Tutorial

Introduction to Debezium

Debezium is a distributed platform that turns your existing databases into event streams, so applications can see and respond immediately to each row-level change in the databases.

Debezium is built on top of Apache Kafka and provides Kafka Connect compatible connectors that monitor specific database management systems. Debezium records the history of data changes in Kafka logs, from where your application consumes them. This makes it possible for your application to easily consume all of the events correctly and completely. Even if your application stops unexpectedly, it will not miss anything: when the application restarts, it will resume consuming the events where it left off.

Debezium includes multiple connectors. In this tutorial, you will use the MySQL connector.

Starting the services

Using Debezium requires three separate services: ZooKeeper, Kafka, and the Debezium connector service. In this tutorial, you will set up a single instance of each service using Docker and the Debezium Docker images.

To start the services needed for this tutorial, you must:

• Start Zookeeper

• Start Kafka

• Start a MySQL database

• Start a MySQL command line client

• Start Kafka Connect

Considerations for running Debezium with Docker

This tutorial uses Docker and the Debezium Docker images to run the ZooKeeper, Kafka, Debezium, and MySQL services. Running each service in a separate container simplifies the setup so that you can see Debezium in action.

You should be aware of the following considerations for running Debezium with Docker:

• The containers for ZooKeeper and Kafka are ephemeral.

  ZooKeeper and Kafka would typically store their data locally inside the containers, which would require you to mount directories on the host machine as volumes. That way, when the containers are stopped, the persisted data remains. However, this tutorial skips this setup - when a container is stopped, all persisted data is lost. This way, cleanup is simple when you complete the tutorial.

  For more information about storing persistent data, see the documentation for the Docker images.

• This tutorial requires you to run each service in a different container.

  To avoid confusion, you will run each container in the foreground in a separate terminal. This way, all of the output of a container will be displayed in the terminal used to run it.

  Docker also allows you to run a container in detached mode (with the -d option), where the container is started and the docker command returns immediately. However, detached mode containers do not display their output in the terminal. To see the output, you would need to use the docker logs —follow —name <container-name> command. For more information, see the Docker documentation.

Starting Zookeeper

ZooKeeper is the first service you must start.

Procedure

1. Open a terminal and use it to start ZooKeeper in a container.

   This command runs a new container using version 1.3 of the debezium/zookeeper image:

   $ docker run -it --rm --name zookeeper -p 2181:2181 -p 2888:2888 -p 3888:3888 debezium/zookeeper:1.3

   -it

   The container is interactive, which means the terminal’s standard input and output are attached to the container.

   --rm

   The container will be removed when it is stopped.

   --name zookeeper

   The name of the container.

   -p 2181:2181 -p 2888:2888 -p 3888:3888

   Maps three of the container’s ports to the same ports on the Docker host. This enables other containers (and applications outside of the container) to communicate with ZooKeeper.

2. Verify that ZooKeeper started and is listening on port 2181.

   You should see output similar to the following:

   Starting up in standalone mode
   ZooKeeper JMX enabled by default
   Using config: /zookeeper/conf/zoo.cfg
   2017-09-21 07:15:55,417 - INFO  [main:QuorumPeerConfig@134] - Reading configuration from: /zookeeper/conf/zoo.cfg
   2017-09-21 07:15:55,419 - INFO  [main:DatadirCleanupManager@78] - autopurge.snapRetainCount set to 3
   2017-09-21 07:15:55,419 - INFO  [main:DatadirCleanupManager@79] - autopurge.purgeInterval set to 1
   ...
   port 0.0.0.0/0.0.0.0:2181  (1)

   1	This line indicates that ZooKeeper is ready and listening on port 2181. The terminal will continue to show additional output as ZooKeeper generates it.

Starting Kafka

After starting ZooKeeper, you can start Kafka in a new container.

Procedure

1. Open a new terminal and use it to start Kafka in a container.

   This command runs a new container using version 1.3 of the debezium/kafka image:

   $ docker run -it --rm --name kafka -p 9092:9092 --link zookeeper:zookeeper debezium/kafka:1.3

   -it

   The container is interactive, which means the terminal’s standard input and output are attached to the container.

   --rm

   The container will be removed when it is stopped.

   --name kafka

   The name of the container.

   -p 9092:9092

   Maps port 9092 in the container to the same port on the Docker host so that applications outside of the container can communicate with Kafka.

   --link zookeeper:zookeeper

   Tells the container that it can find ZooKeeper in the zookeeper container, which is running on the same Docker host.

   In this tutorial, you will always connect to Kafka from within a Docker container. Any of these containers can communicate with the kafka container by linking to it. If you needed to connect to Kafka from outside of a Docker container, you would have to set the -e option to advertise the Kafka address through the Docker host (-e ADVERTISED_HOST_NAME= followed by either the IP address or resolvable host name of the Docker host).

2. Verify that Kafka started.

   You should see output similar to the following:

   ...
   2017-09-21 07:16:59,085 - INFO  [main-EventThread:ZkClient@713] - zookeeper state changed (SyncConnected)
   2017-09-21 07:16:59,218 - INFO  [main:Logging$class@70] - Cluster ID = LPtcBFxzRvOzDSXhc6AamA
   ...
   2017-09-21 07:16:59,649 - INFO  [main:Logging$class@70] - [Kafka Server 1], started  (1)

   1	The Kafka broker has successfully started and is ready for client connections. The terminal will continue to show additional output as Kafka generates it.

Starting a MySQL database

At this point, you have started ZooKeeper and Kafka, but you still need a database server from which Debezium can capture changes. In this procedure, you will start a MySQL server with an example database.

Procedure

1. Open a new terminal, and use it to start a new container that runs a MySQL database server preconfigured with an inventory database.

   This command runs a new container using version 1.3 of the debezium/example-mysql image, which is based on the mysql:5.7 image. It also defines and populates a sample inventory database:

   $ docker run -it --rm --name mysql -p 3306:3306 -e MYSQL_ROOT_PASSWORD=debezium -e MYSQL_USER=mysqluser -e MYSQL_PASSWORD=mysqlpw debezium/example-mysql:1.3

   -it

   The container is interactive, which means the terminal’s standard input and output are attached to the container.

   --rm

   The container will be removed when it is stopped.

   --name mysql

   The name of the container.

   -p 3306:3306

   Maps port 3306 (the default MySQL port) in the container to the same port on the Docker host so that applications outside of the container can connect to the database server.

   -e MYSQL_ROOT_PASSWORD=debezium -e MYSQL_USER=mysqluser -e MYSQL_PASSWORD=mysqlpw

   Creates a user and password that has the minimum privileges required by the Debezium MySQL connector.

2. Verify that the MySQL server starts.

   The MySQL server starts and stops a few times as the configuration is modified. You should see output similar to the following:

   ...
   017-09-21T07:18:50.824629Z 0 [Note] mysqld: ready for connections.
   Version: '5.7.19-log'  socket: '/var/run/mysqld/mysqld.sock'  port: 3306  MySQL Community Server (GPL)

Starting a MySQL command line client

After starting MySQL, you start a MySQL command line client so that you access the sample inventory database.

Procedure

1. Open a new terminal, and use it to start the MySQL command line client in a container.

   This command runs a new container using the mysql:5.7 image, and defines a shell command to run the MySQL command line client with the correct options:

   $ docker run -it --rm --name mysqlterm --link mysql --rm mysql:5.7 sh -c 'exec mysql -h"$MYSQL_PORT_3306_TCP_ADDR" -P"$MYSQL_PORT_3306_TCP_PORT" -uroot -p"$MYSQL_ENV_MYSQL_ROOT_PASSWORD"'

   -it

   The container is interactive, which means the terminal’s standard input and output are attached to the container.

   --rm

   The container will be removed when it is stopped.

   --name mysqlterm

   The name of the container.

   --link mysql

   Links the container to the mysql container.

2. Verify that the MySQL command line client started.

   You should see output similar to the following:

   mysql: [Warning] Using a password on the command line interface can be insecure.
   Welcome to the MySQL monitor.  Commands end with ; or \g.
   Your MySQL connection id is 3
   Server version: 5.7.17-log MySQL Community Server (GPL)
   Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.
   Oracle is a registered trademark of Oracle Corporation and/or its
   affiliates. Other names may be trademarks of their respective
   owners.
   Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
   mysql>

3. At the mysql> command prompt, switch to the inventory database:

   mysql> use inventory;

4. List the tables in the database:

   mysql> show tables;
   +---------------------+
   | Tables_in_inventory |
   +---------------------+
   | addresses           |
   | customers           |
   | geom                |
   | orders              |
   | products            |
   | products_on_hand    |
   +---------------------+
   6 rows in set (0.00 sec)

5. Use the MySQL command line client to explore the database and view the pre-loaded data in the database.

   For example:

   mysql> SELECT * FROM customers;
   +------+------------+-----------+-----------------------+
   | id   | first_name | last_name | email                 |
   +------+------------+-----------+-----------------------+
   | 1001 | Sally      | Thomas    | sally.thomas@acme.com |
   | 1002 | George     | Bailey    | gbailey@foobar.com    |
   | 1003 | Edward     | Walker    | ed@walker.com         |
   | 1004 | Anne       | Kretchmar | annek@noanswer.org    |
   +------+------------+-----------+-----------------------+
   4 rows in set (0.00 sec)

Starting Kafka Connect

After starting MySQL and connecting to the inventory database with the MySQL command line client, you start the Kafka Connect service. This service exposes a REST API to manage the Debezium MySQL connector.

Procedure

1. Open a new terminal, and use it to start the Kafka Connect service in a container.

   This command runs a new container using the 1.3 version of the debezium/connect image:

   $ docker run -it --rm --name connect -p 8083:8083 -e GROUP_ID=1 -e CONFIG_STORAGE_TOPIC=my_connect_configs -e OFFSET_STORAGE_TOPIC=my_connect_offsets -e STATUS_STORAGE_TOPIC=my_connect_statuses --link zookeeper:zookeeper --link kafka:kafka --link mysql:mysql debezium/connect:1.3

   -it

   The container is interactive, which means the terminal’s standard input and output are attached to the container.

   --rm

   The container will be removed when it is stopped.

   --name connect

   The name of the container.

   -p 8083:8083

   Maps port 8083 in the container to the same port on the Docker host. This enables applications outside of the container to use Kafka Connect’s REST API to set up and manage new container instances.

   -e CONFIG_STORAGE_TOPIC=my_connect_configs -e OFFSET_STORAGE_TOPIC=my_connect_offsets -e STATUS_STORAGE_TOPIC=my_connect_statuses

   Sets environment variables required by the Debezium image.

   --link zookeeper:zookeeper --link kafka:kafka --link mysql:mysql

   Links the container to the containers that are running ZooKeeper, Kafka, and the MySQL server.

2. Verify that Kafka Connect started and is ready to accept connections.

   You should see output similar to the following:

   ...
   2020-02-06 15:48:33,939 INFO   ||  Kafka version: 2.4.0   [org.apache.kafka.common.utils.AppInfoParser]
   ...
   2020-02-06 15:48:34,485 INFO   ||  [Worker clientId=connect-1, groupId=1] Starting connectors and tasks using config offset -1   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
   2020-02-06 15:48:34,485 INFO   ||  [Worker clientId=connect-1, groupId=1] Finished starting connectors and tasks   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]

3. Use the Kafka Connect REST API to check the status of the Kafka Connect service.

   Kafka Connect exposes a REST API to manage Debezium connectors. To communicate with the Kafka Connect service, you can use the curl command to send API requests to port 8083 of the Docker host (which you mapped to port 8083 in the connect container when you started Kafka Connect).

   These commands use localhost. If you are using a non-native Docker platform (such as Docker Toolbox), replace localhost with the IP address of your Docker host.

   1. Open a new terminal and check the status of the Kafka Connect service:

      $ curl -H "Accept:application/json" localhost:8083/
      {"version":"2.6.0","commit":"cb8625948210849f"}  (1)

      1	The response shows that Kafka Connect version 2.6.0 is running.

   2. Check the list of connectors registered with Kafka Connect:

      $ curl -H "Accept:application/json" localhost:8083/connectors/
      []  (1)

      1	No connectors are currently registered with Kafka Connect.

Deploying the MySQL connector

After starting the Debezium and MySQL services, you are ready to deploy the Debezium MySQL connector so that it can start monitoring the sample MySQL database (inventory).

At this point, you are running the Debezium services, a MySQL database server with a sample inventory database, and the MySQL command line client that is connected to the database. To deploy the MySQL connector, you must:

• Register the MySQL connector to monitor the inventory database

  After the connector is registered, it will start monitoring the database server’s binlog and it will generate change events for each row that changes.

• Watch the MySQL connector start

  Reviewing the Kafka Connect log output as the connector starts helps you to better understand each task it must complete before it can start monitoring the binlog.

Registering a connector to monitor the inventory database

By registering the Debezium MySQL connector, the connector will start monitoring the MySQL database server’s binlog. The binlog records all of the database’s transactions (such as changes to individual rows and changes to the schemas). When a row in the database changes, Debezium generates a change event.

Procedure

1. Review the configuration of the Debezium MySQL connector that you will register.

   Before registering the connector, you should be familiar with its configuration. In the next step, you will register the following connector:

   {
     "name": "inventory-connector",  (1)
     "config": {  (2)
       "connector.class": "io.debezium.connector.mysql.MySqlConnector",
       "tasks.max": "1",  (3)
       "database.hostname": "mysql",  (4)
       "database.port": "3306",
       "database.user": "debezium",
       "database.password": "dbz",
       "database.server.id": "184054",  (5)
       "database.server.name": "dbserver1",  (5)
       "database.include.list": "inventory",  (6)
       "database.history.kafka.bootstrap.servers": "kafka:9092",  (7)
       "database.history.kafka.topic": "schema-changes.inventory"  (7)
     }
   }

   1	The name of the connector.
   2	The connector’s configuration.
   3	Only one task should operate at any one time. Because the MySQL connector reads the MySQL server’s binlog, using a single connector task ensures proper order and event handling. The Kafka Connect service uses connectors to start one or more tasks that do the work, and it automatically distributes the running tasks across the cluster of Kafka Connect services. If any of the services stop or crash, those tasks will be redistributed to running services.
   4	The database host, which is the name of the Docker container running the MySQL server (mysql). Docker manipulates the network stack within the containers so that each linked container can be resolved with /etc/hosts using the container name for the host name. If MySQL were running on a normal network, you would specify the IP address or resolvable host name for this value.
   5	A unique server ID and name. The server name is the logical identifier for the MySQL server or cluster of servers. This name will be used as the prefix for all Kafka topics.
   6	Only changes in the inventory database will be detected.
   7	The connector will store the history of the database schemas in Kafka using this broker (the same broker to which you are sending events) and topic name. Upon restart, the connector will recover the schemas of the database that existed at the point in time in the binlog when the connector should begin reading.

   For more information about connector configuration properties, see MySQL connector configuration properties.

2. Open a new terminal, and use the curl command to register the Debezium MySQL connector.

   This command uses the Kafka Connect service’s API to submit a POST request against the /connectors resource with a JSON document that describes the new connector (called inventory-connector).

   This command uses localhost to connect to the Docker host. If you are using a non-native Docker platform, replace localhost with the IP address of of your Docker host.

   $ curl -i -X POST -H "Accept:application/json" -H "Content-Type:application/json" localhost:8083/connectors/ -d '{ "name": "inventory-connector", "config": { "connector.class": "io.debezium.connector.mysql.MySqlConnector", "tasks.max": "1", "database.hostname": "mysql", "database.port": "3306", "database.user": "debezium", "database.password": "dbz", "database.server.id": "184054", "database.server.name": "dbserver1", "database.include.list": "inventory", "database.history.kafka.bootstrap.servers": "kafka:9092", "database.history.kafka.topic": "dbhistory.inventory" } }'

   Windows users may need to escape the double-quotes. For example: $ curl -i -X POST -H “Accept:application/json” -H “Content-Type:application/json” localhost:8083/connectors/ -d ‘{ \”name\”: \”inventory-connector\”, \”config\”: { \”connector.class\”: \”io.debezium.connector.mysql.MySqlConnector\”, \”tasks.max\”: \”1\”, \”database.hostname\”: \”mysql\”, \”database.port\”: \”3306\”, \”database.user\”: \”debezium\”, \”database.password\”: \”dbz\”, \”database.server.id\”: \”184054\”, \”database.server.name\”: \”dbserver1\”, \”database.include.list\”: \”inventory\”, \”database.history.kafka.bootstrap.servers\”: \”kafka:9092\”, \”database.history.kafka.topic\”: \”dbhistory.inventory\” } }’ Otherwise, you might see an error like the following: {“error_code”:500,”message”:”Unexpected character (‘n’ (code 110)): was expecting double-quote to start field name\n at [Source: (org.glassfish.jersey.message.internal.ReaderInterceptorExecutor$UnCloseableInputStream); line: 1, column: 4]”}

3. Verify that inventory-connector is included in the list of connectors:

   $ curl -H "Accept:application/json" localhost:8083/connectors/
   ["inventory-connector"]

4. Review the connector’s tasks:

   $ curl -i -X GET -H "Accept:application/json" localhost:8083/connectors/inventory-connector

   You should see a response similar to the following (formatted for readability):

   HTTP/1.1 200 OK
   Date: Thu, 06 Feb 2020 22:12:03 GMT
   Content-Type: application/json
   Content-Length: 531
   Server: Jetty(9.4.20.v20190813)
   {
     "name": "inventory-connector",
     ...
     "tasks": [
       {
         "connector": "inventory-connector",  (1)
         "task": 0
       }
     ]
   }

   1	The connector is running a single task (task 0) to do its work. The connector only supports a single task, because MySQL records all of its activities in one sequential binlog. This means the connector only needs one reader to get a consistent, ordered view of all of the events.

Watching the connector start

When you register a connector, it generates a large amount of log output in the Kafka Connect container. By reviewing this output, you can better understand the process that the connector goes through from the time it is created until it begins reading the MySQL server’s binlog.

After registering the inventory-connector connector, you can review the log output in the Kafka Connect container (connect) to track the connector’s status.

The first few lines show the connector (inventory-connector) being created and started:

...
2017-09-21 07:23:59,051 INFO   ||  Connector inventory-connector config updated   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
2017-09-21 07:23:59,550 INFO   ||  Rebalance started   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
2017-09-21 07:23:59,550 INFO   ||  Finished stopping tasks in preparation for rebalance   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
2017-09-21 07:23:59,550 INFO   ||  (Re-)joining group 1   [org.apache.kafka.clients.consumer.internals.AbstractCoordinator]
2017-09-21 07:23:59,556 INFO   ||  Successfully joined group 1 with generation 2   [org.apache.kafka.clients.consumer.internals.AbstractCoordinator]
2017-09-21 07:23:59,556 INFO   ||  Joined group and got assignment: Assignment{error=0, leader='connect-1-4d60cb71-cb93-4388-8908-6f0d299a9d94', leaderUrl='http://172.17.0.7:9092/', offset=1, connectorIds=[inventory-connector], taskIds=[]}   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
2017-09-21 07:23:59,557 INFO   ||  Starting connectors and tasks using config offset 1   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
2017-09-21 07:23:59,557 INFO   ||  Starting connector inventory-connector   [org.apache.kafka.connect.runtime.distributed.DistributedHerder]
...

Further down, you should see output like the following from the connector:

...
2017-09-21 07:24:01,151 INFO   MySQL|dbserver1|task  Kafka version : 0.11.0.0   [org.apache.kafka.common.utils.AppInfoParser]
2017-09-21 07:24:01,151 INFO   MySQL|dbserver1|task  Kafka commitId : cb8625948210849f   [org.apache.kafka.common.utils.AppInfoParser]
2017-09-21 07:24:01,584 INFO   MySQL|dbserver1|task  Found no existing offset, so preparing to perform a snapshot   [io.debezium.connector.mysql.MySqlConnectorTask]
2017-09-21 07:24:01,614 INFO   ||  Source task WorkerSourceTask{id=inventory-connector-0} finished initialization and start   [org.apache.kafka.connect.runtime.WorkerSourceTask]
2017-09-21 07:24:01,615 INFO   MySQL|dbserver1|snapshot  Starting snapshot for jdbc:mysql://mysql:3306/?useInformationSchema=true&nullCatalogMeansCurrent=false&useSSL=false&useUnicode=true&characterEncoding=UTF-8&characterSetResults=UTF-8&zeroDateTimeBehavior=convertToNull with user 'debezium'   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,617 INFO   MySQL|dbserver1|snapshot  Snapshot is using user 'debezium' with these MySQL grants:   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,618 INFO   MySQL|dbserver1|snapshot         GRANT SELECT, RELOAD, SHOW DATABASES, REPLICATION SLAVE, REPLICATION CLIENT ON *.* TO 'debezium'@'%'   [io.debezium.connector.mysql.SnapshotReader]
...

The Debezium log output uses mapped diagnostic contexts (MDC) to provide thread-specific information in the log output, and make it easier to understand what is happening in the multi-threaded Kafka Connect service. This includes the connector type (MySQL in the above log messages), the logical name of the connector (dbserver1 above), and the connector’s activity (task, snapshot and binlog).

In the log output above, the first few lines involve the task activity of the connector, and report some bookkeeping information (in this case, that the connector was started with no prior offset). The next three lines involve the snapshot activity of the connector, and report that a snapshot is being started using the debezium MySQL user along with the MySQL grants associated with that user.

Next, the connector reports the relevant MySQL server settings that it has found. One of the most important is binlog_format, which is set to ROW:

2017-09-21 07:24:01,618 INFO   MySQL|dbserver1|snapshot  MySQL server variables related to change data capture:   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,625 INFO   MySQL|dbserver1|snapshot      binlog_cache_size                             = 32768                                           [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,625 INFO   MySQL|dbserver1|snapshot      binlog_checksum                               = CRC32                                           [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,625 INFO   MySQL|dbserver1|snapshot      binlog_direct_non_transactional_updates       = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,625 INFO   MySQL|dbserver1|snapshot      binlog_error_action                           = ABORT_SERVER                                    [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_format                                 = ROW                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_group_commit_sync_delay                = 0                                               [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_group_commit_sync_no_delay_count       = 0                                               [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_gtid_simple_recovery                   = ON                                              [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_max_flush_queue_time                   = 0                                               [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_order_commits                          = ON                                              [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_row_image                              = FULL                                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_rows_query_log_events                  = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      binlog_stmt_cache_size                        = 32768                                           [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_client                          = utf8                                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_connection                      = utf8                                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_database                        = latin1                                          [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_filesystem                      = binary                                          [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_results                         = utf8                                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_server                          = latin1                                          [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_set_system                          = utf8                                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      character_sets_dir                            = /usr/share/mysql/charsets/                      [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      collation_connection                          = utf8_general_ci                                 [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      collation_database                            = latin1_swedish_ci                               [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      collation_server                              = latin1_swedish_ci                               [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      enforce_gtid_consistency                      = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,626 INFO   MySQL|dbserver1|snapshot      gtid_executed_compression_period              = 1000                                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      gtid_mode                                     = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      gtid_next                                     = AUTOMATIC                                       [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      gtid_owned                                    =                                                 [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      gtid_purged                                   =                                                 [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      innodb_api_enable_binlog                      = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      innodb_locks_unsafe_for_binlog                = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      innodb_version                                = 5.7.19                                          [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      log_statements_unsafe_for_binlog              = ON                                              [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      max_binlog_cache_size                         = 18446744073709547520                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      max_binlog_size                               = 1073741824                                      [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      max_binlog_stmt_cache_size                    = 18446744073709547520                            [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      protocol_version                              = 10                                              [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      session_track_gtids                           = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      slave_type_conversions                        =                                                 [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      sync_binlog                                   = 1                                               [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      system_time_zone                              = UTC                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      time_zone                                     = SYSTEM                                          [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      tls_version                                   = TLSv1,TLSv1.1                                   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      tx_isolation                                  = REPEATABLE-READ                                 [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      tx_read_only                                  = OFF                                             [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      version                                       = 5.7.19-log                                      [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      version_comment                               = MySQL Community Server (GPL)                    [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,627 INFO   MySQL|dbserver1|snapshot      version_compile_machine                       = x86_64                                          [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,628 INFO   MySQL|dbserver1|snapshot      version_compile_os                            = Linux                                           [io.debezium.connector.mysql.SnapshotReader]
...

Next, the connector reports the nine steps that make up the snapshot operation:

...
2017-09-21 07:24:01,628 INFO   MySQL|dbserver1|snapshot  Step 0: disabling autocommit and enabling repeatable read transactions   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,631 INFO   MySQL|dbserver1|snapshot  Step 1: start transaction with consistent snapshot   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,634 INFO   MySQL|dbserver1|snapshot  Step 2: flush and obtain global read lock to prevent writes to database   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,636 INFO   MySQL|dbserver1|snapshot  Step 3: read binlog position of MySQL primary server   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,638 INFO   MySQL|dbserver1|snapshot       using binlog 'mysql-bin.000003' at position '154' and gtid ''   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,638 INFO   MySQL|dbserver1|snapshot  Step 4: read list of available databases   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,638 INFO   MySQL|dbserver1|snapshot       list of available databases is: [information_schema, inventory, mysql, performance_schema, sys]   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,639 INFO   MySQL|dbserver1|snapshot  Step 5: read list of available tables in each database   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,641 INFO   MySQL|dbserver1|snapshot       including 'inventory.customers'   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,641 INFO   MySQL|dbserver1|snapshot       including 'inventory.orders'   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,641 INFO   MySQL|dbserver1|snapshot       including 'inventory.products'   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,641 INFO   MySQL|dbserver1|snapshot       including 'inventory.products_on_hand'   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,642 INFO   MySQL|dbserver1|snapshot       'mysql.columns_priv' is filtered out, discarding   [io.debezium.connector.mysql.SnapshotReader]
...
2017-09-21 07:24:01,670 INFO   MySQL|dbserver1|snapshot      snapshot continuing with database(s): [inventory]   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,670 INFO   MySQL|dbserver1|snapshot  Step 6: generating DROP and CREATE statements to reflect current database schemas:   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,679 INFO   MySQL|dbserver1|snapshot      SET character_set_server=latin1, collation_server=latin1_swedish_ci;   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,724 WARN   MySQL|dbserver1|task  Error while fetching metadata with correlation id 1 : {dbhistory.inventory=LEADER_NOT_AVAILABLE}   [org.apache.kafka.clients.NetworkClient]
2017-09-21 07:24:01,853 INFO   MySQL|dbserver1|snapshot      DROP TABLE IF EXISTS `inventory`.`products_on_hand`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,861 INFO   MySQL|dbserver1|snapshot      DROP TABLE IF EXISTS `inventory`.`customers`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,864 INFO   MySQL|dbserver1|snapshot      DROP TABLE IF EXISTS `inventory`.`orders`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,866 INFO   MySQL|dbserver1|snapshot      DROP TABLE IF EXISTS `inventory`.`products`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,881 INFO   MySQL|dbserver1|snapshot      DROP DATABASE IF EXISTS `inventory`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,889 INFO   MySQL|dbserver1|snapshot      CREATE DATABASE `inventory`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,893 INFO   MySQL|dbserver1|snapshot      USE `inventory`   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,914 INFO   MySQL|dbserver1|snapshot      CREATE TABLE `customers` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `first_name` varchar(255) NOT NULL,
  `last_name` varchar(255) NOT NULL,
  `email` varchar(255) NOT NULL,
  PRIMARY KEY (`id`),
  UNIQUE KEY `email` (`email`)
) ENGINE=InnoDB AUTO_INCREMENT=1005 DEFAULT CHARSET=latin1   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,932 INFO   MySQL|dbserver1|snapshot      CREATE TABLE `orders` (
  `order_number` int(11) NOT NULL AUTO_INCREMENT,
  `order_date` date NOT NULL,
  `purchaser` int(11) NOT NULL,
  `quantity` int(11) NOT NULL,
  `product_id` int(11) NOT NULL,
  PRIMARY KEY (`order_number`),
  KEY `order_customer` (`purchaser`),
  KEY `ordered_product` (`product_id`),
  CONSTRAINT `orders_ibfk_1` FOREIGN KEY (`purchaser`) REFERENCES `customers` (`id`),
  CONSTRAINT `orders_ibfk_2` FOREIGN KEY (`product_id`) REFERENCES `products` (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=10005 DEFAULT CHARSET=latin1   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,937 INFO   MySQL|dbserver1|snapshot      CREATE TABLE `products` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `name` varchar(255) NOT NULL,
  `description` varchar(512) DEFAULT NULL,
  `weight` float DEFAULT NULL,
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=110 DEFAULT CHARSET=latin1   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,941 INFO   MySQL|dbserver1|snapshot      CREATE TABLE `products_on_hand` (
  `product_id` int(11) NOT NULL,
  `quantity` int(11) NOT NULL,
  PRIMARY KEY (`product_id`),
  CONSTRAINT `products_on_hand_ibfk_1` FOREIGN KEY (`product_id`) REFERENCES `products` (`id`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,947 INFO   MySQL|dbserver1|snapshot  Step 7: releasing global read lock to enable MySQL writes   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,949 INFO   MySQL|dbserver1|snapshot  Step 7: blocked writes to MySQL for a total of 00:00:00.312   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,950 INFO   MySQL|dbserver1|snapshot  Step 8: scanning contents of 4 tables while still in transaction   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,953 INFO   MySQL|dbserver1|snapshot  Step 8: - scanning table 'inventory.customers' (1 of 4 tables)   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,958 INFO   MySQL|dbserver1|snapshot  Step 8: - Completed scanning a total of 4 rows from table 'inventory.customers' after 00:00:00.005   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:01,959 INFO   MySQL|dbserver1|snapshot  Step 8: - scanning table 'inventory.orders' (2 of 4 tables)   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,014 INFO   MySQL|dbserver1|snapshot  Step 8: - Completed scanning a total of 4 rows from table 'inventory.orders' after 00:00:00.055   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,016 INFO   MySQL|dbserver1|snapshot  Step 8: - scanning table 'inventory.products' (3 of 4 tables)   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,017 INFO   MySQL|dbserver1|snapshot  Step 8: - Completed scanning a total of 9 rows from table 'inventory.products' after 00:00:00.001   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,018 INFO   MySQL|dbserver1|snapshot  Step 8: - scanning table 'inventory.products_on_hand' (4 of 4 tables)   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,019 INFO   MySQL|dbserver1|snapshot  Step 8: - Completed scanning a total of 9 rows from table 'inventory.products_on_hand' after 00:00:00.001   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,020 INFO   MySQL|dbserver1|snapshot  Step 8: scanned 26 rows in 4 tables in 00:00:00.069   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,020 INFO   MySQL|dbserver1|snapshot  Step 9: committing transaction   [io.debezium.connector.mysql.SnapshotReader]
2017-09-21 07:24:02,021 INFO   MySQL|dbserver1|snapshot  Completed snapshot in 00:00:00.405   [io.debezium.connector.mysql.SnapshotReader]
...

Each of these steps reports what the connector is doing to perform the consistent snapshot. For example, Step 6 involves reverse engineering the DDL create statements for the tables that are being captured. Step 7 releases the global write lock just 0.3 seconds after acquiring it, and Step 8 reads all of the rows in each of the tables and reports the time taken and number of rows found. In this case, the connector completed its consistent snapshot in just 0.38 seconds.

Next, Kafka Connect reports some “errors”. However, you can safely ignore these warnings: these messages just mean that new Kafka topics were created and that Kafka had to assign a new leader for each one:

...
2017-09-21 07:24:02,632 WARN   ||  Error while fetching metadata with correlation id 1 : {dbserver1=LEADER_NOT_AVAILABLE}   [org.apache.kafka.clients.NetworkClient]
2017-09-21 07:24:02,775 WARN   ||  Error while fetching metadata with correlation id 5 : {dbserver1.inventory.customers=LEADER_NOT_AVAILABLE}   [org.apache.kafka.clients.NetworkClient]
2017-09-21 07:24:02,910 WARN   ||  Error while fetching metadata with correlation id 9 : {dbserver1.inventory.orders=LEADER_NOT_AVAILABLE}   [org.apache.kafka.clients.NetworkClient]
2017-09-21 07:24:03,045 WARN   ||  Error while fetching metadata with correlation id 13 : {dbserver1.inventory.products=LEADER_NOT_AVAILABLE}   [org.apache.kafka.clients.NetworkClient]
2017-09-21 07:24:03,179 WARN   ||  Error while fetching metadata with correlation id 17 : {dbserver1.inventory.products_on_hand=LEADER_NOT_AVAILABLE}   [org.apache.kafka.clients.NetworkClient]
...

Finally, the log output shows that the connector has transitioned from its snapshot mode into continuously reading the MySQL server’s binlog:

...
Sep 21, 2017 7:24:03 AM com.github.shyiko.mysql.binlog.BinaryLogClient connect
INFO: Connected to mysql:3306 at mysql-bin.000003/154 (sid:184054, cid:7)
2017-09-21 07:24:03,373 INFO   MySQL|dbserver1|binlog  Connected to MySQL binlog at mysql:3306, starting at binlog file 'mysql-bin.000003', pos=154, skipping 0 events plus 0 rows   [io.debezium.connector.mysql.BinlogReader]
2017-09-21 07:25:01,096 INFO   ||  Finished WorkerSourceTask{id=inventory-connector-0} commitOffsets successfully in 18 ms   [org.apache.kafka.connect.runtime.WorkerSourceTask]
...

Viewing change events

After deploying the Debezium MySQL connector, it starts monitoring the inventory database for data change events.

When you watched the connector start up, you saw that events were written to the following topics with the dbserver1 prefix (the name of the connector):

dbserver1

The schema change topic to which all of the DDL statements are written.

dbserver1.inventory.products

Captures change events for the products table in the inventory database.

dbserver1.inventory.products_on_hand

Captures change events for the products_on_hand table in the inventory database.

dbserver1.inventory.customers

Captures change events for the customers table in the inventory database.

dbserver1.inventory.orders

Captures change events for the orders table in the inventory database.

For this tutorial, you will explore the dbserver1.inventory.customers topic. In this topic, you will see different types of change events to see how the connector captured them:

• Viewing a create event

• Updating the database and viewing the update event

• Deleting a record in the database and viewing the delete event

• Restarting Kafka Connect and changing the database

Viewing a create event

By viewing the dbserver1.inventory.customers topic, you can see how the MySQL connector captured create events in the inventory database. In this case, the create events capture new customers being added to the database.

Procedure

1. Open a new terminal, and use it to start the watch-topic utility to watch the dbserver1.inventory.customers topic from the beginning of the topic.

   The watch-topic utility is very simple and limited in functionality. It is not intended to be used by an application to consume events. In that scenario, you would instead use Kafka consumers and the applicable consumer libraries that offer full functionality and flexibility.

   This command runs the watch-topic utility in a new container using the 1.3 version of the debezium/kafka image:

   $ docker run -it --rm --name watcher --link zookeeper:zookeeper --link kafka:kafka debezium/kafka:1.3 watch-topic -a -k dbserver1.inventory.customers

   -a

   Watches all events since the topic was created. Without this option, watch-topic would only show the events recorded after you start watching.

   -k

   Specifies that the output should include the event’s key. In this case, this contains the row’s primary key.

   The watch-topic utility returns the event records from the customers table. There are four events, one for each row in the table. Each event is formatted in JSON, because that is how you configured the Kafka Connect service. There are two JSON documents for each event: one for the key, and one for the value.

   You should see output similar to the following:

   Using ZOOKEEPER_CONNECT=172.17.0.2:2181
   Using KAFKA_ADVERTISED_LISTENERS=PLAINTEXT://172.17.0.7:9092
   Using KAFKA_BROKER=172.17.0.3:9092
   Contents of topic dbserver1.inventory.customers:
   {"schema":{"type":"struct","fields":[{"type":"int32","optional":false,"field":"id"}],"optional":false,"name":"dbserver1.inventory.customers.Key"},"payload":{"id":1001}}
   ...

   This utility keeps watching the topic, so any new events will automatically appear as long as the utility is running.

2. For the last event, review the details of the key.

   Here are the details of the key of the last event (formatted for readability):

   {
     "schema":{
       "type":"struct",
         "fields":[
           {
             "type":"int32",
             "optional":false,
             "field":"id"
           }
         ],
       "optional":false,
       "name":"dbserver1.inventory.customers.Key"
     },
     "payload":{
       "id":1004
     }
   }

   The event has two parts: a schema and a payload. The schema contains a Kafka Connect schema describing what is in the payload. In this case, the payload is a struct named dbserver1.inventory.customers.Key that is not optional and has one required field (id of type int32).

   The payload has a single id field, with a value of 1004.

   By reviewing the key of the event, you can see that this event applies to the row in the inventory.customers table whose id primary key column had a value of 1004.

3. Review the details of the same event’s value.

   The event’s value shows that the row was created, and describes what it contains (in this case, the id, first_name, last_name, and email of the inserted row).

   Here are the details of the value of the last event (formatted for readability):

   {
     "schema": {
       "type": "struct",
       "fields": [
         {
           "type": "struct",
           "fields": [
             {
               "type": "int32",
               "optional": false,
               "field": "id"
             },
             {
               "type": "string",
               "optional": false,
               "field": "first_name"
             },
             {
               "type": "string",
               "optional": false,
               "field": "last_name"
             },
             {
               "type": "string",
               "optional": false,
               "field": "email"
             }
           ],
           "optional": true,
           "name": "dbserver1.inventory.customers.Value",
           "field": "before"
         },
         {
           "type": "struct",
           "fields": [
             {
               "type": "int32",
               "optional": false,
               "field": "id"
             },
             {
               "type": "string",
               "optional": false,
               "field": "first_name"
             },
             {
               "type": "string",
               "optional": false,
               "field": "last_name"
             },
             {
               "type": "string",
               "optional": false,
               "field": "email"
             }
           ],
           "optional": true,
           "name": "dbserver1.inventory.customers.Value",
           "field": "after"
         },
         {
           "type": "struct",
           "fields": [
             {
               "type": "string",
               "optional": true,
               "field": "version"
             },
             {
               "type": "string",
               "optional": false,
               "field": "name"
             },
             {
               "type": "int64",
               "optional": false,
               "field": "server_id"
             },
             {
               "type": "int64",
               "optional": false,
               "field": "ts_sec"
             },
             {
               "type": "string",
               "optional": true,
               "field": "gtid"
             },
             {
               "type": "string",
               "optional": false,
               "field": "file"
             },
             {
               "type": "int64",
               "optional": false,
               "field": "pos"
             },
             {
               "type": "int32",
               "optional": false,
               "field": "row"
             },
             {
               "type": "boolean",
               "optional": true,
               "field": "snapshot"
             },
             {
               "type": "int64",
               "optional": true,
               "field": "thread"
             },
             {
               "type": "string",
               "optional": true,
               "field": "db"
             },
             {
               "type": "string",
               "optional": true,
               "field": "table"
             }
           ],
           "optional": false,
           "name": "io.debezium.connector.mysql.Source",
           "field": "source"
         },
         {
           "type": "string",
           "optional": false,
           "field": "op"
         },
         {
           "type": "int64",
           "optional": true,
           "field": "ts_ms"
         }
       ],
       "optional": false,
       "name": "dbserver1.inventory.customers.Envelope",
       "version": 1
     },
     "payload": {
       "before": null,
       "after": {
         "id": 1004,
         "first_name": "Anne",
         "last_name": "Kretchmar",
         "email": "annek@noanswer.org"
       },
       "source": {
         "version": "1.3.1.Final",
         "name": "dbserver1",
         "server_id": 0,
         "ts_sec": 0,
         "gtid": null,
         "file": "mysql-bin.000003",
         "pos": 154,
         "row": 0,
         "snapshot": true,
         "thread": null,
         "db": "inventory",
         "table": "customers"
       },
       "op": "c",
       "ts_ms": 1486500577691
     }
   }

   This portion of the event is much longer, but like the event’s key, it also has a schema and a payload. The schema contains a Kafka Connect schema named dbserver1.inventory.customers.Envelope (version 1) that can contain five fields:

   op

   A required field that contains a string value describing the type of operation. Values for the MySQL connector are c for create (or insert), u for update, d for delete, and r for read (in the case of a non-initial snapshot).

   before

   An optional field that, if present, contains the state of the row before the event occurred. The structure will be described by the dbserver1.inventory.customers.Value Kafka Connect schema, which the dbserver1 connector uses for all rows in the inventory.customers table.

   after

   An optional field that, if present, contains the state of the row after the event occurred. The structure is described by the same dbserver1.inventory.customers.Value Kafka Connect schema used in before.

   source

   A required field that contains a structure describing the source metadata for the event, which in the case of MySQL, contains several fields: the connector name, the name of the binlog file where the event was recorded, the position in that binlog file where the event appeared, the row within the event (if there is more than one), the names of the affected database and table, the MySQL thread ID that made the change, whether this event was part of a snapshot, and, if available, the MySQL server ID, and the timestamp in seconds.

   ts_ms

   An optional field that, if present, contains the time (using the system clock in the JVM running the Kafka Connect task) at which the connector processed the event.

   The JSON representations of the events are much longer than the rows they describe. This is because, with every event key and value, Kafka Connect ships the schema that describes the payload. Over time, this structure may change. However, having the schemas for the key and the value in the event itself makes it much easier for consuming applications to understand the messages, especially as they evolve over time. The Debezium MySQL connector constructs these schemas based upon the structure of the database tables. If you use DDL statements to alter the table definitions in the MySQL databases, the connector reads these DDL statements and updates its Kafka Connect schemas. This is the only way that each event is structured exactly like the table from where it originated at the time the event occurred. However, the Kafka topic containing all of the events for a single table might have events that correspond to each state of the table definition. The JSON converter includes the key and value schemas in every message, so it does produce very verbose events. Alternatively, you can use Apache Avro as a serialization format, which results in far smaller event messages. This is because it transforms each Kafka Connect schema into an Avro schema and stores the Avro schemas in a separate Schema Registry service. Thus, when the Avro converter serializes an event message, it places only a unique identifier for the schema along with an Avro-encoded binary representation of the value. As a result, the serialized messages that are transferred over the wire and stored in Kafka are far smaller than what you have seen here. In fact, the Avro Converter is able to use Avro schema evolution techniques to maintain the history of each schema in the Schema Registry.

4. Compare the event’s key and value schemas to the state of the inventory database. In the terminal that is running the MySQL command line client, run the following statement:

   mysql> SELECT * FROM customers;
   +------+------------+-----------+-----------------------+
   | id   | first_name | last_name | email                 |
   +------+------------+-----------+-----------------------+
   | 1001 | Sally      | Thomas    | sally.thomas@acme.com |
   | 1002 | George     | Bailey    | gbailey@foobar.com    |
   | 1003 | Edward     | Walker    | ed@walker.com         |
   | 1004 | Anne       | Kretchmar | annek@noanswer.org    |
   +------+------------+-----------+-----------------------+
   4 rows in set (0.00 sec)

   This shows that the event records you reviewed match the records in the database.