A), CR (Carriage return, 0x0D), or CRLF (Carriage return plus line feed, 0x0D 0x0A). If not specified, a Greenplum Database segment will detect the newline type by looking at the first row of data it receives and using the first newline type encountered.

CSV

Selects Comma Separated Value (CSV) mode. See CSV Format.

HEADER

Specifies that a file contains a header line with the names of each column in the file. On output, the first line contains the column names from the table, and on input, the first line is ignored.

quote

Specifies the quotation character in CSV mode. The default is double-quote.

FORCE QUOTE

In CSV COPY TO mode, forces quoting to be used for all non- NULL values in each specified column. NULL output is never quoted.

FORCE NOT NULL

In CSV COPY FROM mode, process each specified column as though it were quoted and hence not a NULL value. For the default null string in CSV mode (nothing between two delimiters), this causes missing values to be evaluated as zero-length strings.

FILL MISSING FIELDS

In COPY FROM more for both TEXT and CSV, specifying FILL MISSING FIELDS will set missing trailing field values to NULL (instead of reporting an error) when a row of data has missing data fields at the end of a line or row. Blank rows, fields with a NOT NULL constraint, and trailing delimiters on a line will still report an error.

LOG ERRORS

This is an optional clause that can precede a SEGMENT REJECT LIMIT clause to capture error log information about rows with formatting errors.

Error log information is stored internally and is accessed with the Greenplum Database built-in SQL function gp_read_error_log().

See Notes for information about the error log information and built-in functions for viewing and managing error log information.

SEGMENT REJECT LIMIT count [ROWS | PERCENT]

Runs a COPY FROM operation in single row error isolation mode. If the input rows have format errors they will be discarded provided that the reject limit count is not reached on any Greenplum Database segment instance during the load operation. The reject limit count can be specified as number of rows (the default) or percentage of total rows (1-100). If PERCENT is used, each segment starts calculating the bad row percentage only after the number of rows specified by the parameter gp_reject_percent_threshold has been processed. The default for gp_reject_percent_threshold is 300 rows. Constraint errors such as violation of a NOT NULL, CHECK, or UNIQUE constraint will still be handled in ‘all-or-nothing’ input mode. If the limit is not reached, all good rows will be loaded and any error rows discarded.

Note: Greenplum Database limits the initial number of rows that can contain formatting errors if the SEGMENT REJECT LIMIT is not triggered first or is not specified. If the first 1000 rows are rejected, the COPY operation is stopped and rolled back.

The limit for the number of initial rejected rows can be changed with the Greenplum Database server configuration parameter gp_initial_bad_row_limit. See Server Configuration Parameters for information about the parameter.

IGNORE EXTERNAL PARTITIONS

When copying data from partitioned tables, data are not copied from leaf child partitions that are external tables. A message is added to the log file when data are not copied.

If this clause is not specified and Greenplum Database attempts to copy data from a leaf child partition that is an external table, an error is returned.

See the next section “Notes” for information about specifying an SQL query to copy data from leaf child partitions that are external tables.

Notes

COPY can only be used with tables, not with external tables or views. However, you can write COPY (SELECT * FROM viewname) TO ...

COPY only deals with the specific table named; it does not copy data to or from child tables. Thus for example COPY table TO shows the same data as SELECT * FROM ONLY table``. But COPY (SELECT * FROM table) TO ... can be used to dump all of the data in an inheritance hierarchy.

Similarly, to copy data from a partitioned table with a leaf child partition that is an external table, use an SQL query to select the data to copy. For example, if the table my_sales contains a leaf child partition that is an external table, this command COPY my_sales TO stdout returns an error. This command sends the data to stdout:

  1. COPY (SELECT * from my_sales ) TO stdout

The BINARY keyword causes all data to be stored/read as binary format rather than as text. It is somewhat faster than the normal text mode, but a binary-format file is less portable across machine architectures and Greenplum Database versions. Also, you cannot run COPY FROM in single row error isolation mode if the data is in binary format.

You must have SELECT privilege on the table whose values are read by COPY TO, and INSERT privilege on the table into which values are inserted by COPY FROM. It is sufficient to have column privileges on the columns listed in the command.

Files named in a COPY command are read or written directly by the database server, not by the client application. Therefore, they must reside on or be accessible to the Greenplum Database master host machine, not the client. They must be accessible to and readable or writable by the Greenplum Database system user (the user ID the server runs as), not the client. Only database superusers are permitted to name files with COPY, because this allows reading or writing any file that the server has privileges to access.

COPY FROM will invoke any triggers and check constraints on the destination table. However, it will not invoke rewrite rules. Note that in this release, violations of constraints are not evaluated for single row error isolation mode.

COPY input and output is affected by DateStyle. To ensure portability to other Greenplum Database installations that might use non-default DateStyle settings, DateStyle should be set to ISO before using COPY TO. It is also a good idea to avoid dumping data with IntervalStyle set to sql_standard, because negative interval values might be misinterpreted by a server that has a different setting for IntervalStyle.

Input data is interpreted according to ENCODING option or the current client encoding, and output data is encoded in ENCODING or the current client encoding, even if the data does not pass through the client but is read from or written to a file directly by the server.

When copying XML data from a file in text mode, the server configuration parameter xmloption affects the validation of the XML data that is copied. If the value is content (the default), XML data is validated as an XML content fragment. If the parameter value is document, XML data is validated as an XML document. If the XML data is not valid, COPY returns an error.

By default, COPY stops operation at the first error. This should not lead to problems in the event of a COPY TO, but the target table will already have received earlier rows in a COPY FROM. These rows will not be visible or accessible, but they still occupy disk space. This may amount to a considerable amount of wasted disk space if the failure happened well into a large COPY FROM operation. You may wish to invoke VACUUM to recover the wasted space. Another option would be to use single row error isolation mode to filter out error rows while still loading good rows.

When a COPY FROM...ON SEGMENT command is run, the server configuration parameter gp_enable_segment_copy_checking controls whether the table distribution policy (from the table DISTRIBUTED clause) is checked when data is copied into the table. The default is to check the distribution policy. An error is returned if the row of data violates the distribution policy for the segment instance. For information about the parameter, see Server Configuration Parameters.

Data from a table that is generated by a COPY TO...ON SEGMENT command can be used to restore table data with COPY FROM...ON SEGMENT. However, data restored to the segments is distributed according to the table distribution policy at the time the files were generated with the COPY TO command. The COPY command might return table distribution policy errors, if you attempt to restore table data and the table distribution policy was changed after the COPY FROM...ON SEGMENT was run.

Note: If you run COPY FROM...ON SEGMENT and the server configuration parameter gp_enable_segment_copy_checking is false, manual redistribution of table data might be required. See the ALTER TABLE clause WITH REORGANIZE.

When you specify the LOG ERRORS clause, Greenplum Database captures errors that occur while reading the external table data. You can view and manage the captured error log data.

  • Use the built-in SQL function gp_read_error_log('table\_name'). It requires SELECT privilege on table_name. This example displays the error log information for data loaded into table ext_expenses with a COPY command:

    1. SELECT * from gp_read_error_log('ext_expenses');

    For information about the error log format, see Viewing Bad Rows in the Error Log in the Greenplum Database Administrator Guide.

    The function returns FALSE if table_name does not exist.

  • If error log data exists for the specified table, the new error log data is appended to existing error log data. The error log information is not replicated to mirror segments.

  • Use the built-in SQL function gp_truncate_error_log('table\_name') to delete the error log data for table_name. It requires the table owner privilege This example deletes the error log information captured when moving data into the table ext_expenses:

    1. SELECT gp_truncate_error_log('ext_expenses');

    The function returns FALSE if table_name does not exist.

    Specify the * wildcard character to delete error log information for existing tables in the current database. Specify the string *.* to delete all database error log information, including error log information that was not deleted due to previous database issues. If * is specified, database owner privilege is required. If *.* is specified, operating system super-user privilege is required.

When a Greenplum Database user who is not a superuser runs a COPY command, the command can be controlled by a resource queue. The resource queue must be configured with the ACTIVE_STATEMENTS parameter that specifies a maximum limit on the number of queries that can be executed by roles assigned to that queue. Greenplum Database does not apply a cost value or memory value to a COPY command, resource queues with only cost or memory limits do not affect the running of COPY commands.

A non-superuser can run only these types of COPY commands:

  • COPY FROM command where the source is stdin
  • COPY TO command where the destination is stdout

For information about resource queues, see “Resource Management with Resource Queues” in the Greenplum Database Administrator Guide.

File Formats

File formats supported by COPY.

Text Format

When COPY is used without the BINARY or CSV options, the data read or written is a text file with one line per table row. Columns in a row are separated by the delimiter character (tab by default). The column values themselves are strings generated by the output function, or acceptable to the input function, of each attribute’s data type. The specified null string is used in place of columns that are null. COPY FROM will raise an error if any line of the input file contains more or fewer columns than are expected. If OIDS is specified, the OID is read or written as the first column, preceding the user data columns.

The data file has two reserved characters that have special meaning to COPY:

  • The designated delimiter character (tab by default), which is used to separate fields in the data file.
  • A UNIX-style line feed (\n or 0x0a), which is used to designate a new row in the data file. It is strongly recommended that applications generating COPY data convert data line feeds to UNIX-style line feeds rather than Microsoft Windows style carriage return line feeds (\r\n or 0x0a 0x0d).

If your data contains either of these characters, you must escape the character so COPY treats it as data and not as a field separator or new row.

By default, the escape character is a \ (backslash) for text-formatted files and a " (double quote) for csv-formatted files. If you want to use a different escape character, you can do so using the ESCAPE ASclause. Make sure to choose an escape character that is not used anywhere in your data file as an actual data value. You can also deactivate escaping in text-formatted files by using ESCAPE 'OFF'.

For example, suppose you have a table with three columns and you want to load the following three fields using COPY.

  • percentage sign = %
  • vertical bar = |
  • backslash = \

Your designated delimiter character is | (pipe character), and your designated escape character is * (asterisk). The formatted row in your data file would look like this:

  1. percentage sign = % | vertical bar = *| | backslash = \

Notice how the pipe character that is part of the data has been escaped using the asterisk character (*). Also notice that we do not need to escape the backslash since we are using an alternative escape character.

The following characters must be preceded by the escape character if they appear as part of a column value: the escape character itself, newline, carriage return, and the current delimiter character. You can specify a different escape character using the ESCAPE AS clause.

CSV Format

This format is used for importing and exporting the Comma Separated Value (CSV) file format used by many other programs, such as spreadsheets. Instead of the escaping used by Greenplum Database standard text mode, it produces and recognizes the common CSV escaping mechanism.

The values in each record are separated by the DELIMITER character. If the value contains the delimiter character, the QUOTE character, the ESCAPE character (which is double quote by default), the NULL string, a carriage return, or line feed character, then the whole value is prefixed and suffixed by the QUOTE character. You can also use FORCE QUOTE to force quotes when outputting non-NULL values in specific columns.

The CSV format has no standard way to distinguish a NULL value from an empty string. Greenplum Database COPY handles this by quoting. A NULL is output as the NULL string and is not quoted, while a data value matching the NULL string is quoted. Therefore, using the default settings, a NULL is written as an unquoted empty string, while an empty string is written with double quotes (“”). Reading values follows similar rules. You can use FORCE NOT NULL to prevent NULL input comparisons for specific columns.

Because backslash is not a special character in the CSV format, \., the end-of-data marker, could also appear as a data value. To avoid any misinterpretation, a \. data value appearing as a lone entry on a line is automatically quoted on output, and on input, if quoted, is not interpreted as the end-of-data marker. If you are loading a file created by another application that has a single unquoted column and might have a value of \., you might need to quote that value in the input file.

Note: In CSV mode, all characters are significant. A quoted value surrounded by white space, or any characters other than DELIMITER, will include those characters. This can cause errors if you import data from a system that pads CSV lines with white space out to some fixed width. If such a situation arises you might need to preprocess the CSV file to remove the trailing white space, before importing the data into Greenplum Database.

CSV mode will both recognize and produce CSV files with quoted values containing embedded carriage returns and line feeds. Thus the files are not strictly one line per table row like text-mode files

Note: Many programs produce strange and occasionally perverse CSV files, so the file format is more a convention than a standard. Thus you might encounter some files that cannot be imported using this mechanism, and COPY might produce files that other programs cannot process.

Binary Format

The BINARY format consists of a file header, zero or more tuples containing the row data, and a file trailer. Headers and data are in network byte order.

  • File Header — The file header consists of 15 bytes of fixed fields, followed by a variable-length header extension area. The fixed fields are:

    • Signature — 11-byte sequence PGCOPY\n\377\r\n\0 — note that the zero byte is a required part of the signature. (The signature is designed to allow easy identification of files that have been munged by a non-8-bit-clean transfer. This signature will be changed by end-of-line-translation filters, dropped zero bytes, dropped high bits, or parity changes.)
    • Flags field — 32-bit integer bit mask to denote important aspects of the file format. Bits are numbered from 0 (LSB) to 31 (MSB). Note that this field is stored in network byte order (most significant byte first), as are all the integer fields used in the file format. Bits 16-31 are reserved to denote critical file format issues; a reader should abort if it finds an unexpected bit set in this range. Bits 0-15 are reserved to signal backwards-compatible format issues; a reader should simply ignore any unexpected bits set in this range. Currently only one flag is defined, and the rest must be zero (Bit 16: 1 if data has OIDs, 0 if not).
    • Header extension area length — 32-bit integer, length in bytes of remainder of header, not including self. Currently, this is zero, and the first tuple follows immediately. Future changes to the format might allow additional data to be present in the header. A reader should silently skip over any header extension data it does not know what to do with. The header extension area is envisioned to contain a sequence of self-identifying chunks. The flags field is not intended to tell readers what is in the extension area. Specific design of header extension contents is left for a later release.

  • Tuples — Each tuple begins with a 16-bit integer count of the number of fields in the tuple. (Presently, all tuples in a table will have the same count, but that might not always be true.) Then, repeated for each field in the tuple, there is a 32-bit length word followed by that many bytes of field data. (The length word does not include itself, and can be zero.) As a special case, -1 indicates a NULL field value. No value bytes follow in the NULL case.

    There is no alignment padding or any other extra data between fields.

    Presently, all data values in a COPY BINARY file are assumed to be in binary format (format code one). It is anticipated that a future extension may add a header field that allows per-column format codes to be specified.

    If OIDs are included in the file, the OID field immediately follows the field-count word. It is a normal field except that it is not included in the field-count. In particular it has a length word — this will allow handling of 4-byte vs. 8-byte OIDs without too much pain, and will allow OIDs to be shown as null if that ever proves desirable.

  • File Trailer — The file trailer consists of a 16-bit integer word containing -1. This is easily distinguished from a tuple’s field-count word. A reader should report an error if a field-count word is neither -1 nor the expected number of columns. This provides an extra check against somehow getting out of sync with the data.

Examples

Copy a table to the client using the vertical bar (|) as the field delimiter:

  1. COPY country TO STDOUT WITH DELIMITER '|';

Copy data from a file into the country table:

  1. COPY country FROM '/home/usr1/sql/country_data';

Copy into a file just the countries whose names start with ‘A’:

  1. COPY (SELECT * FROM country WHERE country_name LIKE 'A%') TO 
  2. '/home/usr1/sql/a_list_countries.copy';

Copy data from a file into the sales table using single row error isolation mode and log errors:

  1. COPY sales FROM '/home/usr1/sql/sales_data' LOG ERRORS 
  2.    SEGMENT REJECT LIMIT 10 ROWS;

To copy segment data for later use, use the ON SEGMENT clause. Use of the COPY TO ON SEGMENT command takes the form:

  1. COPY <table> TO '<SEG_DATA_DIR>/<gpdumpname><SEGID>_<suffix>' ON SEGMENT;

The <SEGID> is required. However, you can substitute an absolute path for the <SEG_DATA_DIR> string literal in the path.

When you pass in the string literal <SEG_DATA_DIR> and <SEGID> to COPY, COPY will fill in the appropriate values when the operation is run.

For example, if you have mytable with the segments and mirror segments like this:

  1. contentid | dbid | file segment location 
  2.     0     |  1   | /home/usr1/data1/gpsegdir0
  3.     0     |  3   | /home/usr1/data_mirror1/gpsegdir0 
  4.     1     |  4   | /home/usr1/data2/gpsegdir1
  5.     1     |  2   | /home/usr1/data_mirror2/gpsegdir1

running the command:

  1. COPY mytable TO '<SEG_DATA_DIR>/gpbackup<SEGID>.txt' ON SEGMENT;

would result in the following files:

  1. /home/usr1/data1/gpsegdir0/gpbackup0.txt
  2. /home/usr1/data2/gpsegdir1/gpbackup1.txt

The content ID in the first column is the identifier inserted into the file path (for example, gpsegdir0/gpbackup0.txt above) Files are created on the segment hosts, rather than on the master, as they would be in a standard COPY operation. No data files are created for the mirror segments when using ON SEGMENT copying.

If an absolute path is specified, instead of <SEG_DATA_DIR>, such as in the statement

  1. COPY mytable TO '/tmp/gpdir/gpbackup_<SEGID>.txt' ON SEGMENT;

files would be placed in /tmp/gpdir on every segment. The gpfdist tool can also be used to restore data files generated with COPY TO with the ON SEGMENT option if redistribution is necessary.

Note: Tools such as gpfdist can be used to restore data. The backup/restore tools will not work with files that were manually generated with COPY TO ON SEGMENT.

This example uses a SELECT statement to copy data to files on each segment:

  1. COPY (SELECT * FROM testtbl) TO '/tmp/mytst<SEGID>' ON SEGMENT;

This example copies the data from the lineitem table and uses the PROGRAM clause to add the data to the /tmp/lineitem_program.csv file with cat utility. The file is placed on the Greenplum Database master.

  1. COPY LINEITEM TO PROGRAM 'cat > /tmp/lineitem.csv' CSV;

This example uses the PROGRAM and ON SEGMENT clauses to copy data to files on the segment hosts. On the segment hosts, the COPY command replaces <SEGID> with the segment content ID to create a file for each segment instance on the segment host.

  1. COPY LINEITEM TO PROGRAM 'cat > /tmp/lineitem_program<SEGID>.csv' ON SEGMENT CSV;

This example uses the PROGRAM and ON SEGMENT clauses to copy data from files on the segment hosts. The COPY command replaces <SEGID> with the segment content ID when copying data from the files. On the segment hosts, there must be a file for each segment instance where the file name contains the segment content ID on the segment host.

  1. COPY LINEITEM_4 FROM PROGRAM 'cat /tmp/lineitem_program<SEGID>.csv' ON SEGMENT CSV;

Compatibility

There is no COPY statement in the SQL standard.

See Also

CREATE EXTERNAL TABLE

Parent topic: SQL Command Reference